Document on computer will not print on my HPPhotosmartC5200 All-in-One printer.

You'll need to reboot your computer. You'll also need to turn off your printer (on/off switch or unplug the power cable).

Then plug everything back in and bring your computer back up. Most of the time this will solve the problem.

If the printer won't print just one Word document, then the document got corrupted just a tiny bit. Rebooting the computer won't solve that problem. However, if you can get Word to say that it 'has a problem and needs to close' (while the bad document is open), then it will recover and repair the document. Reopen Word, and you will see a list of recovered documents. Click on your problem document and open it. The recovered document should be able to print. Save that recovered document as a copy of the original one and print it.

I've had both problems, and these solutions worked for me.

Brother Printer Support

A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.

If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print/scan again.

If you are putting a document into the printer and want to make a copy of it, press the key that says "copy" on the printers keyboard. Then choose the number of copies you want to make and press the "ok" or "enter" key on the keyboard of the printer.

If the document you wish to make a copy of is located in your computer and you dont have a copy of it to place in your printer - then you need to print the document. Not copy the document. Copy means make another one. You can't copy something that you dont have in your hands. Understand? To print a document that you dont have in your hands, find it on your computer. When you find the document you want to print on the computer, click on "file" in the upper left side corner of your computer screen and slide down to "print" and click on it. Then click on "ok" on the next screen to start printing your document.

If there is no "file" command in the upper left corner of your computer screen when you have the document that you want to print open on the computer - try right clicking with the button on the right side of your mouse in the center of the document and find the "print" command on the drop down list and click on it. Then click on "ok" on the next screen and this will start the printing of your document.

Hope this helps? Good luck!

o.k. I believe I can help you with this.

The mysterious printing document huh? many people run into this problem some point in the printing experiences.

This is what I think may be your problem.

You have backed up print jobs in your print cue. Things that you or someone using your computer told your computer to print but never printed out .. maybe your printer was out of paper? maybe you turned off your computer or it lost power before a print job was complete?

THIS IS WHAT YOU DO.

Look to the right bottom corner of your computer monitor. This is your system try. look of the printer icon. Click on it. now
this should pull open a printer task menu.

right click anywhere in the box and cancel all print jobs.

Now resume trying to print your document. It should print out for you.

If you still have problems turn off your printer and computer.

turn back on your printer and then power back on your computer and try printing again. This last step is just a way of refreshing everything in case changes did not take place.

good luck if this was of assistance pleas take the time to leave a kind testimonial. :)

You have to erase it from it's memory. If you have already tried to cancel it via your pc and it didn't work, try this: turn off the printer. Entirely, from the wall socket. Turn off your computer. Then turn them on again. Both the computer and your printer should erase the document from their memory, so it will stop the printing.

Instead of pressing the start button to print, you need to press the small ON/OFF button. The start button works to copy/scan. But to print, you will need to turn the printer on first. Once the printer is on, the computer should recognize it fine and allow you to print from your applications.

Replace the print driver on the computer. You can download the latest print driver from www.hp.com. Goto Software/Driver dwnld section.

Try downloading and installing the latest drivers for you printer from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=71896&lc=en&cc=us&dlc=en&lang=en&cc=us

Regardless of the application, open the document, click File, then click Print and select the printer. If the printer is not listed it needs to be installed on the computer.

I used to have that same problem what i suggest doing is restarting not only the printer but your computer aswell. That seemed to solve the problem for me