Question about Office Equipment & Supplies

3 Answers

Agfa drystar 3000

When the system is booting up, it will not go past the checking hardware prompt.. any suggestions?????

Posted by on

  • Anonymous Mar 28, 2014

    AGFA Drystar 5032 Printer
    Lower RF-tag problem
    Do not open tray
    Lower tray dissabled

  • Anonymous Mar 28, 2014

    AGFA Drystar 5032 Printer
    Lower RF-tag problem
    Do not open tray
    Lower tray dissabled

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Dear my Friends,

oftenly there are 03 cause for this reason:

firstly the problem can cause from the Power Supply. you should check for all the led on Power supply unit is light or not. if all of them is lighted please change to next step.

secondly, maybe the hard disk can not boot because the OS of this printer have problem you need to re-install the software for this printer. regularly this cause often is the main cause for this problem because this printer will not stable if the electric is went out while printing 95% for this case must be re- install the software . this is the reason while Agfa always warning you should use a UPS for this printer.

Notice: just only this type drystar3000 have this problem. others type is ds5300 ds5302 ds5500 ds5503 ,. drystar AXYS can solve this problem by itseft.

Thirdly, the cause can be from the Main MEC + THEMIS main boards (seldom happen with this reason)

please help me to re-check again,

do let me know if you have any question.

Regards.

email to : baoagfa@vnn.vn or quocbao.vo@agfa.com

Vo Quoc Bao - Service engineer
Agfa Representative Office in Vietnam.
91 Nguyen Trong Tuyen Str, Ward 15, PhuNhuan Dist-hcmc-vietnam

Posted on Feb 27, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey i need service manula for drystar 3000

Posted on Dec 18, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 495 Answers

Check if any hardware device is connected through USB cable.

Posted on Dec 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When installing the software it comes up with,,, "can not find device"


Don’t connect the printer usb cable first
1st you install the driver disc which is come along with the printer and when the software prompt you to connect the cable then plug the usb cable and follow the instruction.
Also I suggest you to change the usb port and the cable also still if you facing the problem follow these steps, right click on my computer and go to properties then hardware in that click on device manger and check there is any other device is listed if it is there just remove it and click for scan for hardware changes when he prompt for driver reinstall the driver cd.
Hope this helps. Please rate my response.
Thanks.
Have a good day.

Mar 22, 2010 | HP Officejet Pro L7580 All-In-One InkJet...

1 Answer

Will not print from computer


Don’t connect the printer usb cable first
1st you install the driver disc which is come along with the printer and when the software prompt you to connect the cable then plug the usb cable and follow the instruction.Go to printer and faxes option and choose the printer model which you installed just right click on it you will see the option of use printer online. Also I suggest you to change the usb port and the cable also
Go to printer and faxes option and choose the printer model which you installed just right click on it you will see the option of use printer online. Also I suggest you to change the usb port and the cable also still if you facing the problem follow these steps, right click on my computer and go to properties then hardware in that click on device manger and check there is any other device is listed if it is there just remove it and click for scan for hardware changes when he prompt for driver reinstall the driver cd.
Hope this helps. Please rate my response.
Thanks.
Have a good day.

Mar 22, 2010 | HP Officejet J5780 All-In-One InkJet...

1 Answer

LexMark 1270


make sure the usb cable is properly connected and the driver is installed.
Go to printer and faxes option and choose the printer model which you installed just right click on it you will see the option of use printer online. Also I suggest you to change the usb port and the cable also still if you facing the problem follow these steps, right click on my computer and go to properties then hardware in that click on device manger and check there is any other device is listed if it is there just remove it and click for scan for hardware changes when he prompt for driver reinstall the driver cd.
Make sure you install the driver properly and check the test print also .still if u fail check all this setting and follow this steps, 1st you install the driver disc which is come along with the printer and when the software prompt you to connect the cable then plug the usb cable and follow the instruction.
Have a nice day and do not forget to rate please...!

Feb 10, 2010 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

I cannot seem to install my printer ... can you help?? I have an HP Pavilion desktop a 1620n and my printer is an hp psc 2175 all-in-one printer* copier* scanner


if you already install the driver
kindly uninstall the printer driver and software restart the system and don’t connect the usb cable 1st install the driver cd and when it prompt you for connect the usb cable then connect it and follow the instruction. It will resolve your problem.
Also I suggest you to change the usb port and the cable also still if you facing the problem follow these steps, right click on my computer and go to properties then hardware in that click on device manger and check there is any other device is listed if it is there just remove it and click for scan for hardware changes when he prompt for driver reinstall the driver cd.

Feb 03, 2010 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

I just bought a new HP pavilion laptop (because the Nvidia graphics chipset on my Dell went belly up). I pulled the Dell hard drive out and placed it into an external case intending to copy the data onto...


Hi Maltomeal

it seems you know your way around notebooks.
My first suggestion is to take the new hard drive out, and put the old one into the new computer to see if it will at least boot up.

Since I don't know the operating system or the type of format that was on your old hard drive, it is possible that the current operating system you are using will not recognize the old one.

If the hard drive boots up, and it may not recognize some of the drivers because its a different computer configuration, you should still be able to backup to a thumb drive.

If the hard drive does not boot up, then your hard drive has lost its information. You might need to take the hard drive to a data recovery company like ontrack.

thanks adi

Jan 11, 2010 | Office Equipment & Supplies

1 Answer

It is not printing


Go to printer and faxes option and choose the printer model which you installed just right click on it you will see the option of use printer online. Also I suggest you to change the usb port and the cable also still if you facing the problem follow these steps, right click on my computer and go to properties then hardware in that click on device manger and check there is any other device is listed if it is there just remove it and click for scan for hardware changes when he prompt for driver reinstall the driver cd.

Nov 26, 2009 | Lexmark Polaroid P310 Photo Printer

2 Answers

MY LEXMARK X550 PRINTER WILL NOT INSTALL. I HAVE


Don’t connect the printer usb cable first
1st you install the driver disc which is come along with the printer and when the software prompt you to connect the cable then plug the usb cable and follow the instruction.
Also I suggest you to change the usb port and the cable also still if you facing the problem follow these steps, right click on my computer and go to properties then hardware in that click on device manger and check there is any other device is listed if it is there just remove it and click for scan for hardware changes when he prompt for driver reinstall the driver cd.

Nov 17, 2009 | Lexmark X2550 All-In-One Printer

1 Answer

I cannot print


there will be lot of possibilities .just follow all these steps.
first you make sure your printer is working fine just remove the test print form going to printer and faxes option just right click on it and give test print if it is print that means your application have some problem from where you removing print out if test page is not coming then you need to reinstall the drive of printer.

kindly uninstall the printer driver and software restart the system and don’t connect the usb cable 1st install the driver cd and when it prompt you for connect the usb cable then connect it and follow the instruction. It will resolve your problem.
kindly uninstall the printer driver and software restart the system and don’t connect the usb cable 1st install the driver cd and when it prompt you for connect the usb cable then connect it and follow the instruction. It will resolve your problem
In run window type services.msc and the go to print spooler option just stop and restart the service. and also switch off and switch on the printer and try to cancel all the documents form print spooler it will remove all pending jobs. Go to printer and faxes option and choose the printer model which you installed just right click on it you will see the option of use printer online. Also I suggest you to change the usb port and the cable also still if you facing the problem follow these steps, right click on my computer and go to properties then hardware in that click on device manger and check there is any other device is listed if it is there just remove it and click for scan for hardware changes when he prompt for driver reinstall the driver cd

Nov 17, 2009 | Office Equipment & Supplies

1 Answer

Printer will not print


Make sure you install the driver properly and check the test print also .still if u fail check all this setting and follow this steps, 1st you install the driver disc which is come along with the printer and when the software prompt you to connect the cable then plug the usb cable and follow the instruction.

Go to printer and faxes option and choose the printer model which you installed just right click on it you will see the option of use printer online. Also I suggest you to change the usb port and the cable also still if you facing the problem follow these steps, right click on my computer and go to properties then hardware in that click on device manger and check there is any other device is listed if it is there just remove it and click for scan for hardware changes when he prompt for driver reinstall the driver cd

Sep 24, 2009 | HP Officejet 5610 All-In-One InkJet...

2 Answers

Can't print over network


make sure you have an ip address on the printer and that the lan speed is correct, from a command prompt you should be able to ping the printer.

>>>ping <ipaddress of printer>

Aug 14, 2008 | Canon imageRUNNER 3300 All-In-One Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98829 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

63990 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...