Question about Combination Televisions

1 Answer

Is there anyway to program the remote with my cable company to turn my 22" Sylvania HD TV on and off instead of having to use both remote controls

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

When programing the remot control
program under vcr not tv

Posted on Dec 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can't program my remote to my Sylvania tv! I've tried every code they had for it. It's a 13 inch tv/dvd combo and its a comcast remote. Please help!


Although you didn't explain what brand of universal remote this was for, all universe remotes have a code search option for this situation. Check the manual for your specific remote control for more details.
Often manufacturers of multiple brands will use the same infrared (IR) codes for all of their brands. For example, Panasonic and Quasar share the same codes as their parent company is Matsushita Industries. In your case Funai is the parent company of Sylvania and the parent company of Magnavox so you might want to try the Magnavox codes before doing a code search. As Funai also manufactures televisions for Toshiba and Sharp, so try those codes as well.

Apr 23, 2011 | Sylvania 6513DE 13 in. TV/DVD Combo

1 Answer

I need the three digit code for the ge universal remote control for sylvania 6513DD please.


Hi, You can programme your remote by below method
Manual code entry
1.Turn on your television or other electronic component that you want to program the remote control for.
2.Hold down the "Code Search" or "Setup" button until the LED indicator light turns on. 3.Hit the button for the component that you are programming (TV,DVD VCR, etc.). The LED light should flicker and stay on.
4.Enter the 3-digit or 4-digit code that corresponds to the TV or device that you're operating.The LED light should go off if the code is valid, but will flash if it is not. Try other codes you have.
5.Try turning the television or other programmed component off to ensure that the remote works properly, once the light has gone off.

Auto configuration

1.Turn on your television or other electronic component that you want to program the remote control for.
2.Hold down the "Code Search" or "Setup" button until the LED indicator light turns on. 3.Hit the button for the component that you are programming (TV, DVD, VCR, etc.). The LED light should flicker and stay on.
4. Press and release the "Power" until the television or other component turns off while waiting at least 2 seconds between each press.
5.Press "Enter" or "Save" once the remote has effectively turned the power off. The LED light will shut off and the remote will now operate the device.

You can get your codes from below website
http://www.jascoproducts.com/support/universal-remote-codes.asp
Thank You

Nov 06, 2010 | Sylvania 6513DD 13 in. TV/DVD Combo

1 Answer

Lost remote to sylvania combo tv how can i change the channel manually?


If tv is programmed you should be able to change channels at the tv front control panel. Also, you can buy a univeral remote and program it to your television.

Apr 23, 2009 | Sylvania 6720FDD 20 in. TV/VCR/DVD Combo

1 Answer

Sylvania 6719DC + E Circuit 6 in 1 Remote Control


I bought this at a Dollar Store and it works great.

1) Turn TV on. Do not worry about what channel.

2) Press and release TV1 button on remote. Depending on what unit your trying to sync.

3) Press and hold SET and ON buttons together for about three seconds until light begins to flash.

4) Release buttons, light will continue to flash and search.

5) Be prepared to immediatly press SET button when Television Set turns off. Be patient this may take a few minutes.

I wasn't able to find information on this. Just got lucky. Hope this information helps. Good Luck!

Nov 09, 2008 | Sylvania 6719DC 19 in. TV/VCR/DVD Combo

4 Answers

How to connect a Time warner cable remote to the tv


I made mine work by using programing the vcr button as opposed to the tv.

Aug 21, 2008 | Sylvania 6520FDE 20 in. TV/DVD Combo

1 Answer

Sylvania 6727fde universal remote code


Hello goyitos,

I would contact the TV manufacture and then see if they can send you a replacement remote. They will usually do this for the cost of the remote with shipping and handling.

I hope this helps
Thank you,
Shuttle83

Mar 23, 2008 | Sylvania 6727FDE 27 in. TV/VCR/DVD Combo

3 Answers

Sylvania tv model # ssc719c


I had the same problem programming my directv remote to recognize the ssc719c. What finally worked was programming AV1 (not 'TV') with the sylvania DVD code 20821. This allowed me to turn the tv on and off and change tv channels, but wouldn't allow me to mute or change the volume. To fix this, (at least in my case) you have to program your remote to recognize the volume and mute buttons in the AV1 slide setting. I assume other (non directv) remotes similarly disable the volume and mute buttons when the remote is not in satellite or tv mode. Anyway, here are the instructions that activated the volume & mute buttons on my remote: "Depending on how you set up your remote, the VOL and
MUTE may control the volume only on your TV, regardless
of the position of the MODE switch. This remote can be set
up so that the VOL and MUTE keys work only with the
component selected by the MODE switch. To enable this
feature, perform the following steps:
1. Press and hold the MUTE and SELECT keys until the
green light under the DIRECTV position flashes twice,
then release both keys.
2. Using the number keys, enter 9-9-3. (The green light
will flash twice after the 3.)
3. Press and release the VOL+ key. (The green light
flashes 4 times.)
Now the VOL and MUTE keys will work only for the
component selected by the MODE switch position."

To sum up: if you find a code for your remote that will turn your tv on and off, but doesn't seem to do much of anything else, it's probably the right code; your remote is probably set up not to recognize volume or mute inputs in AV1 or AV2. You change that using a remote-specific code that's probably found somewhere on the remote maker's website.

Jan 31, 2008 | Sylvania SSC719C 19 in. TV/VCR/DVD Combo

1 Answer

Help


The exact OEM replacement remote for that unit is $30.00 plus shipping - just call 1-800-736-6837 and give them the model number of your TV... Not having the remote there is no way into the menu and thus no way to auto program it... Get a remote, access the menu and then hook-up cable and do an auto program.. Good Luck Bill

Jun 11, 2007 | Sylvania 6319CC 19 in. TV/VCR Combo

Not finding what you are looking for?
Combination Televisions Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Combination Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...