Question about Uniden Lands Phones

3 Answers

UnidenSeries DECT3080 The message alert light is flashing continuouly even though there are no messages. This is happening on all three phones. When there is a message the flash and beep occur to alert to a message. Once the message or messages are retrieved the beeping stops yet the flashing of the light continues, does not turn off. This has just occurred in last week. I have tried to unplug the phones and leave off for a period of time. When the phones are replugged this problem comes back almost immediately with no beeping.

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 306 Answers

U jus cear messages from ur base unit and alert would continue to flash. so go to  internet message center and u can find a few old messages there. After clearing them my alert light went out and stayed off. Disable messages to internet inbox and now it wil  flash only when u get messages to the base unit until u listen or clear them.

Posted on Dec 15, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 734 Answers

Will you tryed to reset.
Thanks

Posted on Dec 15, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,239 Answers

HI press and hold down [find hs] on the base for five seconds

Posted on Dec 02, 2008

  • ABHISHEK.C
    ABHISHEK.C Dec 02, 2008

     I found a solution: Press down the "find handset" button until the paging beep stops (about 5 seconds) and this will reset the indicator lights on the handsets.




    ... That should be the "find handset" button on the BASE UNIT of your Uniden phones.

    PLEASE RATE IT.....

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red message alert light keeps blinking even though there are no new messages to be listened to - how do we cancel this?


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Jun 16, 2011 | Uniden Cordless Phone

2 Answers

Every time I get a text message it alerts me by saying "Message from _____" and then the name of the person. I want to silent this feature but I cannot find the feature to do that.


What kind of vacuum is this anyway???

I will try to help you with your problem even though you have not identified your make and model phone and you are in the wrong category. I will try to help you by telling you what I would do with my phone to change this setting. The procedure for changing your phone is probably different ... but perhaps you will get some insight from my remarks.

This is for calls and messages - My phone is a **** style LG. On the left side there are two buttons. I press the bottom one to get a menu list. Next I press the Right Soft Key called 'settings'. Next I select item number 6 called "call alert" I press OK. My three options are ( ) ring only or ( ) Caller ID and Ring ( ) Name Repeat.

I use (>) caller ID + ring and I hear the number or the name of the caller if in my phone book then the ring I have selected for that caller or texter.

Specific for messages ... I select Settings & Tools then I select Sound Settings then I select Alert Sounds then I select Test Messages and then I make my setting.

I hope this assists you with your settings even though I feel you probably dont have the same phone as I.

Thanks for your interest in FixYa.com

Sep 29, 2010 | Vacuums

1 Answer

Can't get flashing red light to shut off for voicemail alert, even though there are no messages


That depends on your service provider. If they give you Voicemail then you should be able to shut it. If they dont then it wont shut off.

Jul 15, 2009 | Uniden Cordless Phone

1 Answer

Can't delete messages


You can use the manual for the DECT3080-2, the only difference is that you have 1 more handset. Here is a link to the manual on line.

http://uniden.com/pdf/DECT3080-2om.pdf

Mar 03, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Light won't turn off phone flashing


I hope this will help. I had the same problem with the message alert light not turning off. I have phone service through the internet. I would clear messages from my base unit and alert would continue to flash. I went into my internet message center and found a few old messages there. Why they got there is beyond me, but after clearing them my alert light went out and stayed off. I disabled messages to internet inbox and now it flashes only when I get messages to my base unit until I listen or clear them. Easy fix to annoyance I've had for some time.

Nov 19, 2008 | Uniden TRU9480 Cordless Telephone

1 Answer

Yahoo im


You can check the Yahoo IM preferences, enable sound alerts for different events.
Navigate to Messenger Menu---> Preferences---->By default, yahoo alert for an instant message is just a small popup sound which can hardly be heard.You may also enable message flashing so that the messages you receive keep on flashing till you read them. You can also change the default sounds for all the events though.

thx



Oct 08, 2008 | Microsoft Windows Vista Ultimate Edition

1 Answer

Message display


In the even your new voice message alert flashing gets out of sync with your phone company's voice messaging system, you can reset it bact to the original "no messages waiting", non-flashing state. To do this, with the phone in the standby mode and in its cradle, press and hold find hs (find handset) on the base until the paging sound stops (about 5 seconds). The flashing will stop.

Apr 19, 2008 | Uniden 5.8GHz Expandable Cordless Phone...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5186 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...