- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
4010 CALIBRATION (newer models) released 12/8/95 1. Press and hold the ZERO and lb/kg keys simultaneously. 2. Press and release the ON key while still holding the ZERO and lb/kg keys. 3. Continue holding down both keys until display shows CALB. 4. Press ZERO to reset and apply 130 pounds to the platform - display shows a count which must be greater than 500. 5. After the count stablizes press the lb/kg key to save this value. - display now shows END. 6. Press OFF to turn scale off
Calibration instructions for Older Model 4010 (with a date code of 5103 or older) 1. You will need 3 – 50 lb weights to calibrate this scale 2. Turn off scale 3. Press and hold the LB/KG and the ZERO button simultaneously and continue to hold till instructed in step 5 4. Press and release the ON button 5. The unit will display a number. Release the LB/KG and ZERO buttons. You will see a number on screen. Press the ZERO button and you will see C50 6. Place the 50 lb weight on the scale and press ZERO. You should see C100 7. Place another 50 lb weight on the scale (total 100 lb) and press ZERO. You should see C150. 8. Place the remaining 50 lb weight on the scale (total 150 lb) and push ZERO 9. You will see a final message (end) and the scale should shut off Your scale should now be recalibrated
The scale may have instructions on the bottom of the scale. (Example for the Tanita: The Ultimate Scale w/ the body fat analysis). The instructions on the back state the following steps: Step 1: press both the "Set" and the triangle buttons. Step 2: press the "triangle" button until you select the appropriate weight measurement (a) kilogram, (b) stone lbs or (c) lbs. Step 3: press the set button.