Question about Sceptre NagaIII X30SV 30 in. HD-Ready LCD Television

1 Answer

Blue then nothing

I have an x30sv-naga III when i turn the tv on it flashes blue as it would, then it goes black, u get audio if your lucky. has any one had this problem and found a salution? , i reallywant to whatch my tv again

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

This is an easy fix! You have a bad "power inverter chipset" To fix this issue you will have to search google for a power inverter for this particular model of lcd. It's basically just the chip that the power cable plugs into on the lcd. More than likely it's going to be cheaper for you just to buy another t.v... Sorry. I know these T.Vs like the back of my hand. I've seen this issue with hundreds of LCDs because I work for a company that fixes them. FYI - It is not your backlight because if that is broken the monitor would not even flash. It is not your VGA because if that was busted you would not see any video.

Posted on Jun 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a Audio/Video cable and Power Cord for my Sceptre 30' LCD TV-X30SV-NAGA III?


They should be fairly generic and most major electronics stores should have them.

On the internet in North America look at MCM or Suburban Electronics as both carry a lot of these items.

Dec 21, 2012 | Sceptre X37sv-Naga 37 in. LCD Television

2 Answers

Sceptre X37sv-Naga powers on no picture


Do you get sound? If you do, then the problem will be in the backlight inverter board. You should have 24vdc presents on the main power supply which supplys the power to the inverter board. Please verify that is the case.

Nov 02, 2009 | Sceptre X37sv-Naga 37 in. LCD Television

1 Answer

Screen goes black after powering up sound is just fine.


The backlight video board inverter it dead,need a new one.

Oct 03, 2009 | Sceptre NagaIII X30SV 30 in. HD-Ready LCD...

1 Answer

Sceptre naga blue screen when tv on then turns blank, sound on


i have a secptre t v turns on for a sec and screen is blue then goes to blank screen can anyone help

Apr 18, 2009 | Sceptre X32BV-Naga 32 in. LCD TV

1 Answer

Where can I get inverter for X30SV-Naga III


when you turn it on there is a saying in the right hand corner saying tv off

Aug 29, 2008 | Sceptre NagaIII X30SV 30 in. HD-Ready LCD...

2 Answers

How to open the back cover of Sceptre of X30SV Naga III


my 42" cover had 2 screws underneath the strip of paper with the symbols on it that show you what the connectors are for.

Nov 29, 2007 | Sceptre X37sv-Naga 37 in. LCD Television

1 Answer

X30SV-NAGA III


So here is the scoop, sceptre told me to fill out an RMA request, fax it in with CC# and it would cost 250.00 as long as it was not the display. Upon approval of the RMA they asked for an additional 80.00 return shipping fee to be added on to the 250.00. Plus it would cost me 35.00 to ship it from Missouri to City of Industry, CA. So as you can tell it would cost me 365.00 just to send it.

Oct 16, 2007 | Sceptre NagaIII X30SV 30 in. HD-Ready LCD...

1 Answer

Replacing Sceptre Power supply


The attached pictures are the back of our TV which is a Sceptre X30SV NAGA III. In ours the power supply is inside the vertical panel on the back right of the TV. The plug goes in the bottom of the panel and you remove the panel with the horizontal louvers with 4 screws to get at the power supply. A replacement power supply is from Delta Electronics part number ADP 180CB B , 24 Volts 7.5 amps 180 Watts that we reordered from here:

http://cgi.ebay.com/Delta-ADP-180CB-B-24V-7-5A-180W-4-Pin-Din_W0QQitemZ160268090373QQcmdZViewItem

Aug 23, 2007 | Sceptre X37sv-Naga 37 in. LCD Television

2 Answers

Screen goes blank after a second


This is an easy fix! You have a bad "power inverter chipset" To fix this issue you will have to search google for a power inverter for this particular model of lcd. It's basically just the chip that the power cable plugs into on the lcd. More than likely it's going to be cheaper for you just to buy another t.v... Sorry. I know these T.Vs like the back of my hand. I've seen this issue with hundreds of LCDs because I work for a company that fixes them. FYI - It is not your backlight because if that is broken the monitor would not even flash. It is not your VGA because if that was busted you would not see any video.

Jun 25, 2007 | Sceptre NagaIII X30SV 30 in. HD-Ready LCD...

Not finding what you are looking for?
Sceptre NagaIII X30SV 30 in. HD-Ready LCD Television Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sceptre Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Sceptre Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...