Question about Modems

1 Answer

How to reinstall nero essentials 7

I remove my nero eseentials 7 in control panel because it does'nt function already... how to reinstall? i inserted my nero CD on drive D but drive D doest'nt functin... what shall i do?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 849 Answers

The drive or cd may be corrupted. check the cd to other computer if it works copy the setup files to your pen drive and install from there.

Posted on Dec 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error 797


This is usually because the wrong driver is installed for whatever reason.
To resolve this issue, remove the modem, and then restart the computer. When the computer restarts, Windows detects the modem and attempts to install the correct driver for it. To do this, follow these steps:
  1. Log on to the computer as administrator or as a member of the Administrators group.
  2. Click Start and then click Control Panel.
  3. Double-click Phone and Modem Options.
  4. Click the Modems tab.
  5. In the The following modems are installed list, click the modem that you want to remove, and then click Remove.
  6. Click Yes in response to the "Are you sure you want to remove the selected modem(s) from your system?" message.
  7. Restart the computer.
  8. The Found New Hardware Wizard starts. Follow the instructions in the wizard to reinstall the modem.

Jun 29, 2013 | D-Link Modems

1 Answer

I want to put a password at my lexmark printer could that be done.


The User guide has all the information you need to perform thsi action.
Setting Password Protect for the menus
Apply an administrative password to restrict unauthorized users from making changes to the MFP configuration from either the control panel or the Embedded Web Server (EWS).
1 Touch the Menus button on the home screen.
2 Touch Settings.
3 Touch the down arrow and then touch Security.
4 Touch the down arrow and then touch Create/Change Passwords --> Create/Change Advanced Password.
5 Enter and reenter a password of both alphabetic and non-alphabetic characters. The password must be a minimum of 8 characters.
6 Touch Submit.
7 Touch Settings --> Security --> Password Protect to view what configuration settings are protected by the
Advanced Password.
Note: Settings --> Security --> Password Protect and Settings --> Security --> Create/Change Passwords --> Create Change user Password can be used to restrict access with a different password than the Advanced Password. Use Settings --> Security --> Password Protect to select the menus that are accessible with both an Advanced Password and a User Password.
Note: The Advanced Password and the User Password protect the menus on the touch screen control panel of the MFP and the Configuration section of the EWS pages.


Restricting Function Access
The MFP supports a variety of methods for authenticating users prior to allowing access to functions.
1 Open a Web browser. In the address line, enter the IP address of the MFP being configured using this format:
http://ip_address/.
2 Click Configuration.
3 Under Other Settings, click Security.
d Select an authentication method.
e Click Submit.
4 Click on the setup link for the authentication method previously selected in step d.
a Fill out the appropriate information for the environment.
b Click Submit.
5 Click Function Access.
a Set the function authentication level for each function. Select Off to prevent anyone from using a function.
b Click Submit.


Preventing access to the menus from the control panel
It is possible to prevent access to all the menus using the control panel touch screen. To prevent access:
1 Touch the Menus button on the home screen.
2 Touch Settings.
3 Touch the down arrow.
4 Touch Security --> Function Access --> Menus --> Disabled.
5 Touch Submit.

Apr 16, 2013 | Lexmarkr X646E Multifunction Printer -...

1 Answer

Not working only power and dsl display is glowing continuously. BSNL personal informed that modem has to be repaired. It is the line probliem or modem problem.


It can be one of two things : A material defect or your modem or a configuration error (modem or PC). Since the DSL indicator is on, it is most likely the problem is not with the line. Except if you are getting the ADSL signal meant for somebody else.

Can you give more details about the modem you are using ? It might help to guide you in verifications to do.

In the meantime, try the following generic steps:

1. If your modem requires a driver:
  • Make sure you have the driver CD which came with the modem;
  • Then, go to the Control Panel, then "Add or remove programs" (or "Programs and functionality" depending on your windows version);
  • In there, search anything related to your modem (generally, it contains the brand or model of your modem) and unsintall of them;
  • Use the driver CD and reinstall the software for your modem and reconfigure it as per your ISP settings (call them if you don't know the settings)

2. If your modem requires a connection set up on the PC:
  • Go to Start -> Control Panel, then click on either (1) Network Connections or (2)Network and Internet Connections -> Network Connections (it depends on the View of the Control Panel);
  • From there, delete all dial up and/or broadband connections;
  • Then, still in Network Connections, click on Create a new connection, in the "Network Tasks" section on the left;
  • Reconfigure a new connection as per your ISP settings. Call their hotline if you have to, to get instructions on how to configure the new connection.

3. If your modem functions as a router:
  • It might have been reset to factory defaults and you may need to reconfigure it as per your ISP settings.

In all cases, do a hard reset of the modem before proceeding. Il will be as if you were installing it for the first time.

I hope this will come in handy. good luck with your modem.

May 11, 2011 | Modems

1 Answer

[How-To] Unlock Airtel DataCard Micromax MMX 610U With Universal ...


Hi gulzar_ah228,

If you wanted to insert any other operator sim card on your Micromax MMX 610U Airtel USB datacard you really need to unlock it. If you wanted to unlock the modem you will be needing a Software and guide to do the process. Please see the steps below on how to unlock Micromax MMX 610U USB Datacard:

1. First download the software here:
Universal Master Code Generator

2. After downloading install the software. Now you need to remove the Airtel SIM card from the modem.

3. Insert a different Operator Sim card.

4. Open the Universal Master Code Generator.

5. Please enter the Micromax MMX 610U IMEI number. You can locate the number on the card.

6. Once you already entered the security code, press calculate. On the left side you will get 2 codes the unlock code and flash code.

7. Connect the modem to your PC, wait until a screen pops up, it will requires you to enter the unlock code.
--> please use the unlock code that was generated in step 6.

Hope it helps.

Thank you for using FixYa.

Feb 17, 2011 | U.S. Robotics (SPORTSTER0484)...

1 Answer

NEW Pavilion Slimline & NEW HiRO V.92 56K External USB Data Fax Voice Modem Windows 7 Vista XP 32 64 bit. Installed drivers as per instructions. I can see drivers in device manager & under control...


SOP - Standard Operating Procedure for MS OS's (NT, 2k, 2k3, XP, Vista, Win7) - why load
drivers for devices that are not present. If you want to use the modem,
turn it on before powering up the PC.

Also please post the full version number of your driver. Not all of them are fully 7 compatible.

Jan 12, 2011 | Modems

1 Answer

Scanning the document


I'm confused? The listed product is a Fax/Modem, not an all-in-one. It doesn't have a scan function. To send a document via a fax, you will need to scan it with a scanner (separate hardware) and then fax it. In Windows 7, a program called Windows Fax and Scan is included. If the devices are installed with the correct drivers, you can do the two steps in one program. Open the program, click on New Fax. Select Insert > Pages from Scanner (only available if the scanner was on and connected when Fax and Scan was started). Scan the document; fill in the contact information for the receipient and send. The Contact information may take a few steps since it is a Windows Contact page.

I hope this helps.

Cindy Wells

Apr 09, 2010 | Hiro V.92 56K PCI DATA FAX VOICE MODEM...

1 Answer

Got dynalink V1456VQE modem need to install please help how to


internal modem installing:

1.Switch off the power,and remove the power card from the cpu.

2.Get the cpu separately.

3.unsqrew the sqrews and open the system box

4.you can find the white color slot in the mother board.

5.fix the modem with that slot (Modem Board has the single cutting).it must be fitted with the PCI slot.Slight press down.

6.then ON the system,
Start->all programs->control panel->system
->Hardware->Device Manager

now you can see more items on screen,also you can found the modem which you have installed.

Your new modem is ready to use...

7.If your modem came with cd,then insert the disc in cd/dvd drive .Gently Installed the cd...

8.Then Restart the computer.

Your new modem is ready to use...
---------------------------------------------------------------

External Modem Installing:(We do not need to open the system case)

Type 1:(Using Ethernet Cable)

1.Insert the ethernet cable(RJ 45) in the modem,and connect the other end of the cable to cpu.

2.insert a power adaptor in the modem jack.

3.insert the phone line in modem phone jack.(RJ 10)

4.On the system and Modem.

5.Your new modem is ready to use...
----------------------------------------------------------------------------

Type 2:(Using USB cable)

1.Insert the USB cable in CPU,and connect other end of the cable to modem .

2.insert a power adaptor in the modem jack.

3.insert the phone line in modem phone jack.(RJ 10)

4.On the system and Modem.

5.You must install the driver software cd came with your modem

6.Restart the computer

7..Your new modem is ready to use...

Feb 13, 2010 | Dynalink (V1456VQH) Modem

1 Answer

HP USB Modem does not break dial tone


If the information connected to your post is all correct (56k V90 usb), and you are using one line for both the internet and the fax, you should hang up from the internet before you try to dial out the fax.

You have not indicated your PC model, so I don't know what operating system you are using. For XP and newer versions, you have to set up and configure the fax using the wizard or configuration software. If you have not done that yet, you need to.

In xp, go to start, Programs , Accessories , Communication , Fax , and then click Fax Console.

You said your computer is new. Win 7 and Vista are much the same:

1.Click the Start button , click All Programs, and then click Windows Fax and Scan.

2.At the bottom of the left pane, click Fax, and then click New Fax on the toolbar to launch the Fax Setup wizard.

3.Click Connect to a fax modem and follow the instructions.


You also need to make sure that your fax/modem is correctly listed in the control panel. In XP, start, control panel, printers and devices. If you do not have a fax printer listed, you need to "install a local fax printer."

The installation wizard should work in both OS without much trouble. If you do have difficulty, Microsoft and adobe both have "virtual printers" you can use. Look in Microsoft office or online.

Also check control panel of 7 to make sure that your modem and fax are listed correctly. Thanks for using Fixya.


Jan 01, 2010 | HP (56K V90 USB) Modem

3 Answers

Cannot connect using LG internet cube software


I had the same problem but now i have found the solution for it. Its not the software its the phone. Go to your Phone Settings hit Connectivity and then Usb Connection select Data Service and now connect your phone to the pc and select connect in Mobilesync and it should work. After you are done using MOBILE SYNC you can simple go in settings once again and choose mass storage for any downloads!!!

Dec 17, 2007 | Modems

1 Answer

PC Laptop does not recognize the inserted modem in order to use the internet


yes..modems are tricky ..uninstall it let the puter find it then insert the software. if at any time u have to select a port for it u failed. it should automaticly select it. then after restart u go to control panel /modem/ and look to see if u have it there there/ next select properties/ modems/diagnistics/ query you should see alot jibbersh letters... then you know its working u might want to do the last first. CrazyLarry

Jun 27, 2007 | Hawking Data/Fax PN612 (PN612ES) Modem

Not finding what you are looking for?
Modems Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Modems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...