Motherboard bois copier software

may be you are not proper install c++ software
after unzipping files you go to bin folder and send exe to desktop who is near ms dos exe .turbo c++ compiler support all mother boards .because turbo c++ has dos e environment and bios has also dos sported.

when you start the computer at the time u press del key contiuons upto the bios page not came then you can set up your settings

WRONG ON THAT I HAVE ALL THE BOIS INFO YOU NEED.

WWW.lemig.umontreal.ca/bois/bois_sg.htm
www.ping.be/bois/numbers.shtml
www.allelec.com
email: [email protected]
www.unicore.com

go on line type in

update bois or upgrade bois
enter

typing in the bois name and date will tell you about any update or chacges and how to get the updates for free'

bois download drives my work also

rod

ps if you want mother information buy the new cpu magizine [ computer powers issue march 2009}

give you mother boards cpu cooling options cpu venders and option and more info check it out

rod

hi all,
can anyone tel me where should i buy the intel D845GVSR mother board.

sastri

I sent my system with intel desktop mother board and IntelPentium 4 processor to a service center for repairng. it cannot take key board and dont step into bios. but the service centre damaged my board and processor now. so how can iknow the prcessor original?

Try this and read the "Instructions for Recovery BIOS Updates" section.
http://downloadmirror.intel.com/17084/eng/BIOS%20Update%20Readme.pdf
Good luck.

Press and hold the Delete key down while powering up. This will allow entry to BIOS.

sir i have a problemmy mother board intell d845 epi/d845gvsr my mother board is cannot desplayed or display is not come but if i remove rame the mother board is give error beaps if i attach ram board is not displayed

Keep on pressing F10 key on your keyboard just after you switch on the CPU. BIOS setting screen will appear. I F10 does not work try F2.

so..let me see..you have 2 mainboards,two video cards.one preocessor and rammsso you have quite some possibilities.
fisrt of all I have to say that just clearing the bios is not a solution..would be better to update it,by downlaoding it from the manuufacturers site and after you made a bootable cd than under dos mode re write the bios..
however you cant see anything without a propper signal with new motherboard.
take the new mother board..
so..chech the rams.if you have more ramm dimms let only one in the board but be sure is the one near the proccesor slot and check it to be well inserted.
-put the video cards first the 8500 one,see what it happends.like an observation:if the hdd is damaged the computer runs showing you the dos mode/you are able to reach the bios
processor damaged-computer can run/blue screen with some infos/it is note  a rule that you can reach the bios
ramms distroyed or put wrong..computer starts/dos mode/able to work in bios
video card damaged -NO SIGNAL AT ALL
moather card damaged-No signal at all.
so think and pay attebtion to the details of the errors.

You can make different tipes if combinations and by elimination youll discover the faulty component.
from now I can only presume is the new mother board
good luck .its a booring work but is nothing you can do more
bye bye