Reset button on a Kodak Z981

Floyd, Kodak Driver Downloads , check the link and download the appropriate driver and install on your comuter.

Floyd, Download and install Kodak Easy Share Z981 Digital Camera software. Check the attached links Z981 software download,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
KODAK EASYSHARE Z981 Digital Camera Firmware WINDOWS Operating Systems
http://resources.kodak.com/support/pdf/en/manuals/urg01118/Z981_xUG_GLB_en.pdf
Kodak Driver Downloads

you didn't think to try Google then?

http://www.kodakdriver.com/kodak-easyshare-z981-software/

Did you install Kodak Picture Easy Software already?
To transfer pictures from your camera to the computer, you need this software (and the driver that comes with it)
If you done't have the software, try to get it with Kodak, or use an external memory card reader, to transfer the pictures from the memory card to the computer. That must work.

There is no reset button on the Z981. There is a "Reset Camera" command in the Setup menu, as described toward the bottom of this page.

click here and check its manaul and fin the solution.
http://resources.kodak.com/support/pdf/en/manuals/urg01118/Z981_xUG_GLB_en.pdf

There is a tab on the memory card so you will you need to remove it from the camera and change the position of this tab to "unlock" it.

This question-post has duplicated; check the answer in this previous question: find_manual_z981kodak_easy_share

Good luck.

According to the Kodak website the Z981 can be set up for date stamp. I could not locate a users guide, but it mentions it under Custom settings.

You can view it online and/or download a PDF version from the manufacturer's web site at
http://support.en.kodak.com/app/answers/detail/a_id/19290/kw/z981