Question about Kenmore 24902 Top Load Washer

1 Answer

FL ERROR MESSAGE

I have a Kenmore Elite Calypso wash motion wash machine. I cant find the number. I was washing clothes and got a FL where the time displays. What do I do to reset the washer or better yet what causes that error message there is still a little bit of water in the bottom of it. I have unplugged it overnight and when I plug it in I get the same message. I cant find the manual can you help me?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, "FL" flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lock condition in order for "FL" to be displayed. With an overfill condition, the beeper repeats a warning every 10 seconds with no time out. The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit.

Press STOP/CANCEL to clear the display.

Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keeps getting fl error message


Search Results

    Why am I getting an FL error code on a Kenmore Calypso ...

    www.shopyourway.com > Manage My Life > Questions
    I have a Kenmore Calypso washer model 11022062100 and there is water in ... Why am I getting an FL error code on a Kenmore Calypso washing Machine?

Jan 27, 2016 | Washing Machines

1 Answer

Both the coupler and the lid switch have been replaced yet unless you lift and close the lid it won't engage the spin cycle


Search Results

    Why am I getting an FL error code on a Kenmore Calypso ...

    www.shopyourway.com > Manage My Life > Questions
    I have a Kenmore Calypso washer model 11022062100 and there is water in ... Why am I getting an FL error code on a Kenmore Calypso washing Machine?
    fl error code on calypso washer-need help!! - Home Forumsths.gardenweb.com > Home Forums > Laundry RoomJul 22, 2006 - An FL error code keeps flashing on my Calypso Washing Machine. I can't do laundry. Could someone please tell me what I need to do to ..."F dl" light come on - Kenmore Elite HE3 Washing Machinehttps://www.ifixit.com/.../Why+is+the+%22F+dl%22+light+come+o...iFixitThese are the errors for error code F/dL Door Lock Error Condition A Door Lock Error... The Kenmore Elite HE3 is a washing machine by Kenmore. ... On Amazon I was able to get the CCU (Kenmore CCU Central Control Unit .... and a dose of WD40 on those contacts should keep that from misbehaving in the future as well.Kenmore Elite Calypso FL error code - ApplianceBlog

Jan 27, 2016 | Washing Machines

2 Answers

Ld code. It won't drain. Not the drain pump (I changed) and not clogged pipe.


Slow drain code. How high is the outlet pipe ABOVE the machine?

Jan 05, 2016 | Washing Machines

1 Answer

I am getting a FL error message on my kenmore elite calypso?


Mine did the same so,i restarted the machine & put the drain hose in a trash can & let it drain in it.then i restarted it & BAM...it worked great!!!

Sep 12, 2011 | Washing Machines

1 Answer

I GET THE FL DISPLY ON MY KENMORE ELITE CALYPSO WASH MOTION. HOW CAN I REMOVE THAT SO IT CAN START WORKING AGAIN


unplug your washer for 5 minutes and try it...these washers are known to have pump issues..if its older one..the pump can be replaced...if its newer..the motor/ pump has to be bought and replaced...

Jan 22, 2011 | Kenmore Washing Machines

1 Answer

Error code FL and does not drain completly


most probably needs the water pump replaced.  not hard to do if you are a little handy..  there were a lot of problems with this machine regarding the water pumps.

Jul 22, 2010 | Kenmore Washing Machines

2 Answers

Where is the filter located on a kenmore elite calypso washer


reomovethe 3 screws across teh lower acess panel, youll see the filter clean out right behind there , be warned before unscrewing get a plastic bag, or a few towells you will getwet!!!!!!

Mar 17, 2009 | Kenmore Washing Machines

1 Answer

I have kenmore elite calypso wash motion washer and there is a flashing light the reads FL what does this mean.


flood lock you need to drain all water from machine and clean out pump somethimg cloggimg pump

Dec 08, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washer displays FL code Hi Where do I find the model number for my machine. It's a Kenmore Elite Calypso Motion Top Loader? I am getting an error code of FL and need to trouble shoot problem but, I have...


I GOT THIS OFF THE MANUAL, HOPE THIS HELPS.

"FL' (Over Fill) flashes
The washer will beep every 10 seconds with no time-out. The
pump will cycle one half minute on, one half minute off, until
the over fill switch is reset or power is discontinued to the
unit. Press STOP/CANCEL to clear the display. Shut off the
water faucets to the inlet hoses if water continues to flow.

Nov 08, 2007 | Washing Machines

Not finding what you are looking for?
Kenmore 24902 Top Load Washer Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...