How to connect a cd recorder to receiver and mixer?

how do i record on it

Dos it offer a reason visually, like with a message, or is it just stubborn?

It will only record on media specifically labeled for Music or Audio.

Assuming you have a functioning turntable either self-pre-amplified or through a component (such as a receiver or integrated amp) with an internal Phono preamplifier just connect the self-preamplified TT directly to the analog inputs on the CD Recorder; or connect the CD Recorder to the receiver / integrated amp as if it is an analog tape deck (which it functionally is in this case).

red n white phono leads from deck 1 to channel1phono ports on mixer
red n white phono leads from deck2 to channel2 phono ports on mixer
then output out to amp

PDF file

you should be able to get it from manualfox.com

I have one somewhere I can scan and post. Sorry can't fax you as am in UK.

If you confirm they are music use CDR's or 'consumer audio' then it sounds like your drive is dead. Can it read normal cd's? When you open the tray can you see that the disc has actually been spun i.e the disc has changed position at all?

Here you go: xg-2000: http://www.geminidj.com/disc._prod_manuals/AMPS/XG-2000/XG-2000.pdf PMX-3501: http://www.geminidj.com/disc._prod_manuals/MIXERS/PMX-3501/PMX-3501.pdf Hope this is what you want

I recently resolved CD-R recognition problems with the KLH CDR2000. It's absolutely imperative that you utilize CD-Rs bearing the logo "COMPACT DISC DIGITAL AUDIO RECORDABLE". These specific CD-Rs are designed for digital music recording with the KLH CDR2000 and other simular products. I have a Marantz CD20 that has the same CD-R requirement. I purchased a Memorex 50-pack from Best Buy for approximately $20.00 plus tax. The recordings with the Memorex CD-Rs are immpressive for the KLH CDR2000 given the obvious flaws in design. Again, when searching for compatible disc for the KLH CDR2000 look for the words "DIGITAL AUDIO" within the "COMPACT DISC RECORDABLE" logo.