22" excalibur hedge trimmer has no spark and will not start

Search for:

Make Model parts diagram

FWIW, Sears is a possible source for what you need.

it is possible that you have not placed correctly around all the pulleys allowing it to be too loose. If you had included the vehicle and engine someone may be able to provide a diagram to help you.

There was a dual overhead cam so I'm guessing that's the engine you are talking about The other 3.0 liter engine wasn't an overhead cam engine. I went on to be on the safe side and provided belt diagrams for both engines because they were different. The first picture and description of which pulley is which is for the DOHC 3.0L engine which is what I'm guessing you have. The second set of pictures/descriptions is for the other 3.0L engine. Hope this helps....

I might be able to do that IF i knew what year, make, model, and engine size of the vehicle you have?

I'm not sure which timing belt "diagram" you are requesting. There are several in the service manual. (You are going to need much more than a simple routing diagram showing where the timing marks are located.) Replacing the timing belt on this engine is quite complicated and requires the use of special tools to lock both the camshafts and the crankshaft into position while positioning the timing belt.

Failure to do this according to the specific instructions provided in the sevice manual or attempting to do this job without the proper tools and equipment can result in severe engine damage.

If you really want to try and attempt this job at home, I can provide a FULL set of instructions and all of the diagrams available.

Just click on my profile picture below and go to my FixYa profile page. Click the tab that says "Pro Services". When the page opens up, click any of the services listed. (It doesn;t really matter which one - they will ALL connect you with me) Sign up for Email support. Be sure to include the Year, Make, Model, Engine Size, and a brief description of what we are trying to fix in your message (just so I don't mix you up with someone else).

It is ABSOLUTELY IMPOSSIBLE to provide you with such a diagram unless you bother to tell someone what vehicle you are working on. YEAR, MAKE, MODEL, ENGINE SIZE

Well, there are actually two different 3.0L engines used in a 2003 Mercury Sable. One is an Overhead-Valve (OHV) type engine. The other is a Dual Overhead Cam (DOHC) 24-valve engine. You can tell the difference by just looking at the engine or by checking the 8th digit in your VIN. For the OHV engine the 8th digit of the VIN will be a "U" and the DOHC engine will be an "S".

This is important information when it comes to getting parts or information for your vehicle.

Anyway, I have provided belt routing diagrams below for BOTH of these engines.

Check is here can find someone: 1993_ford_f-super_duty_drive_belt_routing_diagram

Hope hlpes (remember comment and rate this).

2002 FORD ESCAPE - L4 2.0L 1989cc 122ci GAS FI N B
Belt Routing Diagram - Alt., P.S. & Comp.





2002 FORD ESCAPE - V6 3.0L 182ci GAS FI N 1
Belt Routing Diagram - Multiple Accessory




Hope helped (remember rated this).

hello, my name is paul and wondering if you can help me with a wiring diagram of cool talk throat mic icom earpiece, hope to hear from you soon .


kind regards

paul