Question about Garmin Streetpilot ColorMap GPS Receiver

Open Question

Street Pilot III

When the find screen comes up I cannot go to the left side to enter points of interest, addresses, or intersectionthe button when pressed on the center left will not let me is there a way to fix the problem

Posted by on

6 Suggested Answers

SOURCE: garmin street pilot III

Push the power button to turn it on then count to 5 then hit enter. Then count to 5 again then hit enter. Once there hit the power button with a real quick press. The power button is also the screen brightness button. Someone may have turned it all the way down. OR the back light could have gone out.

Posted on Jan 27, 2008

marcelbakker
  • 174 Answers

SOURCE: Garmin Street Pilot III map source data card not accessible

Garmin has issues with the newer (ROHS Compliant) cards, so If you recently bought this card get a replacement from garmin.
I had these issues too with a 256 MB, garmin replace the card with 2 128MB cards, worked fine after that.

Posted on Jul 28, 2008

SOURCE: Street Pilot start up problem

MIne did this mornig too!
What a coincidence.
I have no clue. I plug it into the power adapter and nothing. nada.
Whats up?

Posted on Sep 16, 2008

  • 10 Answers

SOURCE: I have a Garmin Street Pilot III color and have

Contact us at 1-888-427-6640

Posted on Jul 13, 2009

  • 12 Answers

SOURCE: Street Pilot c330 GPS won't let me input an address.

Click on tool icon on lower right corner. Touch Map icon. Touch
map Info icon in center of screen. Touch City Navigator North America NT v8 icon so that the box is checked. Then click on back until you reach "Where To?" screen. If "Touch City Nav..." box is not checked, then you cannot input state.

Posted on Jul 26, 2009

  • 504 Answers

SOURCE: Our Garmin Street Pilot will not charge. Do the

The batteries DO die after a time. They are not designed to be replaced by the user. If you believe your battery has died, you should contact Garmin.

Posted on Jan 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Gamin Nuvi can't unlock maps


Use a Garmin 1450


The Garmin Nuvi 1450 can be used while driving or walking.

While driving, use the Nuvi 1450 to create a route to your destination and get step-by-step directions, to hear the names of upcoming streets, to tell you when to change lanes and to find out the speed limits on unfamiliar streets.


As a pedestrian, you can have the Nuvi 1450 create a route for you that uses a mixture of walking and public transportation, such as the subway or bus system, if you have purchased cityXplorer maps for that area.


Tap "Where to?" to set up a route. The "Where to?" icon is a large magnifying glass.


Tap "Addresses." The available categories are address, points of interest, go home, recently found, favorites and intersections.


Input the name of the state or county, if it is out of town.

Then tap "Spell city." Spell out the name of the city using the pop up keyboard.

Press "Done."


Enter the address number and press "Done."

Then enter the street name and press "Done."


The "Go" screen opens automatically.

Tap the green "Go" button. The Nuvi 1450 will now calculate a route to the address.

Follow the voice prompts and map highlight to your destination.


Navigate Using Coordinates


Tap "Where to?" and then tap "Coordinates."

Tap the coordinate you want to adjust/input a new coordinate.


Tap "Format" to choose the right coordinate format for the map you are using.


Enter the coordinates. Tap "Next."


Tap the green "Go" button to calculate a route.


Use the Map Page


Navigate to your destination by following the voice prompts, highlighted route on the map and directions located at the top of the map screen.
Tap the "turn" icon located in the upper left corner of the screen to see the next turn. It may have a turning or straight arrow and the number of miles until the turn. Tap the bar across the top with the next direction listed on it to see a list of all directions.

Tap the plus or minus signs on the right side of the screen to zoom in or out.


Press the spinning arrow in the lower left corner of the screen to return to the main menu.

Tap the "car" icon traveling along the highlighted route to enter the "Where Am I?" screen and get your exact location, coordinates and nearby emergency services.


Hope this helps

Oct 29, 2012 | Garmin Nuvi 1450 GPS Standard Red LED Wall...

3 Answers

I bought Garmin nuvi 765T after having Viamichelin navigator in my car fo some years. . In the old GPS I could navigate to "city center" which was quite useful, when you travel and want to visit a place...


Check in the settings/setup options to enable all the POIs (Point of Interests) and then check if you can find the "city centers" If not then maybe the maps of this GPS device does not have this POI.

Aug 10, 2009 | Garmin GPS Devices

1 Answer

My streetpilot c330 won"t shut off.


IT'S CALLED A FROZEN SCREEN...

2 OPTIONS

ONE, RESET IT !!! (See resetting instructions below)

TWO, let the battery die out!

Waking up your c330...

If you left your Garmin c330 on running the battery will have 1% life left. If you turn c330 back on again, it will flash screen for 3 seconds then die, even charging it at this point will not wake it back up. TO BRING IT BACK TO LIFE... plug in the power home or car into Garmin c330. There is a tab in the front Garmin gray frame of your screen. You must take like your fingernails and under the logo "GARMIN" pull the whole gray plastic frame off. Underneath the plastic frame to the right hand side. There is a "RESET" button. Make sure power is plugged in while hitting reset. Your battery should come back to life. Cheers

Mar 12, 2009 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Touch screen dos not work on garmin GPS street pilot 7200


Try resetting the unit by using a ball point pen or other sharp thing and press it for more than 10 seconds. It would be on the left/right/back side of your unit.

Also, try to hold your finger on the power key for approximately 15 seconds until you see a message "This operation will erase all waypoints, do you want to continue?"

Tap yes and the unit should reboot then attempt to acquire satellites. You will lose any favorites you have saved but it may save you a trip to the factory.

Please ask for further clarifications.

Please rate this solution as FixYa if found useful.

Thanks
Rylee

Mar 08, 2009 | GPS Devices

1 Answer

Street pilot c330


It took a nap...

Waking up your c330...

If you left your Garmin c330 on running the battery will have 1% life left. If you turn c330 back on again, it will flash screen for 3 seconds then die, even charging it at this point will not wake it back up. TO BRING IT BACK TO LIFE... plug in the power home or car into Garmin c330. There is a tab in the front Garmin gray frame of your screen. You must take like your fingernails and under the logo "GARMIN" pull the whole gray plastic frame off. Underneath the plastic frame to the right hand side. There is a "RESET" button. Make sure power is plugged in while hitting reset. Your battery should come back to life. Cheers

Feb 21, 2009 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Street pilot is dead


It took a nap...

Waking up your c330...

If you left your Garmin c330 on running the battery will have 1% life left. If you turn c330 back on again, it will flash screen for 3 seconds then die, even charging it at this point will not wake it back up. TO BRING IT BACK TO LIFE... plug in the power home or car into Garmin c330. There is a tab in the front Garmin gray frame of your screen. You must take like your fingernails and under the logo "GARMIN" pull the whole gray plastic frame off. Underneath the plastic frame to the right hand side. There is a "RESET" button. Make sure power is plugged in while hitting reset. Your battery should come back to life. Cheers

Aug 30, 2008 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Garmin street pilot c340 battery appeared low, used USB cable to hook up pilot with my computer but device doesn't appear to turn on, computer cannot locate device on Drivers, can I rechare steet pilot...


I followed the instructions of the Online manual for the Garmin Street Pilot c-340, I removed the faceplate of the Street Pilot and then using my thumb pressed down on the reset button. I then pressed the power on button on the side of the device- the screen lit up, I then plugged one end of the USB cable into my computer and the other end into the device. The information on the screen of the device indicated the Lithium Battery was charging properly.

Jul 14, 2008 | Garmin GPS Devices

1 Answer

Garmin freezes


2 OPTIONS

ONE, RESET IT !!! (See resetting instructions below)

TWO, let the battery die out!

Waking up your c330...

If you left your Garmin c330 on running the battery will have 1% life left. If you turn c330 back on again, it will flash screen for 3 seconds then die, even charging it at this point will not wake it back up. TO BRING IT BACK TO LIFE... plug in the power home or car into Garmin c330. There is a tab in the front Garmin gray frame of your screen. You must take like your fingernails and under the logo "GARMIN" pull the whole gray plastic frame off. Underneath the plastic frame to the right hand side. There is a "RESET" button. Make sure power is plugged in while hitting reset. Your battery should come back to life. Cheers

Jun 13, 2008 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Street name that is a number.


When you need to enter an address that is numerical such as the 52nd street, enter as normal until you reach the street name. At the bottom of the screen, you will see a button that says, "123." Press this button, then enter the number (52, in your case). Press done, and it should say something like, "52nd (Street, Ave, Etc.)" Press this button, and your address should show up. Please let me know if there is anything else I can do for you.

Mar 03, 2008 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Garmin street pilot III


Push the power button to turn it on then count to 5 then hit enter. Then count to 5 again then hit enter. Once there hit the power button with a real quick press. The power button is also the screen brightness button. Someone may have turned it all the way down. OR the back light could have gone out.

Aug 16, 2007 | Garmin StreetPilot 2610 GPS Receiver

Not finding what you are looking for?
Garmin Streetpilot ColorMap GPS Receiver Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Devices Experts

Tom Chichester

Level 3 Expert

24347 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Bill Gilhooly
Bill Gilhooly

Level 2 Expert

94 Answers

Are you a Garmin GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...