Question about Maytag Neptune MAH5500B Front Load Washer
Inner drum appears to be hitting outer drum creating loud noise and shaking of the washer. Polypropylene lip on inner drum is grooved. Washer is level and the load is not out of balance.
The rear bearing is bad the bearing is press in to the outer tub the outer tube is like a **** shell you need the rear half and new seals it is a big job if you are going to do it you will need a manul
Posted on Dec 02, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 03, 2015 | Washing Machines
Dec 26, 2012 | Kenmore Washing Machines
I'm sorry to say that tis
is potentially very bad news. the problem you describe is almost certainly
because the main bearing on the drum is worn out, allowing the inner drum to "flop about".
To test your bearings, open the door of the machine and by putting a little lifting pressure on the top of the inner drum, attempt to rock the stainless steel inner drum up and down.
The outer drum is mounted on springs and shock absorbers, so it will rock about (and it should do this) but the inner drum should not move up and down in relation to the outer drum. If the bearings are bad enough then symptoms will typically include:
A clonking noise as you lift and release the inner drum (this is the inner drum rattling on its bearings and or hitting the outer drum)
You will have become aware of the spin cycle becoming far noisier recently and possibly even a grinding crunching noise when the machine spins
The drum may feel like something is crunching or stopping you turning it when you spin it by hand with the door open
A leak from under the machine, which you will probably be able to trace to the back of the machine, coming from the centre of the drum. This is the result of the failing bearing allowing water to escape through the seal at the rear
Jul 07, 2011 | Maytag Washing Machines
Nov 17, 2010 | GE Washing Machines
May 22, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...
May 15, 2010 | Washing Machines
Oct 10, 2009 | Kenmore 42822 Front Load Washer
Oct 03, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Apr 05, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Dec 18, 2008 | GE WBSR3140DW Top Load Washer
435 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: