Question about Onkyo TX-SR606 Receiver

1 Answer

ONKYO TX-SR606 Single output to TV

I have the ONKYO TX-SR606 and have connected my Cable tot he reciever via compisite input and DVD player to the reciever via Component Input.

i have connected a single output to the TV via Component Out.

I am not getting any picture from the Cable to TV. Any Help

Posted by on

  • kcsozou Dec 09, 2008

    Great Help



    Thanks

  • Kangaroo46 Mar 04, 2009

    I have an Onkyo TX-SR606 hooked to Dish Receiver on one side and a Mitsubishi Diamond 65736 HDTV on the other. I currently have Dish receiver connected via HDMI cable to the Cable/Sat input on the back of the 606. I have the TV connected with an HDMI cable from the OUT to one of the 3 Mitusubishi's HDMI cable input jacks. I get great sound, but am unable to get a picture. therefore, I hooked the video cable straight from the Dish 722 Receiver to the TV. It works, but since it isn't coming from the 606 I can't see any of the setup screens.

    How can I get video from the 606 to TV. What am I missing.
    I had it working great and bought a new TV/equipment stand so had to unhook when I reconnected the situation above is what I found. Yes! I marked the connections with tape, but I've missed something.

    UNCONNECTED

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 17 Answers

Hi there. for your receiver, the only time it can upconvert is when you go out as HDMI. In your current hookup (component out to tv) the signal from your cable (using a composite) will not be able to pass through the component cable. This means you either have to hook up your cable box using a component cable as well or add a composite cable (yellow) from monitor out of the receiver to the tv. Page 22 of the manual will show a diagram of the video signal flow. hope this helps.. ^_^

Posted on Dec 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HDMI signal cuts out for a few seconds constantly from receiver to television. It does it when switched to cable box and the roku box. Onkyo TX-SR606 Scientific Atlanta Cable box thru HDMI Roku Box...


Mine did the same thing where the screen would go black for a few seconds and then the picture and sound came back. I would try (1) switch HDMI cables, (2) try a different HDMI input in the back of the receiver, (3) try different input in the back of the TV. None of these seemed to work with mine. I finally ended up running the cable box direct to the TV and only run the audio through the reciever via coax or digital. No more problems. I think the HDMI inputs in the back of the reciever have a problem continuously carrying the signal if it is the leaset bit weak.

Sep 08, 2010 | Onkyo TX-SR606 Receiver

1 Answer

I am having HDMI output issues to my HD TV. The issues are intermmitent. I have my HD cable box, BluRay Player both hooked into the reciever via HDMI. The Hdmi output of the reciever feeds my TV. I have...


Have you proven that a straight shot HDMI to the TV from either source solves the problem?

For all we know the TV or it's HDMI cable could be faulty.

Apr 09, 2010 | Onkyo TX-SR606 Receiver

5 Answers

I cannot get video signal from my Samsung p1590 Blu Ray player via HDMI to pass through my Onkyo TX-SR606 AV Receiver. I get video if I connect Blu Ray player directly to TV, and have tried all HDMI ports...


I think this one is for the Onkyo wizards:

I would write them via email here:

http://www.onkyousa.com/feedback_form.cfm

1-800-229-1687
However I did find this 2 page hookup manual with nice notes at link listed below that may help you solve the mystery:

(seems you may have to assign the digital input)

http://filedepot.onkyousa.com/Files/QuickHookup/TX-SR606_QSS_En_A.pdf?CFID=918117&CFTOKEN=40624545&jsessionid=f0306ea8a0d68bb60a49102e3e5510576756


Assigning the Digital Input
If there’s no sound, you’ll need to assign the digital inputs as
necessary using the setup menus on the TX-SR606’s display.
If you connect your DVD player to the AV receiver’s COAXIAL 1
DIGITAL IN, and your cable/satellite receiver to the COAXIAL 2
DIGITAL IN, as shown, it’s not necessary to assign the digital input.
The onscreen setup menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the
COMPONENT VIDEO OUT, use the TX-SR606’s display when changing settings.

Thanks for using FixYa!

Kelly

Feb 19, 2010 | Onkyo TX-SR606 Receiver

3 Answers

Onkyo SR606 video upconversion problem.


Pressed and held cable/sat button on front of unit until "Attenuate" came up. Changed setting from 0 to 2

Oct 19, 2009 | Onkyo TX-SR606 Receiver

1 Answer

No audio from pc connected using hdmi


Are you not getting audio to the television speakers and the onkyo reciever speakers when connected HDMI thru the reciever or just the television. If it is just thru the television then it is because the reciever is grabbing the HDMI audio signal and converting it so it does not reach the TV. If it is both then try changing the HDMI signal output from PCM to DOLBY DIGITAL on the computer. Your reciever may not be able to process the PCM signal of the computer. Does the reciever show a PCM or DOBLY DIGITAL display when HDMI is hooked up to it?

Oct 03, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo tx-sr606 turns off during loud dvd sounds.


It sounds like you have a defective unit. I would contact the manufacturer and ask to RMA it.

Aug 08, 2009 | Onkyo TX-SR606 Receiver

2 Answers

No audio sound from HDMI connection from TV to Onkyo 606 amp.


you have the output of the receiver going to the input of the TV?

i believe that you should be running the TV output to the receiver input to get your sound from the TV to the receiver and thus speakers.

the easiest setup is to just run your cable box and DVD player HDMI's into your TV inputs. then run another HDMI from the TV output to the receiver input.

Feb 28, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo TX-SR606 getting no sound from HDMI sources on speakers. I have a motorola cable box and a panasonic DMP BD-35K blueray player both attached to the SR606 via HDMI cables (HDMI3 and 1 respectively)...


Not sure if this is your fix, but I had what I thought was the same problem. I played with my Onkyo quite a bit ensuring the correct assignments for HDMI, audio and all that stuff. Turns out I neglected to make sure the output devices were properly assigned. Many devices aren't default to output sound over HDMI. I changed the audio out settings on the cable box to HDMI and suddenly the Onkyo worked great. I know, I'm an idiot for not checking that in the first place, but maybe someone out there is having the same trouble as well.

Feb 20, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Onkyo tx-sr606 can not get it to work w tv using hdmi cables


try using a HDMI cable connecting the receiver from the "out" to the tv, then allocate through the setup menu what you have connected, say a cable box by hdmi, you would go to cable/sat allocate the port "hdmi1 or coax 1" then return. If it is a dvd click on dvd then allocate eg: "hdmi 2" then return.

Nov 16, 2008 | Onkyo TX-SR606 Receiver

Not finding what you are looking for?
Onkyo TX-SR606 Receiver Logo

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Dennis McCollum

Level 2 Expert

137 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...