Question about Teac T-H500 2 Channels Tuner

Open Question

Teac T-H500 Tuner Preset

I have the above tuner, but have lost the instruction maual. I want to know how to program the preset channels

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 44 Answers

SOURCE: How do I set the

Hello,
You'll want to turn on "tuning mode" by pressing the button. Push the number preset you want to store it in, tune it to the station you want to save, then press and hold down the "memory set" button for awhile. The display should flash or some other indication that it is stored. When this is all done test the preset button by pushing it. If it stayed on the same station, it was successful.

I hope this helps.

Posted on Aug 20, 2008

Marcos_Ce
  • 71 Answers

SOURCE: CR-H100 CD/Tuner/ Amplifier. New about

These resceivers have a bulit-in device to retain some electricity to feed backup memory. It can be a battery or a capacitor and I think they have reached their time to be replaced.

Posted on Nov 22, 2008

  • 2 Answers

SOURCE: onkyo tuner

The manual is pretty easily accessible on Onkyo's website. http://www.ch.onkyo.com/files.download/tx-sr605_manual_e.pdf

Setting a preset is as easy as pressing "Memory", using the arrows to select a number, and pressing "Memory" again.

To DELETE a preset, press and hold "Memory" then press "Tuning Mode".



Posted on Nov 08, 2009

nokurajesh
  • 101 Answers

SOURCE: How do I set the preset stations on my Technics

press and hold the station button for 10 seconds

Posted on Jan 10, 2010

dunnbiker
  • 8546 Answers

SOURCE: How do I preset the tuner for radio stations. I've

Not very specific. Do you have the manual?

The following is from a VSX-03TXH manual. It ain't pretty but it may help.

I'm posting it in multiple parts due to space contraints.

37

Chapter 6:

Using the tuner

Listening to the radio

The following steps show you how to tune in to FM and

AM radio broadcasts using the automatic (search) and

manual (step) tuning functions. If you already know the

frequency of the station you want, see Tuning directly to a

station below. Once you are tuned to a station you can

memorize the frequency for recall later-see Saving

station presets below for more on how to do this.

1 Press the FM/AM button to select the tuner.

2 Use the FM/AM button to change the band (FM or

AM), if necessary.

Each press switches the band between FM and AM.

3 Tune to a station.

There are three ways to do this:

Automatic tuning

To search for stations in the currently selected band,

press and hold TUNE ?©/?? for about a second. The

receiver will start searching for the next station,

stopping when it has found one. Repeat to search for

other stations.

Manual tuning

To change the frequency one step at a time, press

TUNE ?©/??.

High speed tuning

Press and hold TUNE ?©/?? for high speed tuning.

Release the button at the frequency you want.

Improving FM stereo sound

If the TUNED or STEREO indicators don't light when

tuning to an FM station because the signal is weak, press

the MPX button to switch the receiver into mono

reception mode. This should improve the sound quality

and allow you to enjoy the broadcast.

Using Neural THX

This feature uses Neural Surround™, THX® technology to

achieve optimal surround sound from FM radio.

• While listening to FM radio, press AUTO/DIRECT for
Neural THX listening.

Posted on Dec 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset am and fm channels on a kenwood stereo synthesiser am/fm tuner kt-57?


Trisha, I beleive you use your autoscan feature, when it stops on a station you want to keep press and hold one of the preset buttons.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Keenwood KT 57 digital tuner
ORIGINAL OWNERS MANUAL FOR KENWOOD KT 57 TUNER0 results You may also like

Jun 25, 2016 | Kenwood Car Audio & Video

1 Answer

Forgot how to programme radio stations on Philips Micro System MC-222


Tuning to radio stations

  1. 1 Select TUNER source. ? TUNER is displayed briefly.
  2. 2 Press BAND once or more to select your
    waveband.
  1. 3 Press down on TUNING a? or a? and release button.
    ? The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH.? If a FM station is received in stereo, STEREO is shown.
  2. 4 Repeat step 3 if necessary until you find the desired station.
To tune to a weak station, press TUNING briefly and repeatedly until you have found optimal reception.


Programming radio stations
You can store up to a total of 40 radio stations in the memory.
Automatic programming
Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only programme stations which are not in the memory already.
Press PRESET 3 or 4 (on the remote control ¡ or TM ) to select the preset number where programming should start.
Note:
- If no preset number is selected, default is preset (1) and all your presets will be overridden.
Press PROGRAM for more than 2 seconds to activate programming.? AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by MW and LW.The last preset automatically stored will then be played.
Manual programming
Tune to your desired station (see "Tuning to radio stations").
Press PROGRAM to activate programming. ? PROGRAM flashes in the display.
Press PRESET 3 or 4 (on the remote control ¡ or TM ) to allocate a number from 1 to 40 to this station.
Press PROGRAM again to confirm the setting. ? PROGRAM disappears, the preset number and the frequency of the preset station are shown.
Repeat the above four steps to store other stations.

Jun 19, 2016 | Philips Audio Players & Recorders

1 Answer

How do i change tuner channels


This is a power amp, change the channels on the tuner:

May 26, 2014 | Teac A-H500 Amplifier

1 Answer

Programming FM tuner preset buttons


scan for the station when you have the station hold the number button you would like the station to be on in until it flashes when flashing leave and push memory or dont push memory and wait until it stops.

Dec 28, 2013 | Audio Players & Recorders

1 Answer

How do I add the HD channels picked up my HD antenna to the master channel list on my Visio TV?


Hello, with the set on, press the menu button, move the cursor down till the "Tuner" section is hi-lighted, click on it. Then the first selection is "Tuner Mode" click on it, the choose "Antenna" click on it. Then move to the "Auto Channel Scan" and click on it, and let it set all your channels. when done, just exit menu and change channels as desired. you can go to page 39 in your manual for these instructions: Tuner Mode
Select Cable or Antenna depending
upon which equipment you have
attached to the DTV / TV Input.
Auto Channel Search
Automatically search for TV channels
that are available in your area. Be
sure to first select the correct tuner
mode above. The TV will search for
analog and digital channels. When the
search is done, press EXIT to begin
watching your programs. thanks, Terry

Oct 09, 2012 | Vizio M220NV 22 in. LCD TV

1 Answer

I just bought the RCA CD/DVD home theater system RTD206. I cant figure out how to change the radio channels. Also cant figure out how to change the cd disk tracks. Does this system have a remote. Or do...


The system does have a remote (at least it should come with one if purchased new), and you need it to control pretty much everything. Here's what the manual says about the radio tuner (you can find the whole manual here) :

Manual Tuning
1. Connect the FM aerial and the AM loop antenna at the back of the unit. Rotate the AM loop for
better reception.
2. Press TUNER to enter TUNER mode and toggle between FM and AM.
3. When the FM station broadcasts Stereo sound, ST is displayed.
4. Tune a station by pressing repeatedly the TUNER+/- buttons until the desired station is found.
Alternatively, you can press and hold the same buttons down for about one second to activate
the automatic search function. In this mode the player will automatically tune frequencies until
it finds a station.
5. Repeat step 4 to tune to another radio station.

Storing radio stations
The player can store up to 30 radio stations in its memory. You can enter every single radio station
yourself or the player can store all available radio stations automatically in ascending order.
Automatic preset programming
1. Press TUNER to enter the Tuner mode.
2. Press and hold TUNER down for 3 seconds to start automatic preset programming.
Note: A weak signal can affect the "Automatic preset programming" function's efficiency. Adjust the aerial for better
reception and a more efficient search.
3. Radio frequencies will be browsed and radio stations stored automaitcally. When all the available
radio stations are stored or all 30 memory locations are full, the auto preset programming
function will stop.

Manual preset
1. Tune to a radio station (see "Manual tuning" for details).
2. Press MEMORY once to enter flashing Preset Loaction number.
3. While the Preset Location number is still flashing, input your desired preset number (1-30) using
the numeric buttons or press the CH+/- buttons, then press MEMORY to store it.

Retrieving preset stations
1. Press TUNER to enter the Tuner mode.
2. Press CH+/- to search up or down for the preset stations or directly press the numeric buttons.

As you see, you really need that remote. The same is true for disc play. While there are front panel buttons for play/stop, disc skip, and drawer open/close, you don't have any other control without the remote. Without the remote control you'll find this system won't do too much, unfortunately. If you bought this new, check the packing material before you throw it away to make sure the remote's not still somewhere in the box. They often come tucked into slots on the foam inserts.

Also, when you hook the unit to a TV, it's just using the TV as a video display device. The TV has nothing to do with any of the system's other functions.

I hope you have luck locating the remote! Thanks for using Fixya.

Jun 29, 2011 | Audio Players & Recorders

1 Answer

How can I receive and record cable channels on my Sony SLV 750 vcr? The tuner only displays channels 1-99 on the vcr. Thank you.


I will be assuming you have analog cable TV service, no cable box. If you have a cable box, the instructions would be different.

There are many steps to properly setup your Sony VCR and they should ALL be setup to correctly record channels, however just to cover your question here....

Press MENU on the remote control for the VCR and you should see on your TV screen, the main menu options. Select TUNER PRESET. Press OK. Set Antenna/Cable to CABLE. Next Select AUTO-PRESET. Available channels will be scanned. This may take a few mins. so be patient. Channels could go up to 125. This should make available cable channels ready to record/view.

You can ADD or Delete a specific channel also if one is missed or undesired by selecting MANUAL SET.

Feb 11, 2011 | Sony SLV-798HF VHS VCR

1 Answer

HOW DO YOU GET CHANNELS REPROGRAMED INTO THE TV?


Hello

Auto presetting channels you wish to know I thinks, if so do the following.

To preset a channel or to change a preset channel, follow the procedure below.

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel) ? or ? button to point to "CHANNEL SET".

Then, press the VOL(ume) ? button.

4) Press the CH(annel) ? or ? button to point to "AUTO PRESET CH".

Then, press the VOL(ume) ? button.

The tuner scans and memorizes all active channels in your area.

? The TV distinguishes between standard TV channels and cable (CATV)

channels.

? When AUTO PRESET CH action is completed, the lowest memorized

channel reappears on the screen.

? When you press the CH(annel) ? or ? button after selecting "AUTO PRESET CH",

the tuner will stop at the memorized channels only.

? The TV may recognize TV channels to be CATV channels by receiving conditions. In this case,

try AUTO PRESET CH action again in the fine receiving conditions.

? When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS"
will appear on the display after the completion of channel scanning.
OK.

Jan 11, 2011 | Emerson EWF2004 20" TV

1 Answer

I can't figure out how to set the radio station pre sets


hi,
there is no auto presetting available. u have to set all channels in preset manually. if u power off the subwoofer all setting will be erased.for manual preset do the following.


1. Press the FUNCTION button to select "TUNER".
2. Press the FM/AM button to select a band.
3. Select the station you want to listen to (Hold down the TUNING Up or Down button until the
frequency display begins to change. When a station is tuned in, the tuning process will stop automatically.)

when it tune the first station available do the following to preset it,
4 .Press the MEMORY button.( on remote)
5. Within 5 seconds, select a preset channel to store the
station using the PRESET buttons of the remote control
unit.
6. Within 5 seconds, press the MEMORY button.(The station is stored and the MEMORY indicator goes off. To store more stations, repeat steps 3 to 6) .

for listening preset ed station ,Press the PRESET button repeatedly until the desired
preset station is found.
ok

Dec 24, 2010 | Teac CD-X9 Shelf System

1 Answer

What buton do press to get the channels?


Hello
To tune the TV either with cable of trerrestrial antena, plug in the cable or terrestrial antena cable to the antenna socket of the TV and do the following.

To preset a channel or to change a preset channel, follow the procedure below.

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel) ? or ? button to point to "CHANNEL SET".

Then, press the VOL(ume) ? button.

4) Press the CH(annel) ? or ? button to point to "AUTO PRESET CH".

Then, press the VOL(ume) ? button.

The tuner scans and memorizes all active channels in your area.

? The TV distinguishes between standard TV channels and cable (CATV)

channels.

? When AUTO PRESET CH action is completed, the lowest memorized

channel reappears on the screen.

? When you press the CH(annel) ? or ? button after selecting "AUTO PRESET CH",

the tuner will stop at the memorized channels only.

? The TV may recognize TV channels to be CATV channels by receiving conditions. In this case,

try AUTO PRESET CH action again in the fine receiving conditions.

? When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS"
will appear on the display after the completion of channel scanning.
OK.

Dec 16, 2010 | Emerson EWF2004 20" TV

Not finding what you are looking for?
Teac T-H500 2 Channels Tuner Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4990 Answers

yadayada
yadayada

Level 3 Expert

74418 Answers

The Knight
The Knight

Level 3 Expert

73474 Answers

Are you a Teac Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...