Question about HP xw6600 Workstation with 650W 80 PLUS Energy Efficient Chassis w/ LP2465 24-inch Flat Panel Moni... PC Desktop

1 Answer

How can i change boot sequence in HP proliant ML330 Server

Posted by on

  • jason May 11, 2010

    bios ,

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

  1. Power on the workstation, and press the F10 key during the initial boot process to enter the Computer Setup (F10) Utility.
  2. Select your language from the list, and press the Enter key. In the Computer Setup Utilities menu, four headings are displayed: File, Storage, Security , and Advanced . Other headings might be displayed, depending on the workstation.
  3. Use the right arrow key to select Storage .
  4. Use the down arrow key to select Boot Order , and press Enter .
  5. By using + and - key you can chang the sequence
  6. To apply and save changes, press the F10 key, and select File>Save Changes and Exit .
  7. Restart your system

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change boot order bios


At startup, when it asks you about going to setup, hit the F2 key. The boot sequence is in there.

Aug 04, 2013 | HP Workstation Xw6000 PC Desktop

1 Answer

Winfast boot sequence problem


Boot sequence problem? You set the boot sequence permanently in the Bios or System Setup. Normally when you boot the system the screen will tell you what key to hit to get into the Bios or Systems Setup.

You can set the boot sequence temporarily (just for the current boot cycle) by watching the screen when you boot and it will tell you which key to hit to change the boot sequence or boot order.

May 07, 2012 | ASUS PC Desktops

1 Answer

Hi i have HP Proliant ml 150 but i cant install server 2003 . how to install windows server 2003


Windows Server 2003 or Windows XP x64? They're the same operating system as I understand it. You must have 64 bit hardware installed on your computer to run a 64bit operating system.

What errors if any are you seeing when you attempt to install this OS?

Feb 16, 2011 | PC Desktops

1 Answer

My IBM System x 3200 M2 server tries to boot from USB Hard Drives that I have installed for backup purposes. I have tried the config/setup utility (pressing F1 at startup) but cannot find any options to...


To change the startup sequence for PCI devices, start the
Configuration/Setup Utility program, select Start Options from the main
menu, select Startup Sequence; then, select Second device (SCSI) to
AGP slot
PCI slot 1
PCI slot 2
PCI slot 3
PCI slot 4
PCI slot 5

Please rate if Helpful

Thanks

Apr 14, 2010 | IBM SYSTEM X3200 M2 E4600 2.4G 2GB 2MB...

1 Answer

I have hp workstation xw4100 changed battery then the system. system not booting


If as I suspect you changed the CMOS battery, then you will have to set up the system BIOS again to the "Default" configuration. You will have to initialize the Hard Drive, DVD, RAM, Boot Up sequence, all again. Do this and all should be OK. You access the CMOS usually by pressing DEL, or F10, at boot time. Check your manual for exact key.

Jan 28, 2010 | HP Workstation Xw4100 PC Desktop

2 Answers

I have a s3100n hp slim line pavillion and thru hp tech support was advised to do a system recovery. when i tryed to reboot my system some programs were missing and they hp said that i need the recovery...


You must go into the BIOS on boot up and choose to boot from CD-Rom instead of the hard drive. When you first turn on your machine and the HP comes up push F10 key to get into the BIOS. Look for boot priorities and put the CD/DVD Rom in the first boot position (directions on how to move these item up/down are at the bottom of the page)

Then your disks will be useful. Put one in and reboot. It should read you disc and follow instructions from there.

Hope this helps you, good luck

Apr 23, 2009 | HP Hewlett Packard Pavilion Slimline...

1 Answer

I'm having problem about my Hp desktop...


go on BIOS setting and change the booting device sequence. system hard drive make it first in booting sequence.

Mar 25, 2009 | HP Pavilion a1610n PC Desktop

1 Answer

Restarting while formatting


Hi, try to check your pc's cmos setup on boot sequence, you would be needing to set the sequence to boot the system on CD drive first then your hardrive; then disable boot virus protection - this will make your OS installation with no interruption. Then save your cmos changes. you have to put your operating system program installer on your cd drive then watch the message to boot from your cd drive. hope this helps.

Dec 19, 2008 | HP Compaq Business Desktop dx2200 - P4 524...

Not finding what you are looking for?
HP xw6600 Workstation with 650W 80 PLUS Energy Efficient Chassis w/ LP2465 24-inch Flat Panel Moni... PC Desktop Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PC Desktops Experts

Fred Sops

Level 2 Expert

271 Answers

john smith

Level 2 Expert

366 Answers

Gavindu Dileepa

Level 1 Expert

10 Answers

Are you a HP PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...