Question about Toshiba 27AF41 27" TV

1 Answer

Yellow image The Tv color is basicly yellow instead of white. We have green tint but no blues.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,284 Answers
Re: Yellow image

Could be many things that cause a loss of blue, CRT, Video output IC, driver transistors, etc..

Posted on Feb 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sony Trinitron's colors have turned green yellow

Only yellow color denotes the absence of Blue color. Check it. Check its video output card for any loose solder terminals at the blue color output section circuits.

Jan 12, 2013 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Have a akai tv that's has a green or yellow tint

Check the picture tube base card for any loose solderings. Your TV lacks Blue colour putput. Check all the solder points on this board. Resolder all the susepected solder terminals [especially take care to blue output section], by applying a little more solder. Check the base connection solder terminals of the blue output transistor. It might be loose, or transistor is defective.

Mar 29, 2012 | Akai Standard (CRT) Televisions

1 Answer

How do i connect a Blu-ray player to my TV

It should connect best to the one with blue,green,red and then the two for sound--red and white---This is component hookup.

once connected you select the input via the remote or menu..

The ones with the yellow, white and red are composite (yellow is video and color and red/white are audio---doubt it will work off blue ray unless similar outputs on that.

Mar 19, 2012 | Toshiba 36A60 36" TV

1 Answer

Tv out of foucs

These procedures are from the owners manual, go into menu and then picture quality and then: Convergence The Convergence feature lets you adjust the TV’s three tubes. When the TV tubes’ images are precisely aligned, they create the color images you see on the screen. Over time, the picture can drift out of alignment (this is normal). If your picture seems fuzzy or has a yellow tint, using Convergence could correct this misalignment. Only one convergence is needed for all inputs, regardless of the signal format. Note: Make sure the TV has been on for at least 30 minutes (TV needs to warm up for best results) before starting Auto Converge or Red/Blue Centering. When you select the Convergence feature, a submenu appears with three options: Auto Converge Automatically aligns the projection lenses to self-correct color images. You’ll see flashing squares of color dance across the screen (this is normal). Note: After performing auto convergence, use the Blue Centering and Red Centering menus to fine tune convergence in the center of the screen, if necessary. Blue Centering Aligns the blue and green images to fine-tune the picture. Red Centering Aligns the red and green images to fine-tune the picture. Note: The ability to change channels is disabled when adjusting the convergence options. The TV must be tuned to a usable signal to converge the picture.

Apr 23, 2010 | RCA HD52W58 52" TV

1 Answer

My tv sceen has a stain that makes anything white look yellow.

The color image is comprised of three colors, Red, Green, and Blue.
All the other colors are mixtures of those colors. The yellow picture indicates that your set is lacking sufficient blue drive.

First of all check to make sure that the tint control is not misadjusted.
The next thing is dependent upon the age of your television. If it's an older set that yellow tint is a sign of an aging picture tube.
If it's a newer set, less than 5 years old, have it analyzed by a electronics technician that is familiar with televisions if he is skilled enough he will know right away if it's the picture tube or not.

Apr 17, 2010 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

Not able to get red tones on TV

the problem is at the crt base .there r three red,blue n green o/put.verify if there is dry in the soldering n check the red cathode voltage it must b around 150 .if not then check the resistor that feeds the red o/ could b 12 to 15k. all crt have 3 driver color red blue n green,whenever one driver not working the color changes.that wat happened to ur tv now i do not know wat model u have.the drivers may b transistors or now its ic that r being used like tda of luck

Jan 03, 2010 | Toshiba 27AF45 27" TV

2 Answers

Only yellow,blue & green colors, occas hint of red. What are correct settings? middle of gauge,

sounds like degausing circuits bad. unplug for couple of hours. if this doesnt work try waving a heavy magnet in front of tv about 2-3 inches from screen.

Jun 01, 2009 | Philips Magnavox MT1905B 19" TV

1 Answer

Mitsubishi CS-40707 Greenish/Yellowish Display

Yeah, I had mine checked for the same thing. The "blue" - There's only three - red yellow blue- portion of your tube died. Not repairable. Last I checked it costs at least $1,000 for a new 40 inch tube. Good luck. Mine went to the garbage dump!

Feb 25, 2008 | Mitsubishi CS-40707 40" TV

1 Answer

Occasional discoloring, tv randomly turns from green tint to no tint

Loose connections in CTR board ( picture tube), resolder it.

Aug 05, 2007 | Insignia NS- 27" TV27 TV

Not finding what you are looking for?
Toshiba 27AF41 27" TV Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Standard (CRT) Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4718 Answers

Are you a Toshiba Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides