For my D-Link AirPlus Xtreme G DI-624?
Just want to keep it up to date, as from time to time, my internet
processes are interrupted. I often have to reconfigure the the DI-624
& then it'll start working again!
Would appreciate any help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you sure you need to update it? Latest version, to my knowledge, is 2.76.
Go to http://www.dlink.com/products/?tab=3&pid=DI-624&rev=DI-624 and then look for "support resources" and firmware.
Step 1 Download the latest firmware.
Click here to download the latest firmware for the VDI-604 - http://support.dlink.com/products/view.asp?productid=VDI-604#firm
Click here to download the latest firmware for the VDI-624 - http://support.dlink.com/products/view.asp?productid=VDI-624#firm
Step 2 Open a web browser and type the IP address of the VDI-604 or VDI-624 in the address bar (default is 192.168.0.1). Press Enter.
Step 3 The default username and password is listed below for your version of firmware:
VDI-604 firmware 1.05F/VDI-624 firmware 2.39DDM - The default username is admin and the default password is blank (nothing).
VDI-604 firmware 1.07 Build 28/VDI-624 firmware 2.43 Build 12 - The default username is admin and the default password is password.
Step 4 Click on the Tools tab at the top and then click Firmware on the left side.
Step 5 Click Browse and navigate to the .bin file you downloaded in Step 1. Select the file and then click Open.
Step 6 Click Apply. It may take a up to 30 seconds for the firmware upgrade to complete.
Step 7 When prompted click Continue. The firmware upgrade is now completed.
Step 8 If you get a Page cannot be displayed or similar error after clicking Continue, close the web browser and re-open it. Repeat Step 2 to login to the web-based configuration.