Question about Lexmark Printers & Copiers

5 Answers

Have an older X6150 All in One printer,scaner and Fax. Have converted from Windows XP to Windows Vista. Have downloaded the driver update and it reconizes the X6150 however, I cant load the software because the installation software CD doesn't work with vista. Can you help. Thanks, Joe Vallenari

Posted by on

  • jvallenari Dec 03, 2008

    Can't find my printer X6250 in the link instructions. What do I do noe?

  • jvallenari Dec 03, 2008

    The solution didn't work. Don't need to download the driver. I need to load the software that came on the CD with the printer.

×

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexmark Master
  • 1,879 Answers

The installation CD that came with the unit runs on XP

just visit the manufacturers website (support.lexmark.com) for updated drivers

Posted on Dec 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 300 Answers

Hello,
If you dont have the manufacturer CD, you should be able to get the drivers here. Just enter x6150 in the Search by printer model field and press Enter. Click the Download Driver link and choose your operating system in the Select Windows field.

Then on the next page, choose the Download Now link on the right. On the next page you may see a yellow security banner at the top of the browser. If so, click it and choose Download File. After that, choose Save to start the download. After the download completes you can double click the file to start the installation.

Hope this helps. Please remember to rate this information.

Thanks

Posted on Dec 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Only simple driver of Vista is available for Lexmark X6150 and All-in-One Center doesn't support Vista.

Posted on Dec 02, 2008

  • Shahid Electronics
    Shahid Electronics Dec 03, 2008

    So far only driver support for Vista is available for X6150 printer.
    Further software support is still awaited from Lexmark.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

It is available online i will send you the link

click the link given below

lexmark driver link


Follow the instruction there to download the driver

Posted on Dec 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexmark Master
  • 19,396 Answers

If you download the software from the Internet you will not need the CD.

Download the software for your printer from How to install a Lexmark printer when the.

Posted on Dec 02, 2008

  • 1 more comment 
  • Ginko
    Ginko Dec 02, 2008

    If you do not have the disk you must download the software from Internet, follow instructions below,



    Click here:Official Lexmark Drivers and Software



    A web page will open, follow instructions, select model, select operative system etc., and click on download .


    Chose to download the file in my documents when asked.


    After downloading, find the file,double click on the file ,then if
    you get in troubles, follow
    the instructions below to reset and reinstall drivers:







    • Unplug printer USB.

    • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.

    • Download driver from website, or use the disk and run the install file.

    • Follow driver installation wizard.

    • Plug back printer when prompted from installation wizard.


    Note:some
    printerdoes not work on Vista, if you do not find any driver download
    for Vista on your model page, that means your model is not Vista
    compatible.



  • Ginko
    Ginko Dec 02, 2008

    To download the driver, go to lexmark website, put your model, select vista, and download the file called >

    cjrX6100EN.exe
    , run the file with printer USB unplugged after you finish downloading, and follow the installer program instructions.

  • Ginko
    Ginko Dec 03, 2008



    If you have an older X6150, the files on CD will not work on Vista.

    Your last comment: "The solution didn't work. Don't need to download the driver. I need to load the software that came on the CD with the printer."

    Does not make any sense.

    As suggested you need to download software to install the printer, it is the only way out, since the cd contains software for XP, and is not compatible.

    To download the driver, go to lexmark website, put your model, select vista, and download the file called >

    cjrX6100EN.exe
    , run the file with printer USB unplugged after you finish downloading, and follow the installer program instructions.



    Click here:Official Lexmark Drivers and Software

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Purchased Estudio 166 toshisha Printer/Scaner/Fax And Have a Driver Cd Pakagage but compatible with windows Xp/Vista but the issue computer runs on Windows 7 therefore I cannot print nor Scan


Toshiba e-Studio 166 drivers are available Toshiba Official Support
Click 'Support & Drivers'
Choose B/W Copiers
Choose e-Studio 166
Select the complete drivers, which are compatible with Windows 7

Good Luck!
Appreciate generously if the solution could have been of any help!
CreativeTECH

Dec 22, 2010 | Toshiba e-Studio 282 Printer

1 Answer

Where can I find drivers for windows 7? many thanks avio


The Lexmark X6150 printer is not compatible with Windows 7 OS. However, this printer will work with Windows Vista and Windows XP computer. Here's the link for the driver - http://bit.ly/d43qMR.

Aug 17, 2010 | Lexmark X6150 All-In-One InkJet Printer

2 Answers

I want driver for windows 7


It seems that Toshiba's latest driver for this device supports only Windows XP and Vista 32-bit.

Here are the links:
1. Scan/Print Driver, Win 2000/XP v2.30
2. Scan/Print Driver for Vista 32 bit
3. Button Manager for Vista 32 bit

Manufacturers usually drop support for older devices after some time. Specially for printers and scanners the support is even more limited; most of them (if not all of them) offer warranty of one year.

Your best shot is to try the Vista drivers. For printing you shouldn't have problems. When you install the printer Windows have generic drivers for supported (current/older) devices. This driver should work for printing.

For scanning you can try something like VueScan which is compatible with Windows 7. Toshiba devices are not in their list of compatible scanners, but you can never know...
Note that VueScan only works with SCSI, USB and Firewire connections, most wireless Canon and HP scanners (on Windows and Mac OS X only) and doesn't work with parallel-port connections.

This can be solved with a parallel to USB cable converter (be sure to check whether you need male or female parallel to male or female USB converter).

I hope this answers your request.

Nakis

Feb 16, 2010 | Toshiba e-STUDIO 120 Laser Printer

3 Answers

My dell 922 aio was functioning properly when I had windows XP, now that I have Vista, only the printer portion will work and not the scanner or fax. Do I need updated drivers?


Yes,

Here is the web page to download:

Dell 922 Vista

I would Save the files to your computer and install them from there and not Run them from the download page.

Thanks for using Fixya.

NOTE: Uninstall the previous software before installing the new driver.

Jul 08, 2009 | Dell 922 All-In-One InkJet Printer

1 Answer

Have lexmark x6150,,,,,,,need driver download for vista


Hey,

The lexmark drivers and software required for installing the printer is available at www.lexmark.com

Select Drivers & downloads then driver finder.

Type in your model x2350 for example

Select your windows version

Download the setup program.

1.Download software
2.Run the downloaded setup
3.Plugin the printer when asked
4.Done

Thanks,
Ekse

Jan 27, 2009 | Lexmark X6150 All-In-One InkJet Printer

1 Answer

Download problem


Are you using the correct drivers for Vista? You can d/l the right ones direct from Lexmark at
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:279:0:0

Please repost if this helps,
MM85

Jul 27, 2008 | Lexmark X6150 All-In-One InkJet Printer

2 Answers

LEXMARK X1180 ALL INONE PRINTER SCANER


Your best bet would be to visit Lexmark's website to see if your printer is compatible with Vista. You may be able to download updated drivers for your printer, or they may be able to suggest alternate drivers which may allow you to use your printer with Vista.

Feb 20, 2008 | Lexmark JetPrinter X1185 All-In-One InkJet

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...