Question about Computers & Internet

1 Answer

Cant display netgear setup page - Computers & Internet

Posted by on

  • 4 more comments 
  • ngear Dec 08, 2008

    Netgear DG834G Router/Modem

    I can access the internet but cant access the settings pages of the DG834G. It starts to load after I have typed in admin and password but only blue background colour and sole lines load. I guess something is blocking it from loading. I use Zone Alarm. Have tried turning off Firewall, Program Control and Privacy but no success. Could be Internet Explorer problem. Havent tried resetting modem as I could lose my internet connection if that didnt work. Looking for another solution.

  • Anonymous Apr 03, 2009

    I have a problem not being able to open my netgear setup page after trying to update the firmware untill i unplug the router

  • Jay Glendenning
    Jay Glendenning May 11, 2010

    Was this router provided by your Internet Service Provider?

  • Big Poppa Marv
    Big Poppa Marv May 11, 2010

    Is t his for your router or NIC card?

  • msmaniac May 11, 2010

    also, the default username=admin and the default password=password

    What happens when you try to open the page? A blank page is displayed or an error message (If you have entered incorrect address for the router, then you will not be able to open the Setup page) is displayed?

  • Jay Glendenning
    Jay Glendenning May 11, 2010

    Is this a brand new router if so it is either 192.168.0.1 or 192.168.1.1

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 65 Answers

  1. Decide on a Netgear router. There are a number of router offerings, and prices and features differ depending on the model. Choose one that meets your needs and fits your price range.
  2. Step 2 Purchase a Netgear router, looking for the best price possible. Consumer electronics shopping sites like NewEgg and TigerDirect often offer good deals on clearance, open boxes or shipping (see Resources below).
  3. Step 3 Place the router by clearing a space on or under a desk. The router should be located centrally to reduce the distance to clients and assure better connections. The location will vary depending on how it will be used. For example, it shouldn't be placed in the corner of a basement if wireless clients all over the house will be using it.
  4. Step 4 Set up and plug in the Netgear router and wait a few seconds for it to boot up. Since the router is essentially a mini-computer, it won't work instantly when it's turned on. While it's booting, the power light should flash. When it's finished booting, the power light should stay solid.
  5. Step 5 Connect a computer to the router, either with a wireless or a wired connection. Reboot the computer to ensure it gets a new IP address from the router via Dynamic Host Configuration Protocol (DHCP).
  6. Step 6 Open the web interface by entering "http://192.168.1.1/" into the address bar of your web browser. If a login screen is presented, use "admin" as the username and either "1234" or "password" as the password.
  7. Step 7 Connect to the Internet, if necessary. Plug your cable modem or DSL modem into the router's WAN port in the back and run the Internet Connectioncant display netgear setup page - mag-glass_10x10.gif Setup Wizard from the web interface.
  8. Step 8 Follow the directions and provide authentication information.
  9. Step 9 Connect more clients. At this point, clients should be able to connect and access the Internet.


GoodLuck ;-)

Posted on May 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Netgear access point cant open configuration page


Typically you should be using configuration software until a real IP can be setup and you either address it statically or turn on DHCP. As for the gateway and other information, on a wireless gateway, it should all be routed through the network. Also, I think you have to be wired to the WAP to access the config page, I don't believe it can be seen over the wireless connection as a security feature.

Aug 02, 2010 | NetGear WG602 54Mbps Wireless G Access...

1 Answer

What is the WEP for NETGEAR?


The WEP is the Network Key that was setup when the router was originally setup. Login to the router and check the setup page. This will display the WEP key that was used to setup the network.

Mar 16, 2010 | Microsoft Xbox 360 Console

1 Answer

Cant play online


You need to login into the router setup page and need to trigger the ports which your play station use,,,you need to change the mtu to 1365 and mac filtering should be disable,,,,firmware should be up to date

Dec 30, 2009 | NetGear DGN2000-100NAS Router

1 Answer

Cant connect to the internet


connect the computer to the router and the modem to the router.
you will need to open the setup page of the router to check the settings of the router.
you can setup router without the cd also.
It is very easy.
Click Here for more info

Dec 04, 2009 | NetGear WGT624 Wireless Router

1 Answer

How to install and will this box allow my desktops(2 of them ) to both be connected to a wireless network?


There are 2 ways to setup Netgear
1. Setup Wizard (which guides you through a setup wizard)
2. Manual Configuration (you need to put all values in router manually)

Here we are not discussing Setup Wizard as Manual configuration is far much easier then auto configuration

To configure (config) Netgear we need to get into router page
To open router config page
1. Open Internet Explorer (Start>>all prog>>Internet Explorer)
2. Type in address bar 192.168.0.1
3. In username box type admin (where it says gateway 192.168.0.1 requires username & password)
4. In password box type password (word password itself)
After this you will find Netgear ADSL Wireless Router Setup page

Here we need to select Basic Settings (as shown below)
basicsettings.jpg


after this you will find next page as

basicsettingsscreen.jpg

Here in this page (Basic Settings Page)

Does your internet connection requires login, Select Yes
Select Encapculation as PPPoE
Login is Username as provided by your ISP
Password is your password for broadband connection as provided by your ISP
Keep Idle timeout as 0

after this simply press apply without changing anything else


Now We Need to click on ADSL Settings Page
adslsettings.jpg


Now on ADSL Setting Page We got only 3 options

adslsettingsscreen.jpg
Multiplexing Method Should be LLC-Based
VPI 0
VCI 35

now just press apply again

By this time your router should be only (you can check it by opening any website on Internet Explorer or by router status option on netgear page)


To Config Wireless

Click on Wireless Option (on left hand side blue panel)

wirelesssettings.jpg


It should display next page as

wirelesssettingsscreen.jpg

Here in this page

Wireless Network Name (SSID) Alpha-Numeric name which would be displayed as your wireless network name

Region Here Select Your Region

Channel: Select whichever channel give you best sighal (9, 11, 13 are recommended)

Keep the TIck on Enable Wireless Access Point

Keep the Tick on Allow Broadcast of Name (SSID)

Can Untick Wireless Isolation

Then Jump to Security Options

Select WPA-PSK (Wi-Fi Protected Access Pre Shared Key)

then in WPA-PSK Security Encryption type in anything of your own choice but alphabets and numbers both should be there and make it between 8 to 63 characters long.
WPA-PSK Security Encryption Key is your password for wireless network

Now Press Apply and your router is ready for wireless too

After doing this you can change MTU (Maximum Transmit Unit) size to 1400 from WAN Setup Option

You can find WAN Setup Option in same blue panel on left hand side of screen

wansetup.jpg

Here you just need to change MTU to 1400 and need not to change any other setting

wansetupscreen.jpg

Now its all done and router is ready to send wireless signal to your system/laptop

Nov 26, 2009 | NetGear WGR614 Wireless Router

1 Answer

I bought a reconditioned netgear router and cant get it working.


go to the netgear website, get the manual for that modle - it will tell you how to reset the router to factory defaults

if you are useing wireless - you have to use a wired connection temporarily to access the setup pages

Jan 02, 2009 | NetGear WGT624 Wireless Router

1 Answer

Broken my setup cd and cant install my netgear router


IF you cannot install the router because the setup CD is broken , you can manually configure the router , If you know how to access the router setup page you can already amnually configure it but if not I will advice you to call Netgear so one of their tech support can walk you through with the manual configuration of the router, this is the number 1-888-638-4327 .....

Hope that helps...........

Sep 14, 2008 | Computers & Internet

1 Answer

Netgear router


Go to routerlogin.net, the username is: admin, and the password is: password, OR 1234.  You can follow the setup wizard or manually assign the IP address.  I hope this helps!

Dec 27, 2007 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...