Question about Projection Televisions

2 Answers

We are just getting a line on our rear projection tv. it is a celestial. can someone please help

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, if you are referring to a single line from left to right, then that would mean that:

  • vertical IC is defective;
  • vertical B+ supply is missing which could be an open resistor or a diode;
  • in some instances, it could be indicative of a loose connection or a cold solder.
Alternately, if you are installing a new TV system, post back specifics of what you want installed/hook up to what specific brand and model. It all depends on whether you have straight cable or a cable receiver/decoder box, or a satellite receiver, or a DVD player/recorder or a home theater system. It would also depend on whether you want HDMI (if capable), composite, component or S-video connection.

If the above solution has merit, pls click on my "Ask Me" to explore additional options, postback how things turned up or should you need additional information.

Good luck and Thank you for using FixYa.

Posted on Dec 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Projection T... Master
  • 6,487 Answers

Can you please provide us the complete brand and model of your television so we can help you better...

Posted on Dec 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Celestial lcd tv LT3200HD needs cold cap board wont turn on if its too cold it keeps turning off when room temp drops any help would be greatly welcome!


Replace the caps with 1000mf at 25 volt available at an electronics parts outlet.make sure you put them in correctly.the black line with a -(negative) goes back in the same way you took them out.

Sep 24, 2009 | Projection Televisions

1 Answer

Colored lines across TV



what this sounds like is that you may have a cable in the wrong part of the tv like maybe a vcr or audio cable check your inputs in the back of your tv that sounds like it what it might be i have a big screen tv and if i have a cable in the wrong part it will hiss and have lines on it too i hope this can help if not reply to me at Jonk3y @aol.com

Sep 23, 2009 | Toshiba 62HMX84 62" Rear Projection HDTV

1 Answer

Vertical lines appear on the screen.


It appears like there is a bad capacitor in the horizontal circuit. Try to put a fan near the ventilation trap, just for a test.
the part cost almost nothing but having someone to your house is expensive.
Your decision.

Jul 01, 2009 | JVC HD-61Z886 61" Rear Projection HDTV

1 Answer

My TV screen has 3D problem


you need to have someone replace the convergence IC's

Jul 27, 2008 | Zenith R57W46 57" Rear Projection...

1 Answer

White lines


i have same problem, i have 55 projection tv mitsubishi, i get those white lines. how can i fix the problem.?

thank you.

Mar 27, 2008 | Mitsubishi VS-55705 55" Rear Projection...

1 Answer

Converges problem for my RCA 52


Convergence amp ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
http://www.hdtvoice.com/voice/showthread.php?t=28929
Or send to ptscorp.com
http://www.hdtvoice.com/voice/index.php?s=

good luck
please mark the post with a fixya

Feb 08, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Triple Vision


One of your convergence output IC's has stopped working and needs to be replaced. This is a very common problem in projection TV's. The IC should be replaced and the convergence circuits realigned by someone with experience in repairing projection TV's.

Aug 04, 2007 | Samsung PCN5425R 54" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...