Question about HP DeskJet F380 All-In-One Printer
On 818 hp cartridge five holes are there, which colour ink on which hole i have to put ink on them
Posted on Jan 19, 2009
Just open the sticker and there is a small hole on the body .get a inkjection with needle on top insert the needle in the upper hole and press the inkjection not more then 8 ml ink should be inserted.after you refill the ink just blow from the top where you refilled the ink .2 to 3 drops of ink should be dropped out from the nozzle clean the inked nozzle with a dry tissue.and then stick the sticker again on the body.and your cartridge is refilled.enjoy.laugh.climp.jump.run.clap.dance.shout.scream.give your self a tight pat on your back.say your very good.and have fun.woopy .you did it. ha ----ha----ha---ha---
Posted on Jan 16, 2009
Fill the catridge the usual way and then do the following it works
Remove both black and color cartridges from your printer. Turn the printer on and off 5 times. In between the on and off allow twenty seconds for the machine to power down completely. When turning the printer on allow it to go through normal start up so that it realizes there are no cartridges. Some HP printers retain the ID of the last 5 cartridges used (black and color).
Posted on Mar 12, 2009
Remove the cartage first then open the sticker and there is a small hole on the body buy a inkjection with needle on top insert the needle in the upper hole and press the inkjection not more then 8 ml ink should be inserted.after you refill the ink just blow from the top where you refilled the ink .3 to 5 drops of ink should be dropped out from the nozzle clean the inked nozzle with a dry tissue.and then stick the sticker again on the body.and your cartridge is refilled.Try testing it.
Posted on Aug 19, 2012
Enrico1988 Ur Solution worked for me like magic.Thanks a lot
Posted on Mar 21, 2011
i have injected 5 ml black ink in my 818 cartridge and inserted in my HP deskjetF2418 printer but it is not working and showing empty signal
Posted on Jan 02, 2010
First Hole light cyan, scond hole cyan, third hole megenta, fourth hole yellow, fifth hole light megenta. now check. it will support Photo quality.
Posted on Sep 03, 2010
Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud
Posted on Jan 30, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 20, 2010 | HP DeskJet F380 All-In-One Printer
May 03, 2010 | HP DeskJet F380 All-In-One Printer
Sep 08, 2009 | HP DeskJet F380 All-In-One Printer
Jan 12, 2009 | HP DeskJet F380 All-In-One Printer
Jan 04, 2009 | HP Printer Cartridges (Complete List): ,...
Dec 02, 2008 | HP DeskJet F380 All-In-One Printer
15,846 people viewed this question
Usually answered in minutes!