My ps2 waz workin perfect the other and when i go turn it on it takes me to the main screen. i then check the disk to see if it was scratch and i t wasnt then i closed the cover and it made w aierd noise.now th disk dosent spin.Help?
I suggest checking on another disk, if not disk works then it is your console. Most likely if it is your console you will need to take it into a tech guy to get some pieces replaced. This might cost more then the console however.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please check information in the TV screen. Is it unknown disk or just nothing.
Unknown disk is indicate your lens is unable to read the disk. It could be because bad disc, dirty lens or defective lens.
If nothing information in your screen, probably the problem is in your small motor to spin the disk.
So please check the root cause so you can locate the problem precisely before take repair / replacement.
Check to see if the top lid is closed correctly. Probably one of the
small locks on front of it has broken off and the Playstation 2 wont
spin the disc. Check to see if they are intact as well. If this is not
the problem then you should probably call the PlayStation 2 Support
Line, or just call up Sony.
This might be due to the over usage of the reading lense without cleaning.so i request u to open the console.you would see another cover covering the lense.open tat too.with the help of tissue just try to wipe out the lense n jus turn on the ps2 without closing anythin to jus check whether everythin is workin..if the dvd works,then arrange back or put back everythin back to it's position..hope this would work...else try calling a service engineer.
please rate this solution if it meets ur needs else choose fixya.Thank you...
i had this same problem countless times, the problem is the laser what you have to do is open it up get a bud and some ethanol(becareful some ethanols are made oily to prevent child consumption avid these one) then gently wipe the lens and clean out the rest of the console with a hairdryer and VOILA