Question about NEC VT465 Multimedia Projector

2 Answers

Nec projector not coming on

I have a Nec projector that doesn't come on, but its status lamp - blinks red 3 times repeatedly. Do you know what it is telling us?

Posted by on

  • JillARuss Dec 04, 2008

    Our NEC VT465 projector will not come on, no fan, but status light blinks repeadley.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Yep, there is a switch that enguages the lapm cover is opened, put the lamp cover back in place and the status blinking red light will stop, and projector will be ready.

Posted on Aug 07, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

*Wilshire Computer Services**
11755 Wilshire Blvd. #80
Los Angeles, CA 90025
Tel: (310) 478-3055
FixItToday@gmail.com


*
*Our technicians have years of experience in repairing all types of
computer equipment and electronics including, but not limited to:
Laptops: Dell, Sony, Apple, HP/Compaq, Acer, Toshiba, and Gateway. We
repair loose ac/dc jacks, video problems, cracked lcds, virus/spyware
removal, data recovery, password removal on all operating systems.
Cell Phones: iPhone, Blackberry (battery and LCD replacement + more)
Portable devices: GPS systems, projectors, digital cameras, and camcorders.
Gaming systems: Xbox, PSP, Playstation 3, and Nintendo Wii. We repair the 3
rings of death, disc not reading, not turning on, etc.
Other: TVs, DJ mixers, printers, copiers, and fax machines.

We stock all original OEM branded laptop AC power adapters, batteries, and
LCDs. We also stock Original OEM Branded toners and ink cartridges.
*

Posted on Jan 09, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My nec np-m300x has a dynamic contrast error. How do i repair this?


9 Blinks is IRIS error the motor can sometimes produce a clicking sound part number 24B17981. If you pull it out and manually move the metal apart the projector should come on and stay on

Jan 23, 2013 | NEC NP-M300XS- Xga Lcd Proj 3000lumen Shrt...

1 Answer

Does a lamp error message (6 blinking red status lights) mean the lamp needs to be replaced? or could something else be wrong.


According to NEC technical support, if the status light flashes red six times, this could indicate a defective lamp. If a new lamp is installed and the project still won't turn on, the projector will need service.

Jun 15, 2011 | NEC NP400 Projector

1 Answer

MY new NEC NP215 just turn off and has the Status Indicator light red blinking 6 times. It is not the Lamp because the Projector is new.


unfortunately even if it's a new projector, the lamp can go bad. since you stated that it's new, i would get in contact with NEC support, and let me know what going on. it should be still covered under warranty.

May 25, 2011 | NEC NP2150 Projector

2 Answers

HELP! I changed the bulb already. My NEC VT 470 won't turn the bulb on. The green power light comes on, then the status light blinks green about 12 times, several rotations. Then the fan comes on, the...


Sounds like you lamp ballast has gone bad. I good way to verify this is, when you press power on the projector look inside the lens. If you see a small amount of light, then the ballast is good, and the lamp is bad. If there is no light then chances are the ballast is bad.

Apr 14, 2010 | NEC VT470 Multimedia Projector

1 Answer

My lamp light stays on my status blinks


if it's blinking red, how many times? 1 time- lamp cover. 2 times- overheating. 4- fans. 6- lamp. if the lamp led is lit red, replace the lamp.

Dec 09, 2009 | NEC VT460 Multimedia Projector

3 Answers

I have replaced bulbs in 3 different types of NEC projectors: a silver, older model thta uses a VT60LP bulb, model VT595 and VT470. The lamp will still not work - the power and status light just continue...


I had the same issue, what I figured out was that I never removed the lamp door correctly, causing a small plastic piece to break off. To see if this is also your problem, inspect the back of the lamp door, top right corner, if it seems a rectangular plastic piece is missing, thats the problem. It presses in a small button nearby the lamp to let the projector know it's safe to power on.

I've attached an image to help out.ea22ca6.gif

Sep 01, 2009 | NEC VT695 LCD Projector

1 Answer

Status lamp blinking orange 6 times


PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE

Jun 26, 2009 | NEC Multimedia Projectors

2 Answers

Lamp not lighting


Reset the lamp and try it.

Mar 28, 2008 | NEC VT660 Multimedia Projector

Not finding what you are looking for?
NEC VT465 Multimedia Projector Logo

592 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Multimedia Projectors Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a NEC Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...