Question about Panasonic Panafax UF-890 Plain Paper Laser Fax
Our Panafax 890 has the message File System Setup displayed several times a week. We have to turn off the machine to clear it. The machine will not pickup any calls when this message is displayed. What could be the cause of this?
Sounds like either bad memory or bad main board
what i would like you to do is turn the power off , open the top you can see if there is a falsh memory card in there. if it is take it out, if there is none im sorry to say your main board is gone
Posted on Dec 12, 2008
It sounds like you have a main circuit board failure.
However, try this.
Open the toner door and remove the cartridge
make sure the machine is turned ON
Unplug the power cord
open up the document feeder by pulling straight up
hold down the pointed black switch
closest to the small glass while plugging the power cord back in until you hear a BEEP, close the document feeder.
scroll down to SHIPMENT SET
The machine will REBOOT in 2 minutes.
Posted on Dec 03, 2008
Tips for a great answer:
Jun 04, 2010 | Panasonic Panafax UF-890 Plain Paper Laser...
Nov 09, 2009 | Panasonic Panafax UF-550 Plain Paper Laser...
Jul 17, 2009 | Panasonic Panafax UF-890 Plain Paper Laser...
Mar 04, 2009 | Panasonic Panafax UF-890 Plain Paper Laser...
Jan 29, 2009 | Panasonic Panafax UF-550 Plain Paper Laser...
Dec 03, 2008 | Panasonic Panafax UF-595 Plain Paper Laser...
Sep 26, 2008 | Panasonic Panafax UF-585 Plain Paper Laser...
Sep 08, 2008 | Panasonic PanaFax UF-8000 Laser Fax
71 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: