Question about Symbol Motorola MC3090 Handheld Computer

Open Question

Screen reads, System is temporarily unavailable

Have tried warm and cold reboot

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I copied the Motorola MC9190 content of the Application and Platform folders to the Motorola MC9090 and now it can't move on from the system booting. I tried warm boot, cold boot, clean boot from SD card,...


If it is a Windows Mobile 5 device, reload the OS in full using SD card method. If the device is Windows CE5, you can enter IPL mode by doing a coldboot, and whilst inserting the battery back in the device, press the trigger and put it in the cradle until it enters IPL. Once there, you can either use SD card with the OS Hex files or you can use USB Download from Motorola to download the files sing a cradle from your PC. It will be recognised by the PC as this method does not use Active sync.

Jun 19, 2014 | Symbol Motorola MC9090 Mobile Computer

1 Answer

I copied the Motorola MC9190 content of the Application and Platform folders to the Motorola MC9090 and now it can't move on from the system booting.


Peter
Contact Motorola Solutions Get Support or Zebra Technologies
Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly.

Mark
Motorola Mobility Support

Jun 19, 2014 | Symbol Motorola MC9090 Mobile Computer

1 Answer

I copied the Motorola MC9190 content of the Application and Platform folders to the Motorola MC9090 and now it can't move on from the system booting. I tried warm boot, cold boot, clean boot from SD card,...


You have a virus.....download and run " USB SHOW" program
Try free downloading at cnet downloading or download.com
When you download the program scan your memory and delete all the unknowed files with del+shift keys twice

Jun 19, 2014 | Symbol Motorola MC9090 Mobile Computer

1 Answer

I have two MC9090s where it will not go past the splash screen. It will notify me of whether I did warm boot, cold boot, or if the battery door is open, so it's not frozen at the screen. I've requested...


Press and hold the trigger while cold booting the device. THEN PUT STRAIGHT INTO A POWERED CRADLE (or the loading menu will not display)

If you really struggle contact www.portablesolutions.com to have the units repaired.

Sep 25, 2013 | Symbol MC9090 Mobile Computer Portable...

1 Answer

Motorola MC9090 G oes not cold boot.


Hi,
 
I'vefound this method works best especially on Window Mobile versions, windows CEdoes not seem to have the problem.
  1. Have the battery inserted, 
  2. Remove the battery so its at the first stage of removal,
  3. Hold down the On/Off button and trigger,
  4. Insert the battery, still with On/Off button and trigger held,
  5. As soon as the amber light flashes release the On/Off button and trigger.
  6. Unit will attempt to cold boot and then warm boot,
  7. If it works then it will boot through to the Windows Splash screen or desktop.
  8. If it fails and continuously warm boots, remove the battery fully as soon as it cycles a warm boot.
  9. The terminal will not switch off at this stage and will completely drain the backup battery and RAM, giving you a complete clean cold boot
  10. Leave the battery out fro 20 minutes.
  11. Power on and see how far you get. 
If it stillfails after this I would suggest a complete re-flash of the system. Please posta follow up question on how to do this.
Hopethis helps.
Ifyou need any more help then please do not hesitate to contact us:-
 
helpdesk@biastechnology.com orTEL 01202 620955
http://www.biastechnology.com/

Jun 06, 2010 | Symbol Motorola MC909X-G Series Portable...

1 Answer

Freezes on the warm boot screen MC9000


This can be for a number of reasons.

First thing would be to try and cold boot the device:-

Remove battery half way, hold power button and trigger, push battery in fully until click and then release power and trigger

If that fails next thing would be to try and re-flash the operating system. This is done by using an SD card and loading the latest operating files onto it. The SD card slot is located under the keypad. A cross head screwdriver is required to remove the keypad. Search on symbol software download site for the latest. The download also has a readme with detailed instructions. Once the files are on perform a cold boot.

Remove battery half way, hold power button and trigger, push battery in fully until click and then release power and trigger. Drop the terminal in a cradle so that it runs on external power.

Hope this helps.

If you need any more help then please do not hesitate to contact us:-

http://www.biastechnology.com/

or TEL 01202 620955

Dec 09, 2009 | Symbol MC9000-G Portable Terminal

1 Answer

Freezes on the warm boot screen


Hello jumpmaster. When an MC90XX does this, it means that something has gone wrong with the Operating System file execution. Sometimes a cold-boot can fix it (instructions below). If not, then there is a problem with the OS files. If you purchased your MC90XX from Motorola/Symbol you should be able to download a copy of your OS to reinstall. The file will include a readme.txt that will walk you through the process. I hope this solves your problem. Good luck!
  • To Cold Boot
  1. Press the primary battery release to partially eject the battery.
  2. While the battery is partially released: simultaneously press and release the trigger and power button.
  3. Push the battery back in until it clicks.
  4. The MC90XX should power up and start it's boot-sequence.

Dec 07, 2009 | Symbol MC9000-G Portable Terminal

2 Answers

Unit will not boot. Screen reads


"Check serial Input" is just part of the cycle on boot up. It checks for a key press on boot up so that it can access a hidden menu. A cradle, serial null modem cable and hyper-terminal is required to bring up this menu

You can try and re-install the operating system.

Download the latest image from Intermec (you will need to register) and then load the image onto an SD card.

Remove the front cover just above the scan engine; 2 slot head screws and insert the SD card. Cold boot the device. Take off battery and hit the reset button a few times. Re-install battery.

Image will begin to reload.

Detailed instructions are available with the download.

NOTE: The latest image downloads from Intermec not longer have the Telnet application pre-installed. If you require the telnet client then select a previous version, but then also not that there are usually 2 versions EX25 and non-EX25 scan engine type.

If you need any more help then please do not hesitate to contact us:-

helpdesk@biastechnology.com or TEL 01202 620955
http://www.biastechnology.com/

Oct 29, 2009 | Intermec CK31 Portable Terminal

Not finding what you are looking for?
Symbol Motorola MC3090 Handheld Computer Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Data Collection Terminals Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

pkwc

Level 2 Expert

254 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

74 Answers

Are you a Symbol Data Collection Terminal Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...