Question about Bosch Axxis WFL 2060 Front Load Washer
The dispense tray is filled with Washing powder and the middle section is loaded with liquid softener. The machine takes the powder but at the end of the cycle the softener is still in the tray and has'nt been utilised?
I have checked and cleaned the dispense tray which shows no damage.
We did not have this problem when we first had the m/c? Bosch WFL 2872 Front load washing m/c
Don't use powders!
they gum up the works
so you need to keep cleaning out the system and maybe replacing the valving part.
use very hot water in the dispenser a few times. let soak too
Posted on Dec 12, 2008
Hi. Assuming the washer has completed the rinse sequence, there is a possibility the dispenser part of the valve could be faulty. I assume that you have put the conditioner in the right compartment of the dispenser.. If all else seems to be o/k, I recmmomend thay you once again thouroughly strip and clean the dispenser..
The other possibility is that the hole where the water comes in at the top of the dispenser is blocked.
You need a stiff piece of wire with a hook on the end and poke each hole that you can see in the top of the dispenser compartment
This should solve the problem
Please leave feeed back.
Posted on Dec 03, 2008
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 14, 2015 | Ariston Technologies AW125NA 13 lbs. Load...
Jul 26, 2011 | Kenmore Washing Machines
Feb 28, 2011 | Hotpoint Ariston AW125 Front Load Washer
Feb 13, 2011 | LG Washing Machines
Feb 15, 2009 | Bosch Logixx WFT 2806 Front Load...
Dec 17, 2008 | Whirlpool Duet GHW9150P Front Load Washer
Aug 03, 2008 | Whirlpool Washing Machines
Jun 05, 2008 | LG WM2688H Front Load Washer
Dec 29, 2007 | Washing Machines
231 people viewed this question
Usually answered in minutes!