Question about AudioBahn ALD28X 2-Channel High Performance Line Driver Car Audio Amplifier

1 Answer

Pls i need device drivers for eurobook model 8375. i need driver for multimedia controller,network controller,pci simple communications controller

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 157 Answers

Hello ,

This Driver Detective site might be able to help:

If this solution is helpful please click a thumbs-up rating below.

Have a great day,

Posted on Feb 10, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Power to the amp but the indicator light does not turn on, I don't have the remote is that why the amp won't turn on?

Yes, you will need to connect the remote wire to the remote output wire of the stereo head unit, the power antenna wire of the head unit, or an accessory power wire (one that only has power when the ignition key is on). You could also run a direct power wire to the remote on the amp, and install a simple on/off switch of your choosing that can be accessed at the drivers seat.

Jan 20, 2014 | Car Amplifiers

2 Answers

Ecoin hack ecion

i need 100.000.000 ecoin plzzzzzzzzz

i need 100.000.000 ecoin

Aug 21, 2013 | Crossfire XP1000D Car Amp

1 Answer


pls check burnt resistors, if ceramic it's value is .25 0hms 5 watts, if big carbon film resistor it's value is 10 ohms 3 watts. check also power transistors A1941 & C5198. also check driver transistor A940 & C2073

Jan 06, 2013 | Car Amplifiers

1 Answer

I reprogram my pc and the driver of my webcam lost how can i use my webcam without a driver

you can't. you will need to get the drive from the manufactures website. a simple google search will find what you need. good luck

Jan 26, 2010 | Philips GEMINI XG-2001 Fan...

1 Answer

No sound card installed Xp automatically

you need to find what kind of soundcard you have and download then install the drivers for that sound card, open up the case if you have to and try to read what brand the card is and what model it is, then go online and get the drivers, that should fix your problem

Jun 15, 2009 | AudioBahn ALD28X 2-Channel High...

1 Answer

I need a remote control bass knob and cable for a Legacy LA590 2

Most of the remote bass control knobs & connectors are the same, regardless of manufacturer. Granted there are different styles & connectors used, but just find one that's compatible with the amplifier you have. You don't state what amp you have (at least I don't see it in desc.) Send me some info & I'll get back to you tonight. Bruce McGowan

Mar 23, 2009 | Car Amplifiers

2 Answers

Wireless card of DELL Inspiron 1525

Hi there,

you need to update the firmware for the wireless drivers from dell.

but before you do this, go to controll panel, then preformance, then system tools, then on the left go to device manager, then find the wireless card under network, then left click it and press enable, if not press disable then enable again

Feb 14, 2009 | DLS A6 Car Audio Amplifier

1 Answer

Jl 500/1 no sound

If all of your connections are correct you may have sustained damage to the driver amplifier that controls the subwoofer. If you have electronics experience and can get the schematic, you may want to trace the audio signal to see where it drops off. it is my guess that it will either a one of the pre-driver transistors, or at the main power driver MOSFET devices. In any event they will need replacing if they are bad. I don't they are bad because the light does not remain red so it might be on of the pre-driver transistors.

Sep 03, 2007 | Verge VGA300M Car Audio Amplifier

1 Answer

My amp quit working

ok I thought I anwered this one but first thing to try is disconnect all your speakers and see if the light goes out if it doesnt then your gonna need a schematic and a working know how on solid state amplifiers. first check al the outputs for the speakers for dc If theres dc on an output then that output device is shorted or leaky. Ive have open drivers as well as current control transistors leaky or shorted to that made the protection come on.. Good Luck

Apr 07, 2006 | AudioBahn A6004T Car Audio Amplifier

Not finding what you are looking for?
AudioBahn ALD28X 2-Channel High Performance Line Driver Car Audio Amplifier Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top AudioBahn Car Amplifiers Experts

matthew walsh

Level 1 Expert

69 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an AudioBahn Car Amplifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides