Question about Kyocera Mita KM-2550 All-In-One Laser Printer

1 Answer

KM 2550 SCANNER SETUP ON NETWORK COMPUTER

We have 6 compuuters on the network (with Server) and trying to install scanner utility on a new computer 4 other computers have this scanner installed and working. I must be missing something.

Posted by on

  • 2 more comments 
  • mazmet1 Dec 03, 2008

    The OS is XP Professional and no the Printer software is not on the server but on each individual computer station.



    Thanks

  • mazmet1 Dec 04, 2008

    Yes I have the Disk with the Drivers and have installed what I believe is the correct driver but still no go.

  • mazmet1 Dec 04, 2008

    All computers on network are running XP Professional

  • Frank
    Frank May 11, 2010

    what is the operating system on computer 4?

    did you have the printer software on the server?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

Do you have the CD or the driver for the scanner? if so, use the CD to install it. if not, go to the follwoing link and download the driver
http://usa.kyoceramita.com/americas/jsp/Kyocera/download_center.jsp?pid=18154&pcat=10569&rcid=10009&rscid=10007&x=44&y=13
I assume the other 5 computers are not running Wndows XP or don't have the same operating system??

post back if you still having problem.

please don't rate the answer till we finish the Q&A.

Thanks

Posted on Dec 03, 2008

  • Frank
    Frank Dec 04, 2008

    do you get any message when it fail?

    where is the scanner is connected, using CAT-5 cable or on one of the computer?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you install new e-mail addresses on scanner for kyocera km 2550


Open the browser on your computer, type the Ip address of the scanner on the address bar, the page of the scanner will open, under scan to email destination, you can add or remove accounts.

Dec 01, 2011 | Kyocera Mita KM-2550 All-In-One Laser...

Tip

I get error 'Unable to find destination PC-Check the PC' on Kyocera Mita


Hi.

This error means that there is a communication problem between the printer and the computer that is receiving scanned file. The error is usually prompted on network installed printers.

Check to ensure that the Scanner File Utility software is running and the computer is able to receive data.
Try restarting the computer and printer. Disconnect both units from power supply for five minutes before restarting.
Check if you have firewall or security software active on computer that can block communication from scanner. Ensure that the scanner utility is listedas an exception on firewall settings, if the application is not present, then you need to add it to allowed applications list.
Ensure that you have granted Scanner Utility access to system resources if asked.
Reinstall printer software and driver on PC. This can be done either using the disk provided with the printer, or using the download from Mita website.
Test the computer network cable. If cable is worn it can cause communication errors. This problem is usually occurring on LAN (network) printer installation. If using local installation via USB, then test using a different USB cable. If USB cable is damaged or too long (over 10 m.) , then you may get the error stated on local installation.

The most common reason for this problem is firewall settings or network problems. Network problems may be difficult to troubleshoot. Remember also that there is a built in firewall in the router resident software. If the router is set to block inbound communication from printer to computer, or if printer and computer are in two different IP ranges (eg. 192.168.1.xxx and 192.168.2.xxx), then you may get communication between computer and printer blocked by router firewall.

Here a setup manual (click to download), also ensure that you have performed scanner setup correctly.

Here also Kyocera Mita download driver page:Kyocera's managed print services .

Regards.

on Mar 31, 2010 | Kyocera Mita KM-3035 All-In-One Laser...

1 Answer

How do I install driver for Kyocera CS 5035 on MAC


Kyocera and Copystar models are the same just replace KM with CS.

The following instructions should help you. TO download the current driver use this link to th emanufacture website; http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?rid=18657.

Kyocera Printer Drivers and Mac OS® X 10.5 Leopard FAQ:
Is the installation for Mac OS X 10.5 the same as for Mac OS X 10.4 and earlier? Mac OS X 10.5 introduced a new printing architecture that requires changes to the installer and installation process. For this reason, Mac OS X 10.5 requires a new printer driver installer.

I cannot see my Kyocera AppleTalk® printer. How can I make it visible to OS X 10.5? AppleTalk is disabled by default in Mac OS X 10.5. Enable AppleTalk to discover your Kyocera printer.If you use the Kyocera installer, a message will appear, asking you to enable AppleTalk. Click Yes to continue the installation.

I cannot find Printer Setup Utility on Mac OS X 10.5. Is it still supported? Apple has removed Printer Setup Utility from Mac OS X 10.5. To install a printer, open System Preferences and click Print & Fax.

When I manually install a printer, multiple PPD files are listed for the same Kyocera model. Which should I choose? When manually installing a printer or changing a PPD for a installed printer, both Linux and Mac OS X PPDs are listed for some older Kyocera models due to a change in PPD handling in Mac OS X 10.5. Linux PPDs can be identified by the word Gutenprint in the PPD filenames.

Supported Multifunction Printers: KM-1650, KM-1815, KM-1820, KM-2050 ,KM-2530 ,KM-2550, KM-3035, KM-3050, KM-3530, KM-4030, KM-4035, KM-4050, KM-4530, KM-5035, KM-5050, KM-5530, KM-6030, KM-6330, KM-7530, KM-8030, KM-C830, KM-C830D, KM-C850, KM-C850D, KM-C2520, KMC2525E, KM-C2630, KM-C3225, KM-C3225E, KM-C3232, KM-C3232E, KM-C4008, KM-C4035E, CS-1650, CS-1815, CS-1820, CS-2050,CS-C2525E, CS-2550, CS-6030, or newer. Supported Printers: FS-820, FS-920, FS-1018MFP, FS-1020D, FS-1030, FS-1100, FS-1118MFP, FS-1300D, FS-1800, FS-1800+, FS-1900, FS-1920, FS-3800, FS-3820N, FS-3830N, FS-6020, FS-6026, FS-9100DN, FS-9120DN, FS-9500DN, FS-9520DN, FS-C5016N, FS-C5020N, FS-C5030N, FS-C8008N, FS-C8026N, FS-C8100DN, or newer.

I hope this is helpful,
Shawn

Mar 08, 2011 | Kyocera Copystar CS-5035 Copier

1 Answer

My Kyocera KM-1650 has been relocated and now the scanner won't work but it stills prints on the network.


u need a software called scanner utility to be able to scan to a folder on the pc u connected to.Unless u scanning to e mail then ur new server has different network details

Nov 25, 2010 | Kyocera Mita KM-1650 All-In-One Printer

2 Answers

How to turn on wifi


Configuring the optional internal wireless print server
If you purchased the optional internal wireless print server after your printer was already set up, follow these steps:
1 Install the internal wireless print server into the printer. For more information, see "Installing an optional internal
wireless print server" in the "Setting up the printer" chapter.
2 Click Start Programs or All Programs Lexmark 3500-4500 Series.
3 Click Wireless Setup.
4 Click Start.
5 Follow the instructions on the computer screen.
6 Click Finish to complete the installation.


Also here is the link to the setup guide and user manual
click here

configuring the wireless is in the setup guide

Oct 18, 2010 | Lexmark X3550 All-In-One Printer

1 Answer

I want add a KM-2550 as a printer on an XP machine. I know what the host name of the KM-2550 is. The KM-2550 is definitely on the network because I pinged it from the XP. How do I find the name of the...


u can come to know from the server
where its physically installed
goto printers and faxes
then oen printer properties
and there is a tab named shared
see the name there
and write it
and then
u can add to the other macine
and can install

Jun 18, 2010 | Kyocera Mita KM-2550 All-In-One Laser...

2 Answers

I am trying to set up newtwork scanning on our Kyocera KM 2550 multifunction machine and I can't find in the manual how to do it?


cool... ok here is what you do goto usa.kyoceramita.com then downloads... then where it says choose product... choose legacy copier then choose product then... where it says select subcategories... select manuals you need the scan system f operations guides both the setup and functions editions...

Dec 22, 2009 | Kyocera Mita KM-2550 All-In-One Laser...

2 Answers

I have a Kyocera CS 1820 copier, scanner, fax machine and I can't figure out how to geet it to scan to pc. I have installed the drivers from the kyocera site and still no luck......


Make sure that you downloaded the correct drivers....Etc... (x64) vs (x86) also make sure you have the proper script # driver ... Etc... #5.1 vs #6. You will want to completely uninstall all the old drivers, shut down your computer --- do not just reboot, reinstall all the new drivers,and after your computer is done rebooting – shut it down and restart. Also make sure that you and the designated file set up on the computer, it needs to know where to scan the document and send it to.

Dec 23, 2008 | Kyocera Copystar CS-1820 Black and White...

4 Answers

KM-3035 scanning issues


the 30/40/5035 series machines have two network cards in them. One for printing and one for scanning. and they have separate IP numbers also. make sure you have scanfile utility running on your pc or wherever you are sending the files and the folder set up in the utility. then set it up on the scanner network card.. Not the printer.

Oct 15, 2007 | Kyocera Mita KM-3035 All-In-One Laser...

Not finding what you are looking for?
Kyocera Mita KM-2550 All-In-One Laser Printer Logo

7,026 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Printers & Copiers Experts

NewYork kyocera HP...

Level 3 Expert

513 Answers

Henry Gertcher

Level 2 Expert

46 Answers

Kevin Cole

Level 1 Expert

45 Answers

Are you a Kyocera Mita Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...