Question about DFI AK74-SC Motherboard

1 Answer

I HAVE MY PROBLEM REGARDING MY MOTHERBOARD, AMD ATHLON EP-8KTA3L

IT DOESNT PERFORMS WELL, I DONT KNOW IF THE POWER SUPPLY CAUSED THIS MALFUNCTION. REFORMATTING DOEST WORK. PLEASE GIVE ME THE ACTUAL SPECIFICATION OF MY MOTHERBOARD. MY FRIEND TRAIDED THIS WITH MY AOPEN MOTHERBOARD.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 183 Answers

Specification DFI AK74-SC Model DFI AK74-SC Socket Socket A Motherboard CPU AMD Athlon /Duron processor 600MHz-1.2GHz and faster Chipset VIA KT133/686A Memory 3 DIMM sockets
max. 1.5GB (unbuffered or registered)
Supports PC 133/ VCM SDRAM BIOS Award / 2Mbit Power Management ACPI and OS direct power management
Wake-on event: RTC/Modem/LAN Hardware Monitor System and processor temperature Expansion Slots 1 AGP slot (Supports 4x/2x AGP)
4 PCI slots
1 AMR slot
1 ISA/PCI slot Audio AC`97 Audio codec with Yamaha AP Super I/O 2 x NS16C550A compatible UARTs
1 x SPP/ECP/EPP parallel port IDE Dual PIO mode 3/4 EIDE channels up to 4 IDE devices
Ultra DMA/66 transfer rate up to 66MB/sec Rear Panel I/O Ports 2 x USB, 2 x DB-9, 1x DB-25, 1x PS/2 Mouse,
1 x PS/2 Keyboard, 1 x game/MIDI, 3 audio jacks I/O Connectors 1 x IrDA, 2 x external USB, 2 x IDE, 1x Floppy,
1 x ATX power, 3 x fan, 1 x WOR, 1 x WOL, 3 x internal audio Form Factor 4 layers ATX Motherboard Form Factor
30.5 cm x 22 cm 12.0 inch. x 8.66 inch. Warranty DFI AK74-SC Motherboard Pro DOA Warranty ONLY
DOA DFI Warranty
DFI Warranty
motherboard

If you want more Information then go to this link :-

http://www.motherboardpro.com/Motherboard-With-ISA-Slot-DFI-AK74-SC-1-ISA-4-PCI-AGP-Socket-A-ATX-Used-Motherboard-p-39.html

Posted on Dec 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Amd athlon tm 2400+ recognised as a athlon 1800+ why


Make sure your FSB(FrontSide Bus, aka 'CPU External clock is set to 166MHz both in BIOS and via jumper on your motherboard - refer to your manual for details.
i should be jumpered accordingly.

Jun 03, 2010 | EPoX EP-8KRA2+ Motherboard

1 Answer

Amd athlon xp 2400+ problems witha epox ep-8kra2+ motherboard?


It sounds to me like the processor that you bought is not fully supported in the current bios in your mobo. I would check the epox website for newer bios. Be careful flashing the bios, if you misstep in the flash, you may end up with a brick. If you are successful, you should be able to run the processor at the speeds you expected, though within the limits of the hardware on the mobo. Also look at the spec's for the mobo on the site to see if your processor is listed as being supported.

Feb 14, 2010 | EPoX EP-8KRA2+ Motherboard

1 Answer

Amd athlon xp 2400+ thoroughbred??


i am sure it will fit...because both are from same family and consists of same architecture only the bus speed of 2400+ is little bit higher than the other mentioned...
cheerrss..pls rate...

Jan 04, 2010 | EPoX EP-8KRA2+ Motherboard

1 Answer

I want a motherboard of all winfast computers but i dont know wich model but the thing i know in ide is sis 964 pqc2811 0552 ga


you should get a epox ep-8kra2+ they are really good 3 memory slots
6pci ports 1 agp port amd athlon processor they are really good motherboards i have got one as well any believe me they will never fail on you

Jan 03, 2010 | Microsoft Windows XP Professional

1 Answer

AMD Athlon XP 2200+ vs amd athlon xp socket a 1350+ 1.35ghz


AXDA2200DUV3C is the part number. Do you need anything else?

Jan 02, 2010 | EPoX EP-8KRA2+ Motherboard

1 Answer

Amd athlon xp 2200+???????????????


Your EPoX board should support AMD Athlon 2200+ Socket A processor.

Jan 01, 2010 | EPoX EP-8KRA2+ Motherboard

1 Answer

What processor is used with this motherboard and


Any AMD Athlon, Athlon XP, or Duron should work.

Dec 30, 2009 | EPoX EP-8KRA2+ Motherboard

3 Answers

New processor for my compaq presario sr1810nx


for better gaming performance u need a Graphics card of nvidia or abt 4 gb of ram....bt 1.8 ghz processor can't  go smoothly with High performance Games...so its better to change ur motherboard instead of wasting money on such things becoz only selected games will run on 1.8ghz processor...KSHITIJ

Jun 17, 2009 | Compaq Presario SR1810NX Sempron 3200+ 1.8...

1 Answer

Athlon 64 mobo, can i use an athalon 64x2 chip in it?


according to the epox site you can use either AMD Athlon-64 or Athlon-64 FX. Check site at address below for your board info.
http://www.epox.com/USA/product.asp?id=EP-9NPA3ULTRA
took awhile to find info, please take time to rate this answer.

thanks and good luck
.

Jan 25, 2009 | EPoX EP-9NPA3 Ultra (EP9NAPA3ULTRA)...

Not finding what you are looking for?
DFI AK74-SC Motherboard Logo

492 people viewed this question

Ask a Question

Usually answered in minutes!

Top DFI Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Roy May

Level 2 Expert

279 Answers

Columbus Makubika

Level 3 Expert

533 Answers

Are you a DFI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...