Question about Toshiba e-STUDIO 6CP Laser Printer

2 Answers

Service error I had my printer serviced by a local company. The tech was supposed to call me back with a code to unlock this message that my printer is now reading: 933 Service printhead error. Does anyone know the code or how to get around this or fix?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers
Re: Service error
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers
Re: Service error

By printhead Lexmark is talking about the Scanner Assembly. Either one of the wires going from the scanner assy. has become loose or your scanner is failing. Try reseating the wires at the scanner assy. (Just under the top cover). Also follow these wires to the engine board and/or system board and reseat them on that end also. Hope this helps.

Posted on Nov 04, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Canon Image Runner 3800

These guys have the service manual for (sorry couldn't find a free one) $7.99; In this it details how to get into the service mode, when you should get a list of other error codes. The most likely is an E 411, which usually indicates the problem is with the document feeder tray/it's sensors, but see what you get. Please post back with what error details you get, and we can hopefully help if the service manual is not clear on the solution. The E0000000000etc message just means that there is an error considered too difficult for us consumers to deal with. Hopefully not. Hope this helps - waiting for your info :)

Jul 21, 2007 | Canon imageRUNNER 2800 All-In-One Laser...

2 Answers

What is the Xerox Phaser 8400 printer error code 07.010.43:43923? Much appreciated. Thank you.

Try this:

The printer has encountered an error state without the benefit of a code. Turn the printer off for 30 seconds, then power back on.
If the Printer Error message returns, press the i button on the printer's front panel. The actual error or fault number should be displayed. Note the error or message and search the knowledge base for the error.


Based on the problem description provided, we have determined that your printer needs service.
Please turn your printer off and use one of the methods below to make arrangements for service:
If using the local service provider website, please perform the following steps:

  1. Enter your zip code in the space provided.

  2. Choose a mileage distance. The search will locate a Service Provider within the specified range if available.

  3. Click Go. The web site will return a list of Authorized Service Providers (ASP) with their company name, address, phone number, and fax number.

Feb 12, 2011 | Xerox Phaser 8400 Laser Printer

1 Answer

I have fetal error code 08H,14H &15H in KONICA MINOLTA Magicolor 2430DL. pl help to resolve the problem

 When fatal error codes are displayed call tech support at Konica Minolta:

An error has been detected with the item indicated "XX" in the service message.
Reboot the printer. This often clears the service message, and printer operation can resume.
If the problem persists, contact Technical Support

Jul 14, 2010 | Konica Minolta magicolor 2430 DL Laser...

2 Answers

Ricoh Aficio AP 2600 laser printer there is a code SC-322

On most Ricoh models, SC-322 is a problem with the laser unit. If you have a service contract, have your technician take a look at the printer. Otherwise, you can either have a local Ricoh tech give you a repair estimate or buy a new printer.

On rare occasions you can turn the printer off and turn it back on and the code will be cleared, but most of the time this is a serious error that requires a service technician.

Apr 28, 2010 | Ricoh Aficio AP2600 Laser Printer

1 Answer

"Error 1068 Could not start the Printer Spooler on local Computer"

I appreciate the opportunity to help you. Try the following:

Check dependency services on Print Spooler
1.Click "Start", input "services.msc" (without quotation marks) to Start Search bar and press "Enter".
2.Double click the “Print Spooler” service.
3.Choose “Dependencies” Tab and remember the services name.
4.In the service list window, find the dependency services and try to start them.
5.Please try to start the “Print Spooler” service again.

See if this helps. If it does, please fill in the rating of my service to you. Thanks for using

Jan 27, 2009 | Printers & Copiers

1 Answer

Konica 7020 copier

35-9 is a low temperature error in the fuser.If the fuser has a problem it will not make a copy period.Sorry. Mrbonz

Jul 20, 2008 | Printers & Copiers

2 Answers

5020i error code E000001-0000

turn on the copier and quickly press * (with the little head around it) then 2 and 8 at the same time, then the * again... this should put you in service mode. now press copier >funtcion>clear>err>ok. now turn the copier off and back on, If the code comes back call your service local service tech.

Jan 08, 2008 | Canon imageRUNNER 5020 Copier

2 Answers

Error message

Canon has a decent trouble shooting guide for this model: Click on the Step-by-Step Troubleshooting link under Tech Support Unfortunately for this error code, all it says is this: Turn the machine off, and remove the power plug from the outlet. About ten minutes later, plug it in again, and turn the machine on. If the problem is not resolved, the machine may require servicing. Please contact your local Service Center.

Sep 14, 2006 | Canon Pixma MP500 All-In-One InkJet...

Not finding what you are looking for?
Toshiba e-STUDIO 6CP Laser Printer Logo

657 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Printers & Copiers Experts

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Michel Smith

Level 3 Expert

1218 Answers


Level 3 Expert

1113 Answers

Are you a Toshiba Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides