Question about Pioneer AVIC-D3 Car DVD Player

1 Answer

AVIC D2 Pioneer

Touch screen callibration

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to the main screen and hold down the menu button and that should start a new screen. that would let you fix it

Posted on Mar 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 AVIC-D2 - navtraffic - pioneer. The right side of the touch screen does not respond to touch. The letters to the right of the screen when putting in an address, state etc do not respond to...


contact pioneer at 1-800-746-6337 for a authorized repair facility. I seen this problem on some unit's and needed to send them out for repair. i believe it was a $150 flat rate for repair

Jun 13, 2010 | Pioneer AVIC-D2 DVD Nav/6.5"...

1 Answer

Avic-d2 question


sometimes i notice the touch screen calibration is a little bit off...Try to push the okay button a little bit to the left or right working your way from the okay button to the edge of the screen

Jun 07, 2010 | Pioneer AVIC-D2 DVD Nav/6.5"...

1 Answer

My screen is black but the tabs still work how do i fix it?


the picture tube of your pioneer AVIC D2 DVD check and repair adjust light or color.

Jul 22, 2009 | Pioneer AVIC-D2 DVD Nav/6.5"...

1 Answer

Don't know how to set the clock on the Pioneer AVIC-D2 head unit


drop by your local car stereo dealer and ask them NICELY to reprogram the time for you...then, a NICE person would but the guy lunch, what $10?
Good Luck

Jun 15, 2009 | Pioneer AVIC-D2 In-dash Car Audio Stereo...

1 Answer

Pioneer avic d2 touch screen issue


my touch screen is working but there is no picture

Dec 12, 2008 | Pioneer AVIC-D2 DVD Nav/6.5"...

1 Answer

Update dvd


type this on ebay, is way cheaper than pioneer websitePIONEER AVIC CNDV-80MT 2008 GPS MAP DVD

Aug 16, 2008 | Pioneer AVIC-D2 DVD Nav/6.5"...

1 Answer

GPS touch screen not working


This works!!!! This saved me $200.00 I am eternally thankful! the key to it is pressing the little reset button. it is very small and only accessable with a pen. If you follow the directions as listed, it will work. I've been born agan for fixya!

Jul 30, 2008 | Pioneer AVIC-D2 DVD Nav/6.5"...

1 Answer

Some buttons don't work


Pioneer AVIC-D1 Touch Screen Recalibration

If your pioneer AVIC car navigation unit does not register your touches or the wrong button is “pressed”, you need to re-calibrate your screen’s digitizer.

1-Hold the Eject button down until the face of the unit drops all the way
2-Using a pen hold down the reset button (just above the joystick) and the navigation disc eject simultaneously.
3-Release the reset button.
4-Release the dvd eject button next. The display will read “press reset”
5-Push the joystick up two times.
6-Push the joystick down twice.
7-Press the joystick in.
8-The service menu will appear after a short pause. You can navigate the service menu using the joystick.
9-Chose the first menu option and press in on the joystick.
10-Trace the screen with a stylus.
11-"P.ADJ" is the back button
12-Chose the second menu item in order to calibrate the touch screen. Use a stylus again and tap the "+" sign on the screen. (You may have to touch slightly off center if the digitizer is damaged. In which case things will still be off but it will be much better.)

Jul 27, 2008 | Pioneer AVIC-D2 In-dash Car Audio Stereo...

Not finding what you are looking for?
Pioneer AVIC-D3 Car DVD Player Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Video Players Experts

The Knight
The Knight

Level 3 Expert

68368 Answers

Craig Sagar

Level 1 Expert

11 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Are you a Pioneer Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...