Question about Indesit W 123 Front Load Washer

1 Answer

Door gasket damaged

I need to replace the rubber gastket part of the door on a front loading Indesit WIA 101 washing machine (Italian model). The gasket was damaged and has a big slash right in the middle. As a result, the door leaks during washing. I cannot find a replacement part, ANYWHERE! I would be most grateful if you could please help me....

Posted by on

  • Anonymous Mar 21, 2014

    Bottom of front right door of shed damaged at right lower corner. Can I get a replacement door??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Indesit Master
  • 3,463 Answers

Have you sorted your problem out yet?
You can get any spares you need by going on line to:www.hotpoint.co.uk, and followning the links.
Good luck.

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the front door rubber gasket and seal ring?


Greg, new seal but need to know how to swap it out. Check the attached links,instruction and guides, If you want to google your make and model Washing Machine door seal replacement. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Replace Washing Machine Door Seal
How to replace washing machine door seal on Hotpoint washer
http://www.how-to-repair.com/help/how-to-replace-whirlpool-washing-machine-door-seal
How To Replace Front Load Washer Door Boot DIY

Jul 25, 2016 | Washing Machines

1 Answer

I have an indesit wia 101 front loader washing machine. At the moment it will not drain or spin & the red light flashes really quickly


HI,
Check back of washe with a flashlight for a bent or clogged drain hose. Do not move washer to check it. When you move it , it will straighten out and you will never know if it was bent
Also while it is pumping , pick up end of drain hose at drain and observe the volume of water being pumped.
If no water then the Pump may need replaced
Thank you for using fixya
Leo Ponder
Please rate me if this helped

Aug 12, 2011 | Indesit W 123 Front Load Washer

1 Answer

How to replace lg rubber gasket forn a front loading washing machine model wm0642


You will need 2 special tools to remove and install the door gaskets. The springs are very hard to put back together with anything other than the proper LG tools.
Good luck

Jun 04, 2011 | LG WM0642H Front Load

1 Answer

Changine a heating element on a washing machine Indesit WIA 101


Sam. The small nut and bolt which protrudes between the element ends should be loosened but not taken off. Press on the bolt, which will relax the compression on the rubber sealing block. This should allow you to extract the element. Once you have done this it will become clear..

Feb 20, 2010 | Washing Machines

1 Answer

Indesit WIA 121 not working - door latch not shutting


At first thought it was door lock mechanism was at fault but proved it to be ok - removed rubber 'boot' which on this model was on two stretchable spring retainers and checked operation of door lock.
Thought door hinges may have been bent so dismantled door, finding the problem to be the pin that the door latch pivots on had come out on one side so not lining up properly. This was easily pushed back into position.

Oct 05, 2009 | Indesit W 123 Front Load Washer

2 Answers

Indesit WIA 101 Machine wont start.No power


first check the fuse,if this is ok,you will require a main control board,this will require programing for you model and comercial code

Jul 25, 2009 | Indesit W 123 Front Load Washer

1 Answer

Indesit WIA 101


to open do power off after 5 min open the door with power off

Jul 27, 2008 | Indesit W 123 Front Load Washer

3 Answers

Washing machine door lock


undo clamp holding door gasket on cabinet and peel gasket back in the area of the door catch.

door lock is just held in by 2 screws from the outside and will come away when these are undone. on some models, there is also a small diameter pipe going to the door lock and take this off. note where wires go before removing them

Jun 25, 2008 | Hotpoint First Edition FEW12 Front Load...

2 Answers

Indesit WIA 121 washing machine, front loader. The door lock led is continuessly flashing red even when the programme has stopped and the door is opened. I have to switch off at the main plug. Machine is...


One of the main problems with Indesit front loaders ( apart from replacing the door interlock switch) is

If the door will not close and click in the lock, then take the door off with a tork screwdriver and take the screws of the inner plastic off the door (make sure you do this on a flat surface) and gently prize off the inner plasic by running round a flat head screwdriver..
Once you have taken off the door and glass bowel - check out the door catch to see if a metal rod has come out of its housing holding the catch and spring in place and refit or replace.
I have come across many door catches like this.

Apr 21, 2008 | Washing Machines

2 Answers

How can i open the door on my washing machine it wont open


Remove machine's upper cover and you will have an access to the door lock unit. Don't forget to disconnect the power cable first! Good luck!

Aug 01, 2007 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Indesit W 123 Front Load Washer Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

neilmoto

Level 2 Expert

75 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...