Cannot locate Playback mode for Polaroid i1035 Didital Camera
I have located the mode button, as instructeed in manual, pressed this button to callup the arrow in a box shown as the playback mode. I first get a black screen that says no image , push again and get the video icon. No luck finding Playback mode.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have the manual for this camera turn to page 15. This tells you how to switch between Shooting Mode and Playback Mode. This is achieved simply by pressing the DISP button. This button is located below and to the left of the FUNC/SET button. Pressing DISP repeatedly toggles between Shooting Mode and Playback Mode. I would suggest you try these steps with your Mode Switch in both positions alternately.
It is possible that there is a small amount of corrosion on the contacts in the camera. Use the eraser end of a common pencil to clean these contacts. Also, make sure you are using the correct batteries. It shows here that you have the polaroid i830. this camera uses two AA batteries:
Open the battery door, located on the underside of the camera (use your thumb to slide the door outwards). Install the two AA batteries into the battery bay. Install the SD card into the slot located next to the battery bay. Close the battery door.
Step2Press the power button located on top of the camera. Locate the "Playback" button on the rear of the camera, under the "W" button; this button switches the camera between "Capture" and "Playback" modes. Set the camera to "Capture" mode.
Step3Press the button on the bottom right of the rear of the camera to open the mode selection window. Use the navigation buttons to select "Still Image" mode. Press the button labeled "Set Disp" to confirm your selection.
same thing happened to me too! lol. However after you press the menu button and click "default setting", go set your date and time again. Then turn the camera off. Turn it back on and you will find that the date/time is correct!