Oki Microline 320 Turbo (9 Pin Printer)
When printing an invoice thats takes more than one page (continueous pastel paper) I am finding the first page prints perfectly, and from the 2nd pg onwards the printer rolls halfway down the page (invoice) before starting printing the 2nd page resulting in going on to page 3 and 4 and so on. What setting do i need to change to correct this.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
We swapped out the printer for another one we had in the office that was working. The new printer also got the alarm light. From that we concluded that it was a bad serial card. We swapped the serial card from another printer, and the original printer started working perfectly. Now we just need to find out where we can purchase another serial card, as we have no more 'spares' around here.
if you take the cover off on the left or right on the bar the bar where the carriage and head ride, there is a tab that will adjust the head gap, be careful if you get it 2 tight you my damage the print head
also I've see this be a bad head, pins not fireing all the way out.
print out your menu of the printer and load the IBM Proprinter driver in windows ,your printer default driver is IBM Proprinter this will sort out the problem.you have probably loaded a OKI driver while the printer is set for IBM.Hope this helps.