Question about Proxim Tsunami MP.11 5012 Outdoor Subscriber Unit - Wireless bridge - EN, Fast E (5012-SUR-US-20)

1 Answer

Unable to reset my tsunami mp.11 5012-sur - Proxim Tsunami MP.11 5012 Outdoor Subscriber Unit - Wireless bridge - EN, Fast E (5012-SUR-US-20)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Use reset button! If you have pushed Reload button, you have too flash new firmware from TFTP server.

Posted on Mar 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have forgot my password to connect to HERO3 wifi


You have another option you can reset your password and press password reset button about 20 second .

Aug 30, 2014 | GoPro Hero3 Silver Edition - 1080p - 11 MP...

1 Answer

Unable to connect my blackberry to wifi. it says unable to authenticate network.


Try a hard reset: With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot 5 minutes.

Also check the wifi encryption is compatible with your phone?
Maybe an option to goto a cafe with a wifi hotspot and try logging in there ... does that work?
cheers.

Oct 22, 2013 | D-Link Dlink Dir-600 Wireless Router...

1 Answer

We need the software of mp.11 5054r


You must provide proof of purchase and proof of ownership to the company -they will send you the software. The 2000 unit has a history and the company keeps track of them like CISCO does.
Please contact the company for further instructions.

May 05, 2010 | Proxim Tsunami MP.11 5054R...

1 Answer

Dear Sir! I am from BSNL I am unable to login NOMADIX AG-2000w+ with username admin and password admin,How to break up the password


Hi,

Every wireless device have a reset button, you just find it and press it your router will be reset.

Regards

Ashly

Feb 02, 2010 | Nomadix AG-2000W 802.11a, 802.11g/b...

1 Answer

Reset button won't work on 2wire 2701HG-s


WELL FIRST OFF YOU CAN'T DO IT YOURSELF YOU HAVE TO HAVE A REPAIR GUY WITH A PASSWORD TO GET IN AND CHANGE IT.

Dec 17, 2008 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

Netgear WG602 wireless router,


Hi, Assuming that the WG602 is fully operational, when you did a hard reset, the router reverted to its original factory setting as you posted. The default pre-configuration: act as a DHCP client; if the WG602 does not find a DHCP server on the Ethernet LAN, it defaults to this IP configuration: DHCP Client - Enable IP Address ? 192.168.0.227 IP Subnet Mask ? 255.255.255.0 Gateway ? 0.0.0.0 Your PC need to be connected via a LAN cable to one of the Ethernet ports of the AP/Router to be able to configure it again to your desired network settings. Further it is necessary likewise to manually configure the connected PC's networking configuration to match the router. Manually configure your PC's IP Address to 192.168.0.228, Subnet Mask ? 255.255.255.0, Gateway - 192.168.0.227. You can now try configuring the router through its web interface (192.168.0.227). This is better explained in the user's manual available at the Netgear site ( Hope this be of some help/idea. Post back should you need additional information. Good luck and kind regards.

Oct 03, 2007 | NetGear WG602 802.11g/b Wireless Access...

Not finding what you are looking for?
Proxim Tsunami MP.11 5012 Outdoor Subscriber Unit - Wireless bridge - EN, Fast E (5012-SUR-US-20) Logo

Related Topics:

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proxim Wireless Access Points Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

noti13

Level 1 Expert

15 Answers

Mike

Level 3 Expert

4331 Answers

Are you a Proxim Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...