Question about Office Equipment & Supplies

2 Answers

Canon pixma ip1300 initialisation problem

Canon pixma ip1300 produces an error (both LEDs are alternately blinking) on powering on.on connecting the printer with pc and giving a printing command, it does not printing. shows cartridge installation problem. but on reinstalling the cartridge it produce the same error. some time produce `service error 5600` service error 5100

Posted by on

  • Anonymous Feb 23, 2009

    canon pixma ip1300 produces an error (both LEDs are alternately blinking) on powering on.on connecting the printer with pc and giving a printing command, it does not printing. shows cartridge installation problem. but on reinstalling the cartridge it produce the same error. some time produce `service error 5600` service error 5100

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a canon ip 1300 produces an error(both LED's are alternately blinking one blink for the green led and 5 blink from the orange led) then it will produce an error 5600.

Posted on Feb 24, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Just replace the colored cartridge with a new one.

Posted on Sep 02, 2009

2 Suggested Answers

  • 1 Answer

SOURCE: canon pixma ip1300 initialisation problem

service error 5100 on canon pixma ip1300

Posted on Sep 01, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why can't I stop alarm and power buttons from flashing?


Alarm button flashing - Fixya

www.fixya.com > ... > Canon PIXMA MP150 All-In-One InkJet Printer
Canon PIXMA MP150 All-In-One InkJet Printer, alarm button flashing related issues. ... Question about Canon PIXMA Printers & Copiers ... ...button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power ... On the led screen there is an error code that says 6A00 and I can't get the printer to work.

Customer Reviews: Canon PIXMA MG2920 Wireless Inkjet ...

https://www.walmart.com/reviews/product/38067902

WalmartShop all · Lawn Mowers · Power Equipment .... Canon PIXMA MG2920 Wireless Inkjet All-in-One Printer/Copier/Scanner, ... It will then instruct to hold the wireless buttondown until the alarm led blinks once. ... The printer will register and the wireless led willstop blinking. .... A multi-function printer at this price can't be beat!

Hi! I have a canon pixma mp160. The alarm is flashing a E -

www.justanswer.com > Printers

Dec 17, 2015 | Office Equipment & Supplies

1 Answer

Resetter of canon iP1900


Step 1 : Reset Hardware
  1. Turn off Canon Pixma iP1900, iP1300 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the Canon Pixma iP1900, iP1300 Printers should turn off, if not, press the Power button once more.
  8. Your Canon Pixma iP1900, iP1300 Printers should respond as normal

Jul 06, 2011 | Canon Office Equipment & Supplies

1 Answer

No imprime


Resetter canon iP 1700 and iP1300
Step 1 : Reset Hardware
  1. Turn off Canon Pixma iP1700, iP1300 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the Canon Pixma iP1700, iP1300 Printers should turn off, if not, press the Power button once more.
  8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal

Jul 06, 2011 | Canon PIXMA iP1300 Printer

1 Answer

Canon pixma ip1300 printer ink absorber is full...


First download this tool http://www.ziddu.com/download/11944259/PCM_servicetool.rar.html
Then follow these steps
Step 1: enter in service mode in order to used the resetter:

  • Turn off the printer without pulling the power cords.
  • Hold down Resume button and press Power button.
  • Keep holding down Power button and let Resume button go.
  • Then Press Resume button 5 times then let both buttons go.
  • The Alternate Blinking error is gone: the printer is in Service Mode state.

Step 2:

  • Extract the resetter and double click "servicetool.exe"
  • Click Reload Button and you will get a new USB port.
  • Load some papers in your printer and press the "Main" Button, wait until it shows "error 001" then press OK.
  • Then press "EEPROM" button and the printer will print some text, after that click OK
  • Then power off the printer (sometimes you have to press twice the power button to turn off) and turn on again.
  • That's done.
I hope this helps, if so please rate this answer below Regards GM

Apr 21, 2011 | Canon PIXMA iP1300 Printer

1 Answer

Hi i have a problem here IP 1300 canon printer it says that i don't install cartridge properly but i try to reset it and still desame..the orange light still blinking and also the green light please help...


fallow this procedure it will help.
  1. Turn off Canon Pixma iP1300 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the Canon Pixma iP1300 Printers should turn off, if not, press the Power button once more.
  8. Your Canon Pixma iP1300 Printers should respond as normal

Apr 20, 2011 | Canon PIXMA iP1300 Printer

1 Answer

How can i reset my canon pixma ip1300?


1. turn off canon ip1300
2. hold down resume button then press power button
3. keep holding down power button and let resume button go
4. press resume button 2X then let buth button go
5. green light will flash and then stop blinking
6. when gree light are solid press resume button 4X
7. press the power button, your printer canon ip1300 will turn off, if no press power button ance again
8. press power button to turn on printer, and your printer should response normal

i hope this helpfull
thanks for using fixya

Jan 27, 2011 | Canon Office Equipment & Supplies

1 Answer

THE INK ABSORVER IS FULL


Resetter canon iP 1700 and iP1300
Step 1 : Reset Hardware
  1. Turn off Canon Pixma iP1700, iP1300 Printers
  2. Hold down Resume button and press Power button.
  3. Keep holding down Power button and let Resume button go.
  4. Press Resume button 2 times then let BOTH buttons go.
  5. Green lights will flash and then stop blinking.
  6. When green lights are solid, press the Resume button 4 times.
  7. Press the Power button and the Canon Pixma iP1700, iP1300 Printers should turn off, if not, press the Power button once more.
  8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal
Step 2 : Using software resetter
  1. Download Software Resetter for Canon Printers iP1300 dan iP1700 Software Resetter for Canon Pixma iP1300, iP1700
  2. Ekstrak/Unrar/Unzip the Software
  3. run GeneralTool.exe
  4. Select USB Port where the canon ip1300 or canon ip1700 installed.
  5. CLick Lock Release button
  6. Select EEPROM CLEAR
  7. Click Test Pattern 1 button
  8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal.
Resetting Ink-Waste Ov

Nov 27, 2010 | Canon PIXMA iP1700 InkJet Photo Printer

1 Answer

Alarm lights keep blinking after I changed my printer ink.


E5 means cartridges error - to fix press the "stop\reset" button for 5-7 seconds and then release it.

You can also try this:

1) With the printer power turned off but connected to a power source, while pressing the Resume/Cancel button, press and hold the Power button.
(DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)

3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and
Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)

4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time(s)according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and
Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

4 times----Green (Power)------Waste ink counter resetting

Apr 07, 2010 | Canon PIXMA MP240 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,933 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98796 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...