Question about Samsung 793S 17" CRT Monitor

3 Answers

I want defalt settings of samsung syncmaster 793s 2004 model monitor

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

The default resulution is 1024 x 768, you can keep the Screen Refresh list at 75 Mhz

If you have been at "Out of Range" then you need to reboot and press F8 before windows load up, then choose VGA Mode. When windows finished loading you can fix the resolution again as you like. Hope this fix your problem

Best Regard!

Posted on Dec 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What is a setting of buttons

Posted on Apr 25, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Dear Sir,
I am having Samsung SyncMaster 793S, probulem is picture size reduced to 14" size with maximum adjustment with side control knobs. To restore the full size picture solution & servicing hits please. If you provide me circuit, please send to my mail ID: kodurumailin@myway.com.
Thanks

Posted on Sep 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

About display settings


try holding all the buttons on the monitor (except the power button) for like 5 seconds. Manufacturers usually put that as a reset feature on monitors. If it doesnt work, consult the user manual.

Dec 04, 2011 | Computer Monitors

1 Answer

Samsung SyncMaster 793s monitor


Kindly give me More detail for your problam , Did you find any kind of message on display Or nothing at all ?


Shahzad Rashid ( Sunny - IT )
Cell - +971 555 2008 74.

Mar 24, 2011 | Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

No width for samsung syncmaster 793s crt monitor why


Click Display in Control Panel "Monitor" alter specs.!

Nov 02, 2009 | Philips 105S51 15" CRT Monitor

1 Answer

Monitor screen went blank after changing resolution


Try unplugging the monitor and then restart, and then go back to default settings.

Jan 30, 2009 | Samsung 793S 17" CRT Monitor

1 Answer

A black flickering line about 5" from the bottom on my samsung syncmaster 793s 17" CRT Monitor


Hi rkarthea,

Well to narrow down the problem I would suggest first that you try to disconnect the monitor from your APC Back-UPS and just plug it directly to the wall outlet, UPS or surge protectors may cause interference at times with some electronic devices. Then if it's still here, I would recommend that you try to degauss the monitor, all CRT monitors have this option in the OSD. You should also check if there is any magnetic device near the monitor, like a speaker or phone that can cause this. If another PC is available can you try it there also, see if the problem is seen on another PC.

Finally, run the monitor self-test, to do this just leave the monitor plugged into the power outlet and disconnet the video cable, and you'll see it. If the problem is still there then most likely the monitor will have to be checked in a service center or be replaced eventually, since this would already be a hardware problem. Especially since you said the problem is apparent even in the OSD.

Hope this helps!

Peace! :)

Oct 23, 2008 | Samsung 793S 17" CRT Monitor

1 Answer

Increase or decrease of contrast


Rammohannnnn........wake up!!!

Try the same processed again like last time go to contrast, this time press the + buttons to increased the contrast to the desired setting. Have a nice day!

Sep 28, 2008 | Samsung Computer Monitors

1 Answer

Monitor problem


1240/1024 and 75hz refresh rate

May 09, 2008 | Samsung 793S 17" CRT Monitor

1 Answer

Monitor settings


You can increase brightness by eht .Move button of screen that is placed on eht
Hope this solution works

May 06, 2008 | Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

Focus on monitor


Try replacing the filter capacitors on the video circuit.

Apr 28, 2008 | Samsung SyncMaster 753S 17" CRT Monitor

Not finding what you are looking for?
Samsung 793S 17" CRT Monitor Logo

1,431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computer Monitors Experts

Rugeshan Lanka
Rugeshan Lanka

Level 1 Expert

15 Answers

Pieter Vleeshouwers

Level 3 Expert

1420 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Samsung Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...