Lg bd300 firmware update - LG BD300 Blu-Ray Player

http://www.videohelp.com/dvdhacks/lg-bd300/9734

You have a model that has come out recently, as far as I know no one has yet to create a unlock / hack for this model. yes its possible in theory but who is going todo it? The firmware would need to be edited so the region would be unlocked. At this time can't be unlocked, if it can be please show how and where.

same problem either i get a message that there is a non compatible disk in the drive, or if it plays, it will crash to blue screen in about 30 seconds.

the lens is dead

yes, I had exactly this problem too (even with BBC Dr. Who discs !!)... used my USB stick to upload patch LG_BD_370M_UPG_LG_V7154__02.zip and this did the trick !!

Have you tried updating the player's firmware? Here is a link to download the update software for your player. The software is only for windows 2000 but you should be able to run it in windows 2000 compatibility mode if using xp or vista. A firmware update or re-install may resolve your problem.

http://www.lge.com/us/support/product/support-product-profile.jsp?customerModelCode=BD300&initialTab=documents&targetPage=support-product-profile

If it plays a normal DVD then the answer is maybe. If it played Blu ray before I would try cleaning the eye! If it never played Blu-ray then your unit is bad. Suggest sending it directly back to ther factory!

Rate this answer....

have you tried more than one dvd ?? i have heard that even the slightest mark on a disc and they won't play hope this helps regards Jim

find B2CAppSetup.exe,its program from LG to update firmware of your phone

To set DVD Region to “0”, download file “6000.zip” (often also called “LG6000.zip”) from here:

http://www.multi-region.net/_media/6000.zip

Save the file and then unzip and extract it to your hard drive.

Now burn the subdirectory RMTM0000 and its contents (not the text file) onto a CD-ROM (ISO format, “closed” CD-ROM).

Insert CD-ROM into the LG BD 370 P player, and when the Region Management System screen is displayed, set the Region Code to “0” using your remote. Once done, press “PAUSE” on you remote to save, and you’re done!