Question about Baby Lock Espire
My baby lock ellure machine is not sewing and the light also is not showing.i have not used it apart from testing it.there is service centre of such machine in my area. Please help me becouse it cost a lot of money. thanks, chtistie
Check the easy stuff first:
Make sure the needle is inserted in the machine properly- a good rule of thumb is the flat side of the needle should go to the opposite side of the last thread guide. Also make sure the machine is threaded correctly.
the needle is in correctly with the flat side to the rear of the machine, make sure to thread the upper and lower portions of the machine correctly.
the needle is in the machine correctly- all the way up into the needle bar, make sure that it is threaded correctly, etc. If this all checks out ok, take the bobbin case out of the machine. There are two ears on either side of the bobbin case- turn the left one to the left and the right one to the right. Remove the silver ring, and inspect the piece of metal that the ring came off of (looks like a circle with the top cut off). You have to locate the hook which is the piece that looks like a half moon inside the big round metal piece. Locate the tip of it, turn the handwheel toward you until the needle is in the lowest position, at this point the tip of the hook should be flush with top of the left side of the cut off circle. If this is not so, your machine needs to be re-timed. If that is the case.
Posted on Aug 04, 2009
i think your best bet would be to order a new manual. i could never have learned how to best operate mine without it! good luck! barbara
Posted on Nov 06, 2009
All you do is clean the bobbin area - no oiling unless stated in the maintenance section of the manual.
If you do not have a manual, the Babylock website may have a download.
Posted on Apr 25, 2010
Testimonial: "Helpful information - easy as could be!"
Tips for a great answer:
Oct 08, 2014 | Baby Lock Ellure
Aug 30, 2014 | Baby Lock Ellure
Aug 22, 2014 | Baby Lock Ellure
Apr 25, 2010 | Baby Lock Ellure
Nov 02, 2009 | Baby Lock Ellure
Jan 23, 2009 | Baby Lock Ellure
Jan 20, 2009 | Baby Lock Ellure
Jan 17, 2009 | Baby Lock Ellure
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: