Question about Televison & Video

1 Answer

Welkin DVD player; Can't get Key Lock Off without remote

I recently 'inherited' a Welkin T123 DVD player. The remote control was nowhere to be found.

There is a DVD in the machine and when I switch it on, the menu for the movie shows ok.

A message on the bottom left of screen says 'Key Lock On'.

None of the buttons on the machine respond; eject, stop, play, nothing works.

How do I get key lock off without a remote please?


Posted by on

  • 1 more comment 
  • markg99 Dec 02, 2008

    Thanks for posting. My ideal solution would not involve spending money on a universal remote. The machine itself is quite old and probably not worth spending too much on.

    I have tried all the combinations of buttons on the box I can think of. e.g. hold eject while power off/on. hold first button on the box while pressing each of the others in turn. hold second button on box, while pressing all others in turn etc.

    As you say, you can't have to use the remote, but does anyone know the way to unlock it without a remote?

    Thanks again for posting the helpful reply.


  • nick bishop Jan 06, 2009

    Yes we cant get key lock off but we do have remote is there a combination of buttons to press or should key lock button just do it cos it dont !!!!!

    Welkin t-123

  • nick bishop Jan 06, 2009

    welkin t-123 cant get key lock off we do have remote should we be pressing a combination of buttons ?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 76 Answers

You cant you have to use a remote you can get universal ones from woolworths. But make sure that its supports your dvd player look at the back of the packaging.

If you have any questions please dont hesitate to ask

Posted on Dec 02, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My welkin VCR/dvd compo model t569 my remote broke and I can't get the codes for a universal remote

0195 0338 0215 0485 0421 0163 0002 0616 0509 0472 0649
0508 0435 0654 0601 0166 0460 0338 0457.
Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.

Feb 16, 2014 | Televison & Video

1 Answer


Google the model number if you have a universal for "manual" Note that you are always better with an original as universals will not program for all models or have all the key features needed if do.

Jun 07, 2012 | Televison & Video

1 Answer

I have a remotec F-BW0930 and the code for AWA dvd players 00375 does not work, I have an AWA DP220, do you know the code?

I don't have other code for your DVD but I can give you the steps on how to program your remote to your DVD without the list of codes.

1. Turn on your DVD.
2. Press the DVD Mode Key.
3. Hold down SET on the URC for 2 seconds until the indicator lights up.
4. Enter 0005. The indicator should go out immediately.
5. Press the DVD Mode Key again as in step 2.
6. Hold down SET for 2 seconds until the indicator lights up and your URC is ready to start searching.
7. Aim the URC at your DVD, press the power key repeatedly, slowly until the DVD has been turned off. Once your DVD has been turned off, immediately press SET to lock in code and the indicator should go out.

Jun 13, 2010 | Universal Remote Control Remote Control

1 Answer

Inherited a flat screen tv without remote. cannot search for channels. dvd player is black and white with red, yellow, white cables. ugh.

You need to invest in a univeral controller. You can either order one onlne or go to a local store and purchase one. The controller instructions will give you the correct codes to access your TV controls. I don't understand your comment about black and white on the DVD player. Are you having problems hooking up the DVD to the TV? Most problems will be cleared up after you get a remote. If you need a user manual for the TV let me know the model number and we can find the correct source. Thanks.

Jan 02, 2010 | Philips Televison & Video

1 Answer

How to enter lock code into DVD player

You can get a copy of the manual at the attached website. Good Luck!

Apr 30, 2009 | kawasaki PVS1080

1 Answer

Unlock codes Insignia NS-8PDVD

You may have missed a step in the procedure try this one. This information was found on the following website It is dated as working on 01-08-08. I hope this information help you with your problem. 1.- Power on with no DVD inside the player; 2.- Press open on the DVD player; 3.- Press Menu button on DVD (or SETUP on remote control), (you see General Setup Page on the screen); 4.- Press the right key 3 times to select the Preference Page; 5.- On the remote control press 9653; 6.- Use the up and down key to select the Region, Select 0 for all regions; 7.- Press Enter. (This works with NS-7PDVD and NS-8PDVD)

Jan 16, 2009 | Insignia NS-8PDVD

1 Answer


iv got a users manual for this dvd player

Jan 15, 2009 | Yelo 800DVD DVD Player

1 Answer

I have a rca universal remote control also a cody dvd player.

Hi freeent316,

Unfortunately, the RCA 15-2104 does not have a code for Cody brand DVD players. The list of codes can be found at the following web address:

Since there is no published code for Cody brand devices, I recommend using the CODE SEARCH function. Here's how:

1) Turn on the DVD player
2) Press the DVD key on the remote
3) Hold down P until the red light blinks twice
4) Press 9-9-1 (the red light will then blink twice).
5) Slowly alternate between pressing the DVD key and the POWER key - when the device turns off, that means the remote has found a code for the DVD Player and should then operate it.

You can read the details about the CODE SEARCH feature in the user manual, which can be viewed at the following web address:

I hope this helps - please let me know if I can be of any further assistance.

Dec 11, 2008 | Radio Shack 15-2104 Remote Control

1 Answer

Memorex MVD 2042 DVD Player ''Key Lock on''

mt memorex dvd player says ``key lock on´´ and i don't know how to quit that and i can't opened with the remot control
Help please!!!!!

Nov 17, 2008 | Memorex MVD2037

3 Answers

Looking for DVD-1002 remote code

on the dvd player it should say what the make it is try looking on there website and buy the remote

Aug 12, 2007 | Durabrand DVD-1002 DVD Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

764 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74887 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5265 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides