Question about Price Pfister Marielle Kitchen Faucet with Matching Spray and Soap ...

1 Answer

Loss of pressure in kitchen faucet - Price Pfister

Main water line seems to have adequate pressure on nearby sinks and with the kitchen sink spray hose. Faucet has a hot and cold tap and both have low pressure. Filter screen on faucet is clean and clear. Pressure seems to increase when we use the spray hose. Pressure off main spout may be slightly increased but drops gradually after spray hose is turned off.

Posted by on

  • 2 more comments 
  • Anonymous Jan 07, 2009

    I have the same problem with my Price Pfister Marielle Kitchen Faucet. Did this work?

  • pazzaglini Jan 28, 2009

    I had the same problem with my Price Pfister Marielle faucet and I replace the diverter (pn 951-039) and that did the trick. The faucet is working like new! Thank you.

  • basshole Mar 26, 2009

    I have the same problem with the pfister marielle, bunches have the same problem, becareful with the recommeded solutions.

    1. 951-039 is the plastic diverter and will not work if you have a brass diverter. part# (brass) 951-029 (call price pfister to make sure.)
    2. this could also be the cartridge, 974-035.

    the aggravating thing is that you can find similar parts local, but there are no translation from suppliers part number to the manufacturer and nothing on the packaging otherwise specifying. lame. in short, call price pfister and moan about this expensive good for nothing faucet that has parts have to purchase through them.

    ridiculous. never buying price pfister again.

  • Anonymous Mar 17, 2014

    when filling sink the handle slowly goes down and water stops unless I hold handle up

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 33 Answers

Your problem is a simple one.

  1. Turn off water to faucet.
  2. Place a towel(s) in the base of the sink(s) to prevent any parts from going down drain.
  3. Remove the handle to the faucet. (single handle only)
  4. If not a single handle then remove spout from faucet.
  5. If a single handle remove cap carefully and any loose parts.
  6. Gently turn spout side to side while lifting to remove.
  7. You will see a hole with a very small valve where the water comes out to the spout on the base of the faucet.
Loss of pressure in kitchen faucet - Price Pfister - c262d3c.jpg
  1. Remove this valve (which is a backflow preventer) and replace.
  2. Reassemble and test.
Problem solved.

Posted on Dec 05, 2008

  • jim murray
    jim murray Mar 06, 2014

    this is a model f0264cbs

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a replacement handle, including all the parts and hoses, on my Price Pfister Marielle kitchen faucet model # T26-4NEE


Most new kitchen faucets feature single-handle control levers and washerless designs that rarely require maintenance. Additional features include brushed metallic finishes, detachable spray nozzles, or even push-button controls.Connect the faucet to hot and cold water lines with easy-to-install flexible supply tubes made-from vinyl or braided steel. If your faucet has a separate sprayer, install the sprayer first. Pull the sprayer hose through the sink opening and attach to the faucet body before installing the faucet.

Where local codes allow, use plastic tubes for drain hookups. A wide selection of extensions and angle fittings lets you easily plumb any sink configuration. Manufacturers offer kits that contain all the fittings needed for attaching a food disposer or dishwasher to the sink drain system.

Jul 26, 2012 | Price Pfister Marielle Kitchen Rustic...

1 Answer

How do I replace the flange on the side sprayer? The sprayer and hose are intact but the part of the flange that screws broke and has to be replaced. Quesiton is where do I disconnect the hose so I can...


The hose that goes to the Sprayer has to be disconnected under the sink at the main connection there, then it can be pulled up and out of the top of sink. the you can unscrew the nut under the sink on the flange and remove and replace.

Aug 28, 2011 | Price Pfister Marielle Kitchen Faucet with...

1 Answer

Faucets won't turn off


Open your cubbards under the sink and look for (2) valves/angle stops. then turn them to the right until the water stops running.
If this doesn't work you'll have to find any isolation valves down line or kill the house supply at the No.1 valve At your water meter.

Dec 23, 2010 | Price Pfister Marielle Kitchen Faucet with...

2 Answers

Low pressure to the main faucet, great pressure to the side spray


try un-screwing the screen on the end where the water comes out. Could be clogged

May 01, 2010 | Price Pfister Marielle Kitchen Faucet with...

1 Answer

Kitchen Sink Single handle faucet ''pressure'' problem


By replacing the ceramic cartidge inside, however to replace it requires dismantling the tap (Mains off of course) and matching a new unit. Usually cheaper to buy a new tap.

Feb 24, 2010 | Price Pfister 34-3LC Genesis Kitchen...

1 Answer

Low hot water pressure on newly installed kitchen faucet


it souns like a factory flaw in the piping or whoever hooked it up, over bent or kinked the line

Aug 31, 2009 | Plumbing

2 Answers

Water runs slow


Three possible reasons for low pressure. 1. faucet cartridge has debris in valve body. 2. aerator has debris ,just unscrew and clean out. 3. Water valves under sink are not opened up. hope this helps

Jul 30, 2009 | Price Pfister Marielle Kitchen Faucet with...

1 Answer

''poor pressure hot water only on new 531 series''


If you remove the supply line from the faucet and open the valve into a bucket, do you have adequate pressure? If you do, you will need to remove the hot water stem to see if something washed up into the faucet when you first turned the water on.

Apr 10, 2009 | Price Pfister Savannah Two-Handle Kitchen...

Not finding what you are looking for?
Price Pfister Marielle Kitchen Faucet with Matching Spray and Soap ... Logo

4,326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Price Pfister Plumbing Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

john h

Level 3 Expert

8286 Answers

Mike

Level 3 Expert

4334 Answers

Are you a Price Pfister Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...