Question about Logitech X-540 Multimedia Surround Sound Speaker System (6-Piece)

1 Answer

I have a x-540 speaker system I brought today. Do I need a sound card to make it work with my pc. I hook it up/no sound.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 237 Answers

A stereo computer system with resources to produce and record surround sound channels. Such surround sound channels are played or recorded using an audio card added to the computer system, which audio card controls additional speakers and/or microphones. Software for redirecting instructions from existing stereo application programs and sending these instructions to the existing audio device driver and the additional audio device driver is needed. Resources for processing the digital audio data for either extracting surround sound channels from two channel data provided by the application, or for encoding two sets of two channel audio data recorded by the two audio cards is also needed

Posted on Dec 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a new dell inspiron. I just purchased Logitech x-540 surround sound speaker system. The right front, left front, and center speakers don't work. Everything seems to be hooked up right. Any ideas. Is...


Yes there has to be a configuration for the 5.4 surround sound... look if the hardware came with a CD to update the sound driver. or Check if the its correctly configured. on the control panel then click Sound, then depending what windows you have have to lookk for the configuration or properties area and configure as 5.0 or sorround etc.

Feb 21, 2010 | Logitech X-540 Multimedia Surround Sound...

1 Answer

Part of my speakers are just not working. Hooked up, and unhooked and re hooked, but not all speakers working. Right now just 2 of seven are working.


If u have a surround sound card that supports up to the amount of speakers u have (5.1 or 7.1) try change the speaker settings in control pannel as follows.

Start>control pannel>sound>
and see if u have the setting on stereo, if so change it to the 5.1 or 7.1 setting.

If u have software on the otherhand for your sound card you can configure the settings there to change from stereo to surround sound.

Hope this helped :)


Dec 14, 2009 | Logitech X-540 Computer Speakers

1 Answer

No sound from X-540 speakers


are you getting power out of the speakers? tried them elsewhere? maybe the port burned out on the board and an audio card maybe needed. try an audio card and see if that works and return to best buy (if you have one near you) if thats not the problem. you can try to reset your motherboard to default values? if the computer shows your drivers working properly then maybe its the speakers. ive seen tht happen to good speakers. its a bummer deal!

Jun 06, 2009 | Logitech X-540 Computer Speakers

1 Answer

LogitechX540 speakers hooked them up to our PC makes raspy sound


you might try putting in a new sound card to see if that dosent help. it should take care of the problem

Jan 11, 2009 | Logitech X-540 Multimedia Surround Sound...

2 Answers

Logitech X-540 connecting to dell dimension 3000 ???


Your problem is you have a 3 channel sound card on your dell and you bought 5 channel speaker system. You can plug the green to green and get 2.1 sound but you will have to by a 5.1 pci sound like in the link below to get the full use of your 5.1 system.


http://www.mikescomputershop.com/asus-xonar-d2pm-sound-card-p-2357.html

Sep 08, 2008 | Logitech X-540 Computer Speakers

1 Answer

No sound


are u using vista? cause this is def a driver issue...could be the update Driver they released messed up things or the driver needs a updated from windows...it wouild help if u posted the driver version and Operating system u are using.

Mar 10, 2008 | Logitech X-540 Computer Speakers

1 Answer

X-540 Speakers


go into sound device on control panel. make sure digital is unchecked.

Feb 08, 2008 | Logitech X-540 Computer Speakers

1 Answer

No sound


Hi,

To my knowledge, a Logitech X-540 does not need a driver to operate. However, it is the sound card in the PC that would need drivers. Further, the sound card should be capable of 5.1 surround sound system and should have three (3) sound output which includes. All of these would have individual jacks to match the different plugs of the X-540 (green, black and orange plugs). The X-540 in turn would output the 3 inputs to front pair, rear pair, center and sub woofer. The green goes to the front L/R, the black to the rear L/R and the orange to the center/sub.

Perhaps you can post back with the brand/model of your PC , and your soundcard or motherboard. Knowing your OS would also be helpful.

Hope this be of help/idea. Pls post back as requested, how things turned up or should you need additional information.

Good luck and kind regards.

Feb 03, 2008 | Logitech X-540 Computer Speakers

Not finding what you are looking for?

Open Questions:

See all Logitech X-540 Multimedia Surround Sound Speaker Questions

Logitech X-540 Multimedia Surround Sound Speaker System (6-Piece) Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computer Speakers Experts

Lawrence Oravetz

Level 3 Expert

7580 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

10628 Answers

L Pfaff
L Pfaff

Level 3 Expert

11573 Answers

Are you a Logitech Computer Speaker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...