Question about Printers & Copiers

1 Answer

Language conversion how can change language through data cable, if it has required any software? yes,means where i will get and how much price will come.

Posted by on

  • syed inayathullah Dec 03, 2008

    I asked about canon GP200 and IR210 model machines, there is no language conversion option in service mode and custem settings.

  • syed inayathullah Dec 04, 2008

    you are telling about canon np4050 model and in this model we can"t change language through service mode as well as menu system.For this model we have to change EPROM.

    Once again, i am telling my model has GP200 and IR210.

    In canon this model was very familiar one ( HOPE U DONT MIND)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Printers & C... Master
  • 1,349 Answers

There should be a selection in the menu system, if not there then it is in service mode, depending on the language you put it on a certain number. ie: french -2, English-1, Spanish-3 etc. but you need the service manual to do so.

Posted on Dec 02, 2008

  • CheckitRight
    CheckitRight Dec 03, 2008

    There is no mention of any model on this post, maybe another one, but like I said it is in the Service mode and you need a service manual to do so ( I was a canon tech for 10 yrs).

    The service mode is inside the machine next to the green knob for the fuser roller, you will see a pinhole there you need to put a paper clip and push the switch which then brings up the service mode.

    You may be able to scroll and see if there is a copier settings. Good luck !!!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Bizhub c252 is displaying in a foreign language and I prefer English because I understand only English and it is also reading error code C-D370


To change the language
1 press the utility/counter button
2 touch user setting the top left button on the touchscreen
3 touch users choice the left button on the touchscreen
4 under the tab 1/6 the second button on the touchscreen is langauge selection touch this button and you can change the language
if you have recently changed the nv ram and this is what caused the language to change on the machine then post a follow up and i will post the instructions to change the language for this it is a different procedure.

Jan 15, 2015 | Konica Minolta bizhub C250 All-In-One...

1 Answer

How to change language on IP6600D


is it just the language which has changed or you see any error message on the lcd panel

To change the language settings press the up/down arrow key to select language selection and then press ok.
press the up/down arrow key to select language english and then press ok.
If you want you can reset all setting to default factory settings.
press the up/down arrow key to select reset settings and then press ok.
press the up/down arrow key to select yes and then press ok.
hope that it help

Feb 16, 2014 | Printers & Copiers

1 Answer

I did a reset on my 7210 officejet all in one. And now the display language are in a foreign language (i think japanese). Now how do i change the language back to english? Maybe you can instruct me a...


1. Press SETUP 2. Press 7 and then press 1 This select Preferences and then select Set Language & Country/Region Scroll through to English using the right arrow key > 3.Press OK 4.When prompted press 1 for yes. The country/region for the selected language appear. Press right arrow key > to scroll through the list 5. Use the keypad to enter the two digit number for the appropriate country/region. 6. When prompted, press 1 for yes You can print a Self Test Report to confirm the settings 1. Press SETUP 2. Press 2 and then press 6.

Jun 08, 2011 | HP Officejet 7210 All-In-One InkJet...

2 Answers

I can not set English on my 5400 it is stuck on German. How can I change the language to English?


Changing the Display Language
To change the display language, please execute the following steps:
Step Action 1 From the control panel, press Copy Mode. 2 Press pattlnk_10122006_1256-menu.jpg. 3 Press pattlnk_10122006_148-arrow_left.jpg or pattlnk_10122006_148-arrow_right.jpg repeatedly until Tools appears. Then press the pattlnk_10122006_148-okay2.jpg button.
4 Press pattlnk_10122006_148-arrow_left.jpg or pattlnk_10122006_148-arrow_right.jpg repeatedly until Device Setup appears. Then press pattlnk_10122006_148-okay2.jpg. 5 Press pattlnk_10122006_148-arrow_left.jpg or pattlnk_10122006_148-arrow_right.jpg repeatedly until Language appears. Then press the pattlnk_10122006_148-okay2.jpg button. 6 Press pattlnk_10122006_148-arrow_left.jpg or pattlnk_10122006_148-arrow_right.jpg repeatedly until the language required appears on the display. 7 Press pattlnk_10122006_148-okay2.jpg to save the change.

Jun 07, 2011 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

How do I change the language on my new J4580 machine


Hello

Thank you for using FixYa for your problem.

Try this;

Changing the language on the HP All-in-One displayFollow these steps to change the language on the All-in-One display.
  1. Press the Setup button (c01361401.gif).
  2. Use the arrow buttons (c01185108.jpgc01185072.jpg) to select Basic Settings, and then press OK.
  3. Use the arrow buttons (c01185108.jpgc01185072.jpg) to select Set Language, and then press OK.
  4. Use the arrow buttons (c01185108.jpgc01185072.jpg) to scroll through the language options until the preferred language is displayed.
  5. Press the numbers on the numeric keypad that correspond to the appropriate language displayed on the control panel display.
    NOTE: Ifa selection is not made within five seconds, the display automaticallychanges to show the next language. If a selection is not made withintwo minutes the setup menu exits and the language/region remainsunchanged.
  6. Confirm the language choice.
    • Press the number corresponding to Yes to confirm the selected language.
    • Press the number corresponding to No to select a different language.
  7. Aftera language is selected, a screen is displayed for region selection.Press the numbers on the numeric keypad that correspond to theappropriate region.
    NOTE: Ifa selection is not made within five seconds, the display automaticallychanges to show the next region. If a selection is not made within twominutes the setup menu exits and the language/region remains unchanged.
  8. Confirm the region choice.
    • Press the number corresponding to Yes to confirm the selected region.
    • Press the number corresponding to No to select a different region.

Please Rate my solution or reply for another answer if still not going

Thanks
Richard Scott
Technical Support

Nov 18, 2009 | HP OfficeJet J4580 All-In-One Laser...

3 Answers

D1460 PRINTER DRIVER FOR INSTALLATION WITH LAPTOP


Go to the following website, and click on the link for your operating system, it will take you to all the software you require
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=2510644&

Aug 05, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

Changing the language display on xerox n40 printer


IF YOU CANNOT READ RUSSIAN, THEN MAY I SUGGEST ADD AND REMOVE, DELETE SOFTWARE FOR THIS PRINTER AND THEN REINSTALLING THE SOFTWARE, IT SHOULD THEN ASK YOU WHAT LANGUAGE YOU REQUIRE.

Jun 16, 2009 | Xerox DocuPrint N40 Laser Printer

1 Answer

Language problem


right click on the task bar goto toolbars in that select language bar .then after getting that toolbar in ur taskbar by clicking on that u can select the required language from the displayed list

Nov 30, 2008 | HP LaserJet 3030 All-In-One Printer

1 Answer

Language problem


hai

to change the language follow these steps.

Usually, the language and country or region are set when you install the,

HP PSC. If you set the country/region or language incorrectly during.

installation, use the following procedure.

1. Press Setup.

2.Press 5, then press 5 again.

This selects Maintenance, and then selects Set Language & Country/
Region.

You are prompted with a list of languages. You can also scroll through
the languages using or .
3 Using the keypad, enter the two-digit number for the desired
language.
4 When prompted, press 1 for Yes or 2 for No.
You are prompted with all the countries/regions for the selected
language. You can also scroll through the countries/regions using
or .
5 Using the keypad, enter the two-digit number for the desired country/
region.
6 When prompted, press 1 for Yes or 2 for No.
7 You can confirm the language and country/region by printing a Self-
Test Report, as follows:
a. Press Setup.
b. Press 1, then press 5.
This selects Print Report, and then selects Self-Test Report.

Jul 27, 2008 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Change language


Here ya go:

What you will see
The printer display is not in the required language.
What to do
To change the language on the display back to the required language, do the following:

Steps Action 1 Power the printer off and back on. 2 Press the down arrow button (pattlnk_1012007_1117-downarrow.gif) four times. 3 Press the pattlnk_1012007_1045-selectbutton.gif button once. 4 Press pattlnk_1012007_1118-downarrow.gif once. 5 Press pattlnk_1012007_1045-selectbutton.gif once. 6 Press pattlnk_1012007_1118-downarrow.gif once. 7 Press the left arrow button (pattlnk_1012007_1117-leftarrow.gif) or right arrow button (pattlnk_1012007_1117-rightarrow.gif) until you see the desired language. 8 Press the return button (pattlnk_1012007_1121-returnbutton.gif). 9 Press pattlnk_1012007_1045-selectbutton.gif once to save the new setting.

Jan 08, 2008 | Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

old marine
old marine

Level 3 Expert

1472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...