Question about Washing Machines

1 Answer

Maytag Lat 8434 Top Loader will not cycle

My Maytag will not work through the whole cycle. On Regular cycle theMaytag only fills with water then does nothing else, but the dial stillmoves around until the cycle ends. On Delicate it fills and agitatesbut will not spin, but the dial moves around until the cycle ends. This problem has been getting worse over the past week. At first theonly issue was no spin on Regular cycle.

Posted by on

  • digitalnamsh Dec 13, 2008

    Your "expert" may not have much experience with this model, but the problem is common enough he could have said "Usually the problem involves _____. But since I do not have much experience with this model I cannot say for sure. Hopefully that gets you started." Giving me some idea would have been better then: "So I really have no advice for you." Might have given me better incentive to buy a plan from your website, with the hope you could actually help me.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Washing Mach... Master
  • 2,651 Answers

Sorry but i dont have much experience with this particular model, so i really have no advice for you, please repost

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Won't start


if it filled proplerly and won't start now, it sounds like the door switch is broken, there could be something wrong with the rest of the electrical systems, however i would suggest the switch first. If there is a lot of noise like its trying to run, then its probably your transmission.

Jun 25, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag neptune front loader


check the following
power cord plugged into a grounded 3 prong outlet
the inicator on the cycle conrol knob proprely lined up with a cycle? turn the knob to the right slightly then pull the knob

are you using a extention cord if so dont

washer overloaded

Jul 19, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Kenmore 80's series top loader only works on wash and rinse cycle


This is a problem with the pump being stuck so the motor cant turn the whole thing. Turn the washer on its side, underneath you can acces the pump, which is connected to the motor by two long clips. remove the pump and take out the colg that caused it to get stuck.

Jul 01, 2009 | Washing Machines

1 Answer

I have a maytag washer # LAT 9593 , washer fills with water very


Take off your hoses and check filters for sediment build up. If this is ok, you may need to replace the water inlet valve.

Feb 04, 2009 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

Maytag Top Loader won't work on Regular Cycle


I suspect bad motor windings. it has enough power to run delicate but not other cycles?

Nov 13, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Washer filled with water & then stopped & will not work in any cycle.


could be a bad pressure switch did it fill all the way is it a top loader or front loader any noise or nothing

Dec 31, 2007 | Kenmore 24622 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...