Question about Canon S200X Ink-Jet InkJet Printer

2 Answers

Service error 5600 appeared when the printer stop

The first two pages came out fine but after the third page, the ink started to fade and the following pages has no ink at all.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Canon Expert
  • 183 Answers

Dear budg,
Error code 5600 in S200 is No Print head Error indicator. In this case, the print head of the printer is faulty so that the printer cannot detect the print head. About the print out, please check if there is enough ink in ink tank to print. If there is enough ink to print, means this bad print out caused by the faulty print head. It seems that you to replace the print head.
Regards,

Posted on Dec 02, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 159 Answers

Further to above - Canon printers have separate ink tanks & heads .. this makes the replacement ink cheaper than the 'integrated' ink/head opposition HOWEVER if you turn off the 'low ink' warning (as you must to use replacement ink tanks or refills) you MUST visually check your ink levels before printing so as to be careful NEVER to let the ink run out ..

Why ? because the ink is used to cool the head jets .. no ink = burnt out heads ....

Posted on Dec 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a brother laser printer that prints one page fine, but subsequent pages fade to nothing. any solutions?


That sounds like maybe a printer cartridge problem. Perhaps the ink flow is not working properly.

Feb 21, 2018 | Brother Office Equipment & Supplies

1 Answer

C935 PS3 colours work, but the black fades gradually down the page. No errors on printer, toner at 50%


sounds like you have an air leak into the ink supply system, specifically on the Black ink drive.

Mar 14, 2014 | Lexmark Office Equipment & Supplies

1 Answer

Hp deskjet 5150 just replaced both inks...black



I have to ask this question of you, just to make sure this is not an issue. Are you using a factory new ink cartridge?
Please consider the following:
If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
If you are using factory new cartridges, then please call the manufacturers Technical Support for assistance with the warranty on the cartridges
Don

Dec 31, 2009 | HP DeskJet 5150 InkJet Printer

1 Answer

Scanner Test Page Prints Fine, Everything Else Prints Faded


have you changed your ink cartridges and seen a difference?

Dec 24, 2008 | Lexmark X2500 All-In-One Printer

3 Answers

Faded print on one side of page


I have a SCX-4100 Samsung, replaced the tonger cartridge, it was working fine for a few hundred sheets of printing, but after that, the left side of the page was printed very light, faded.
If I run the "Clean Drum", it will print a litter better, but still faded.
What can I do to correct this problem?
Thank you
TT

Nov 24, 2007 | Samsung ML 1710 Laser Printer

1 Answer

Doesn't print correctly


print a page of solid colour..but donot print the entired page..maybe a third without wasting ink.
these printers are pigs when it comes to their printerhead

Nov 10, 2007 | Epson Stylus CX5400 All-In-One InkJet...

1 Answer

Deteriorating Print Quality


This is Maltesecross. Turns out that the faintness of my printed pages was in fact due to a low ink cartridge, even though some pages printed out fine and others half-good. Eventually, all pages turned faint, and upon re-installing the driver, I got a low-ink warning (the first one ever). Putting in a new ink cartridge solved the problem for me.

Oct 21, 2007 | HP Photosmart C3180 All-In-One InkJet...

Not finding what you are looking for?
Canon S200X Ink-Jet InkJet Printer Logo

861 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2144 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...