Question about Sharp Notevision PG-M20X Multimedia Projector

1 Answer

Red blinking light fan not working and ideas?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 8 Answers

I had the same problem with the blinking red light on my PG-M20X. I looks as if realy RL701 on the main power board is the problem. I removed the cover of the relay and cleaned the contacts. Despite the contacts being worn down it worked great. I have ordered a new relay from Sharp for about $35 to replace it (part # 95CK3102AL001).

Posted on Aug 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my Sanyo PLC-XU51 projector power light blink red?


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/

May 25, 2014 | Sanyo Multimedia Projectors

1 Answer

Dwin TV4 Light will not com eon


I would have thought the red light means a defect. Check the manual for troubleshooting tips. and explanation of the red light functions.

Jan 28, 2014 | Dwin Multimedia Projectors

1 Answer

Toshiba TLP-T60M fan error


I just had the same problem, you have an idea on this?

Nov 26, 2012 | Multimedia Projectors

1 Answer

Replace the 2 bulbs. Unit powered up correctly and turned on like normal. Then Lamp1 and Lamp 2 indicator lights blinked (Indicating Start UP). After some period of time, it switched to Red 6 times blink...


1 red blink every 2.5 seconds indicates a cover error-- for this check the lamp cover
2 times red blinks very 2 seconds indicates temperature error. for this let the projector cool off check filters and fans that there is no blockage of air for proper cool down
3 red blinks every every 2 seconds Power error. incorrect voltage input or internal malfunction.
4 red blinks every 2 seconds indicates Fan Error check the fans make sure they are working and not blocked or need replacing.
i have nothing on 6 ligths go ahead reconect and check for proper count. hope this information helps.
Best of Luck.

Ray.

Jun 05, 2011 | Sanyo PDG-DXT10L Projector

1 Answer

Benq pb8250 , red light blinking


you have a problem with either the fans, the ballast, or the colorwheel. if the fans turn on, listen for a high-pitched whir. if you don't hear it, replace the colorwheel. if you do, replace the ballast. if the fans don't spin, replace them.

Sep 22, 2009 | BenQ PB8250 Multimedia Projector

2 Answers

I have a Sharp PG-m20x notevision when I turn it on the red light blinks, no fan, not working. any ideas?


I had the same problem with the blinking red light on my PG-M20X. It looks as if realy RL701 on the main power board is the problem. I removed the cover of the relay and cleaned the contacts. Despite the contacts being worn down it worked great. I have ordered a new relay from Sharp for about $35 to replace it (part # 95CK3102AL001).

Dec 02, 2008 | Sharp Notevision PG-M20X Multimedia...

2 Answers

Blinking Light on Mitsubishi SL4SU Projector


To jmatthews

Both power light and status light a solid red with no response to any buttons indicates the bulb timer has expired. You need to reset the timer by pressing and holding the left arrow key, the right arrow key and the power button all at the same time for a few seconds.

If there are no problems, the projector will fire up, but you must replace the bulb as it will fail soon and perhaps explode when it does.

Take care

Oct 28, 2008 | Mitsubishi SL4SU ColorView Multimedia...

1 Answer

4805 w/less than 300-400 hours has blinking red light


Yikes. I bet the bearing is bad in the fan and/or the fan is rubbing up against something. It might be an fix.

Jul 16, 2008 | InFocus ScreenPlay 4805 Multimedia...

Not finding what you are looking for?
Sharp Notevision PG-M20X Multimedia Projector Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Multimedia Projectors Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

kc5mgc

Level 1 Expert

8 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sharp Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...