Question about Insignia Bluetooth Wireless Headphones with USB Bluetooth Adapter

1 Answer

I am trying to setup my bluetooth headphones and they did not come with instructions. I just need to know how to put them into discovery mode.

Posted by on

  • Chris Fourie May 11, 2010

    Does it have a microphone on it? (This is important because if it doesn't then its just a matter of getting the two devices to turn on and then shhould do the rest

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I bought one myself, I have a Vista OS, non-integrated bluetooth laptop.. I had to pop in the USB dongle for capabilities....Still cant get the Mic to work though...so if anyone knows anything on that....I went to HP live chat session too.

BUT HERES THE MODES YOU MAY NEED TO PUT IT IN...
Searchable/Discovery- Hold down the power button about 6-7 secs and it will sound a few short low beeps and flash between Red and Blue, then search 8)
Erase Pairing Profiles- Press and hold the Track forward/track backward Button together until it flashes purple.
Hardware reset- if headset is screwy, froze up, LED display is incorrect...Plug in headset, and hold down bothh Volume buttons, this will power it down and reset its state of confusion, lol
Passkey is always '0000' by default
2-short Hi beeps....Connected
2- short low beeps....pairing mode also
1 long Hi beep.....Power On/Off
1 long low beep....lost Connection

Hope that helps... merry christmas

Posted on Dec 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I buy a new Plantronics Backbeat 903, but right now it's unrecognizable by any movile, can you give some hints on how to fix that problem. I try with an LG P500 and Nokia 6110, no answer...


Delete the device from the phone, then re-pair the headphones with the phone. If you just turn on the headphones, the device cannot connect because the headphones store the information that you already deleted it on the phone. To pair again with the other device (like a computer, phone, etc) you need to turn off the headphones, then turn on the headphones but press the power/pair button and hold until the led flashes red and blue (like 10 sec after the led turn only blue) to put it in discovery mode. Then turn on your phone and follow the instructions for finding (discovering) your bluetooth headset.

Good luck from Headsets Direct!

May 06, 2011 | Plantronics Backbeat 903 Bluetooth...

1 Answer

How do i sync my ht820 to my samsung flip phone, phone says place bluetooth device in discovery mode and I dont know how to do that\


To connect your headset to your phone, press and hold the "M" button on the left side of the headset for 6 seconds until the indicator light turns on and remains steadily lit.
Next, put your phone into pairing mode by going into your Bluetooth settings and searching for a device. Once your phone has found your headset, you can sync them together.

May 03, 2011 | Motorola Mobility HT820/ 98689 Bluetooth...

1 Answer

Need to reset plantronics voyager pro heatset it pair with wrong phone and i cannot reset it or know how


to reset or pair your bluetooth device you need to put the device into discovery mode.To do this most manufactures use the power button,by holding the power button down for 8 to 10 seconds while turning the device on it should put it into discovery mode.Usually a light will remain on then you can find or search from your phone for new device.Once your phone has discovered the device it will ask for a pin\pairing code .Once again most manufactures use a 4 digit pin\pairing code they are as follows,0000,1234,9999, or 1111,try them in this order one will work. Hope this helps

Mar 22, 2011 | Plantronics Discovery 925 Bluetooth...

2 Answers

How do i make my backbeat 903 discoverable


Most manufactures of blue tooth devices use the power button to turn the discovery mode on,by holding the power button down for 6 to 10 seconds when turning on your blue tooth device a solid light should come on,that means your blue tooth is in discovery mode,then what ever device you are connecting it to has to have the blue tooth power turned on,then there should be a add new or search for devices,after thatyou will need a pin pairing code,Most manufactures use a factory 4 digit pin pairing code they are as follow,0000.1234,1111 or 9999 i hope this helps

Feb 22, 2011 | Plantronics Backbeat 903 Bluetooth...

1 Answer

Does the Plantronics 903 compatible with iPhone 4. How do i pair it with my iPhone 4


On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode (usually you have to hold the power button for 7-10 seconds).

Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.

Dec 17, 2010 | Plantronics Backbeat 903 Bluetooth...

1 Answer

Plantronics 925 Discovery won't connect with Droid 2


  • Turn on Bluetooth within your phone - Consult phone instruction booklet
  • Put phone into pairing mode - Consult phone instruction booklet
  • Put headset into pairing mode - With headset off, press and hold Call Control Button
    until the headset begins to flash red and blue.
  • Select "Add new device" on your phone.
  • Select the Plantronics headset when prompted. Enter "0000" as passcode.
  • Your 925 headset will now have a continuous blue light blinking.
  • Choose "Yes" if your phones asks if you want to bond to the 925 headset.
  • Your phone is now paired with the Plantronics 925 headset and ready for use.
  • Please leave me a good rating!

    Sep 04, 2010 | Plantronics Discovery 925 Bluetooth...

    1 Answer

    How do you put the device into discovery mode


    Before you use your Jabra BT160, you need to pair it with your mobile phone. 1. Put the headsetin pairing2 mode Make sure that the headset is on. Press the answer/endbutton and press the volume up (+) button at the same time, until asolid blue light comes on. 2. Set your Bluetooth phoneto ?discover? the Jabra BT160 Follow your phone?s instruction guide.This usually involves going to a ?setup,? ?connect? or ?Bluetooth? menuon your phone and selecting the option to ?discover? or ?add? aBluetooth device 3. Your phone will find the Jabra BT160 Your phonethen asks if you want to pair with it. Accept by pressing ?Yes? or ?OK?on the phone and confirm with the passkey or PIN3 = 0000 (4 zeros).Your phone will confirm when pairing is complete. In case ofunsuccessful pairing, repeat steps 1 to 3.

    USER GUIDE

    Jan 03, 2010 | Jabra COMMUNICATIONS BT160 Bluetooth...

    1 Answer

    My blackberry cannot find my bluetooth device


    put it in discovey mode and ur blackberry in discovery mode so ur bluetooth can alsofind ur phone. should work now,

    Jul 15, 2009 | Insignia Bluetooth Wireless Headphones...

    2 Answers

    How do you pair your Insignia Headphones/ Headset with a PS3? It is called an insignia NS-BTHDP/NS-BTHDST. In the instructions it only talks about pairing it with a computer. Can someone help me?


    Go to Accessory Settings on your PS3.Then go to mange bluetooth devices and hit register new device. while doing this take your headset and put it in discovery mode. You do this by holding the power button and the it alternates between blue and red lights.It should work after that.

    To test it go to audio device settings and see if it shows up.

    Mar 26, 2009 | Insignia Bluetooth Wireless Headphones...

    1 Answer

    I need to know how to pair my plantronics discovery 925 - I have no user instructions


    set your phone to discovery mode. press and hold the button inside of the diamond until it flashes blue and red. once you do that, your phone should see it. Pair it to your phone by putting in code. 0000.

    Happy Calling :)

    Dec 19, 2008 | Plantronics Discovery 925 Bluetooth...

    Not finding what you are looking for?
    Insignia Bluetooth Wireless Headphones with USB Bluetooth Adapter Logo

    265 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Insignia Headsets Experts

    tk007

    Level 1 Expert

    23 Answers

    Sudeep Chatterjee
    Sudeep Chatterjee

    Level 3 Expert

    3267 Answers

    Nataly Roberts
    Nataly Roberts

    Level 2 Expert

    30 Answers

    Are you an Insignia Headset Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...