Question about Hauppauge WinTV HVR-1600 - ATSC HDTV receiver / analog TV tuner / video input ad (1181)

Open Question

Sparkle 980gt SLI. Not enough free resources

I have installed 2 Sarkle 9800gt's in Sli and the second card gives me the code 12 error that it cannot find enough free resources. I have used the SLI bridge from my previous sli installation(6600gt's) as i did not recieve a new bridge with my 9800gt's.

There is also a small plug on each card right next to the sli bridge, must this be plugged in?????

Please help

Posted by on

2 Suggested Answers

tom19511
  • 1601 Answers

SOURCE: "This device cannot find enough free resources that it can use. (Code 12)"

Two devices have been assigned the same I/O ports, the same interrupt, or the same Direct Memory Access channel (either by the BIOS, the operating system, or a combination of the two).

You can use Device Manager to determine where the conflict is and disable the conflicting device. On the General Properties tab of the device, click Troubleshoot to start the Troubleshooting Wizard.

Posted on Jan 11, 2008

frcs68
  • 1605 Answers

SOURCE: error code -12

go to control panel>> system>>hardware>> device manager.
double click on the netgear, go to resources tab, if there is conflict (it should). click on "change setting" select the memory range and the IRQ untill you see "no Conflicts" in the lower box.
close and exit. restart the machine.

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Added 1G memory, for a total of 2GB. the system still only sees 1G


If you installed total 4GB memory, the system will detect less than 4GB of total memory because of address space allocation for other critical functions, such as:

- System BIOS (including motherboard, add-on cards, etc..)
- Motherboards resources
- Memory mapped I/O
- configuration for AGP/PCI-Ex/PCI
- Other memory allocations for PCI devices

Different onboard devices and different add-on cards (devices) will result of different total memory size.
e.g. more PCI cards installed will require more memory resources, resulting of less memory free for other uses.

On a SLI system, since PCI-Ex graphic cards will occupy around 256MB, another 256MB will be occupied after you install a 2nd PCI-Ex graphic card. Hence, 2.75GB memory left only if two SLI cards installed on A8N-SLI Premium while 3.0GB memory left with one graphic card without other add-on devices.

This limitation applies to most chipsets & Microsoft Windows 32-bit version operating systems.

If you install Windows 32-bit version operating system, we recommend that you install less than 3GB of total memory. If more than 3GB memory is required for your system, then below two conditions must be met: 1. The memory controller which supports memory swap functionality is used. Chipsets later than Intel 975X, 955X, Nvidia NF4 SLI Intel Edition, Nvidia NF4 SLI X16, and AMD K8 CPU architecture support memory swap function. 2. Windows 64-bit OS which can address more than 4GB memory. You can check below URLs for reference:
http://dlsvr.asus.com/pub/ASUS/mb/4GB_Rev1.pdf
hope this helps

Apr 18, 2011 | ASUS P5RD2-VM Motherboard

1 Answer

When i installed the driver software my computer wont boot..


just check the Bios configuration

is you ned to change PCI to VGA or Same in to Bios setup and rebot the pc

Nov 02, 2010 | SPARKLE Computer Sparkle GeForce 8500GT,...

1 Answer

Need to install second video card


You can install a video card with a dual out feature, than you can run two monitors off the same PC if the video card, processor, and motherboard are "fast" enough to do this. Running 2 video cards can only be done on a motherboard that is SLI capable. ie. 2 PCI-e slots, and an SLI bridge.

Jul 01, 2009 | E-Machines T5212 PC Desktop

3 Answers

I want to use two Graphics card in single motherboard


Not on this motherboard, and not with two different video cards. Your motherboard does have two PCI-E slots at x1 speed, but only one slot at x16 speed. And when you use SLI you should use two identical video cards for best results.

Mar 20, 2009 | XFX NVIDIA GeForce 8500 Graphic Card

1 Answer

Install


This dependson your motherboard mate... the PCI port is the white one on ypur motherboard so all you need to do is line up the pins n just seat the card like a plug.. you might have to undo a backplate where the connector will go at the back of the tower.. screw the video card in n voila

Feb 12, 2009 | SPARKLE Computer Sparkle GeForce 8500 GT /...

1 Answer

Asus a8n sli premium


From the Asus support site.

If you installed total 4GB memory, the system will detect less than 4GB of total memory because of address space allocation for other critical functions, such as:

- System BIOS (including motherboard, add-on cards, etc..)
- Motherboards resources
- Memory mapped I/O
- configuration for AGP/PCI-Ex/PCI
- Other memory allocations for PCI devices

Different onboard devices and different add-on cards (devices) will result of different total memory size.
e.g. more PCI cards installed will require more memory resources, resulting of less memory free for other uses.

On a SLI system, since PCI-Ex graphic cards will occupy around 256MB, another 256MB will be occupied after you install a 2nd PCI-Ex graphic card. Hence, 2.75GB memory left only if two SLI cards installed on A8N-SLI Premium while 3.0GB memory left with one graphic card without other add-on devices.

This limitation applies to most chipsets & Microsoft Windows 32-bit version operating systems.

If you install Windows 32-bit version operating system, we recommend that you install less than 3GB of total memory. If more than 3GB memory is required for your system, then below two conditions must be met: 1. The memory controller which supports memory swap functionality is used. Chipsets later than Intel 975X, 955X, Nvidia NF4 SLI Intel Edition, Nvidia NF4 SLI X16, and AMD K8 CPU architecture support memory swap function. 2. Windows 64-bit OS which can address more than 4GB memory.

Jan 06, 2009 | ASUS A8N-SLI Deluxe Motherboard

1 Answer

Flight sim 2004 not happt with SLI configuration


Check page 2-19 section 2.5.6 of your manual. Also
Page 2-32
If this is all correct than swap known good card to second-PEG unsued slot. You could have a bad video card or SLI cable.

Dec 28, 2007 | ASUS A8N32-SLI Deluxe Motherboard

3 Answers

Vista ultimate - Second card doesn't have enough resources???


thats 64 bit for ya.. welcome to buggy driver "if they support (beta)it"..
chipset, then video driver.. also vista has UAC issues. right click install as admin. good luck (i dont like vistuh)

Nov 26, 2007 | ASUS M2N-E SLI (M2N-E SLI GREEN)...

Not finding what you are looking for?

Open Questions:

See all Hauppauge WinTV HVR-1600 - ATSC HDTV receiver / Questions

Hauppauge WinTV HVR-1600 - ATSC HDTV receiver / analog TV tuner / video input ad (1181) Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hauppauge Televison & Video Experts

Luc Francoeur
Luc Francoeur

Level 2 Expert

102 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

72196 Answers

Are you a Hauppauge Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...